Auto Parts Search
We have info for following modifications of 1999 Chevrolet Monte Carlo
- 1999 Chevrolet Monte Carlo 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:M
- 1999 Chevrolet Monte Carlo 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
BRAKE SERVICE PROCEDURES FOR 1999 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chevrolet Monte Carlo cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Dual Piston Front Disc Brake -> Caliper Service -> Assemble -> Bushing & Boot Replacement -> Disassemble -> Installation -> Mounting Bracket Service -> Removal
Vehicle: 1999 Chevrolet Monte Carlo 3.8 V6 GAS
Removal
- Siphon enough brake fluid out of master cylinder to bring fluid level to 1/3 full to avoid fluid overflow when caliper pistons are pushed back into bores.
- Raise and support vehicle, then remove front wheels.
- Mark relationship between wheel to hub and bearing assembly.
- Push pistons back together into caliper bores using a suitable C-clamp and, if required, a block of wood.
- If caliper assembly is to be serviced, remove inlet fitting attaching bolt, copper washer, and inlet fitting from caliper housing. Plug opening in inlet fitting to prevent fluid loss and contamination. Do no...
CLICK HERE TO GET FULL ACCESS TO 1999 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chevrolet Monte Carlo cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Dual Piston Front Disc Brake -> Brake Pad Service
Vehicle: 1999 Chevrolet Monte Carlo 3.1 V6 GAS
- Remove caliper as outlined under "Caliper Service."
- Lift upward on outward shoe retaining spring of outboard shoe until it clears center lug, then remove shoe from caliper.
- Pull inboard shoe outward to disengage retainer springs from pistons, then remove inbo...
CLICK HERE TO GET FULL ACCESS TO 1999 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chevrolet Monte Carlo cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 1) -> Brake Pad Service
Vehicle: 1999 Chevrolet Monte Carlo 3.1 V6 GAS
- Remove 2/3 of brake fluid from master cylinder reservoir.
- Raise and support vehicle.
- Mark relationship of wheel to axle flange, then remove wheel and tire assembly.
- Using a suitable C-clamp, compress caliper piston enough for clea...
CLICK HERE TO GET FULL ACCESS TO 1999 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chevrolet Monte Carlo cars and light trucks from 1990+.
Anti-lock Brakes -> Delphi (Delco-Moraine) Type VI -> Description -> ABS Warning Lamp -> Brake Warning Lamp -> Electronic Brake Control Module/Electronic Brake & Traction Control Module -> Expansion Spring Brake -> Hydraulic Modulator/Motor Pack Assembly -> System Components -> System Operation -> Wheel Speed Sensors
Vehicle: 1999 Chevrolet Monte Carlo 3.1 V6 GAS
System Operation
The function of the Anti-Lock Brake System (ABS) is to minimize wheel lock-up during heavy braking on most road surfaces. The system performs this function by monitoring wheel speed and controlling the brake fluid pressure to each front wheel and both rear wheels during braking. This allows the driver to retain directional stability and better steering capability.
System Components
Refer to Fig. for system component locations.
Electronic Brake Control Module/Electronic Brake & Traction Control Module
The ABS system is controlled by a microprocessor based Electronic Brak...
CLICK HERE TO GET FULL ACCESS TO 1999 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chevrolet Monte Carlo cars and light trucks from 1990+.
Anti-lock Brakes -> Delphi (Delco-Moraine) Type VI -> System Service -> Alero & Grand Am -> Battery Ground Cable -> Brake System Bleed -> Cavalier & Sunfire -> Component Replacement -> Cutlass & Malibu -> Electronic Brake Control Module (EBCM)/Electronic Brake Traction Control Module (EBTCM) -> Except Metro -> Front -> Hydraulic Modulator Assembly -> Hydraulic Modulator Solenoid -> Hydraulic System Flush -> Intrigue, Lumina & Monte Carlo -> Manual Bleed -> Manual Flush -> Metro -> Pressure Bleed -> Pressure Flush -> Rear -> Rehome -> Scan Tool -> Wheel Speed Sensor
Vehicle: 1999 Chevrolet Monte Carlo 3.8 V6 GAS
Brake System Bleed
Before bleeding the brakes, the front and rear displacement cylinder pistons must be returned to their top most position as outlined under "Rehome."
Rehome
Scan Tool
All Diagnostic Trouble Codes (DTCs) must be repaired and cleared before attempting to rehome displacement cylinder pistons. Using suitably programmed scan tool, follow tool manufacturers instructions.
Pressure Bleed
On Metro models, refer to " Manual Bleed."
Pressure bleeding equipment must have a rubber diaphragm between air supply and brake fluid to prevent air, moisture and other contaminants from entering...
CLICK HERE TO GET FULL ACCESS TO 1999 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Chevrolet Monte Carlo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chevrolet Monte Carlo cars and light trucks from 1990+.
Hydraulic Brake Systems -> General Motors -> Component Service -> Assemble -> Aurora, Bonneville, Eighty-Eight, LeSabre, Park Avenue & Riviera -> Corvette -> CTS -> Disassemble -> Except Aurora, Bonneville, Corvette, CTS, Eighty-Eight, LeSabre, Park Avenue, Riviera & Vibe -> Master Cylinder Overhaul -> Vibe -> Wheel Cylinder Overhaul
Vehicle: 1999 Chevrolet Monte Carlo 3.1 V6 GAS
Master Cylinder Overhaul
Except Aurora, Bonneville, Corvette, CTS, Eighty-Eight, LeSabre, Park Avenue, Riviera & Vibe
Disassemble
Refer to Figs. and , when performing the following procedures.
- Disconnect and plug hydraulic lines.
- Remove mounting nuts and master cylinder.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm.
- Remove fluid level switch, if equipped.
- On models equipped with compact master cylinder, remove proportioner valve, Fig. .
- On all models, depress primary piston and remove lock ring.
- Plug primary fluid outlet (outlet...
CLICK HERE TO GET FULL ACCESS TO 1999 Chevrolet Monte Carlo BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1999 Chevrolet Monte Carlo vehicle. |
Access the Complete guide! |