Auto Parts Search
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Low Oil Level Warning Indicator ->
Vehicle: 1998 Toyota Sienna 3.0 V6 GAS
This lamp lights to indicate that the engine oil level is below a specified level. The lamp will be illuminated during engine start-up. If...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Anti-Lock Brake System (ABS)/Vehicle Stability Control (VSC) System Warning Lamp -> 1998-2002 Sienna
Vehicle: 1998 Toyota Sienna 3.0 V6 GAS
The anti-lock warning lamp is used to warn of a system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system verifies proper anti-lock operation. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After system diagnosis and repair are complete, the lamp can be reset using the following procedures:
- Place ignition switch in On position.
- On models equipped with Nippondenso systems,connect jumper tool No. 09843-18040, or equivalent, to terminals TC and E1 of diagnos...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Low Coolant Lamp ->
Vehicle: 1998 Toyota Sienna 3.0 V6 GAS
This lamp will be illuminated when the coolant level in the radiator drops below a pre-determined point. To reset the lamp, bring the c...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Automatic Transmission Oil Temperature Warning Lamp ->
Vehicle: 1998 Toyota Sienna 3.0 V6 GAS
This lamp will be illuminated when automatic transmission or transfer case fluid temperature exceeds 302°F. If the lamp lights, allow vehicle to operate at idle speed until fluid temperature falls below 248°F; t...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Tire Pressure Warning Lamp -> 1998-06 Sienna -> Relearn -> Reset
Vehicle: 1998 Toyota Sienna 3.0 V6 GAS
Reset
This warning lamp will illuminate when tire pressure falls below a specified psi. When the warning lamp illuminates, check the air pressure of the tire and adjust it to specified pressure. When the vehicle is driven more than 18 mph after the adjustment, the lamp will go off.
Relearn
- Check and adjust tire pressure to manufacturer's specifications.
- Turn the ignition switch to On position.
- Press and the hold tire pressure ...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Sienna AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Sienna cars and light trucks sold in the U.S. from 1990+.
Toyota -> Air Bag Warning Lamp -> 1998-2003 Sienna
Vehicle: 1998 Toyota Sienna 3.0 V6 GAS
- Connect service wires to check connector terminals Tc and AB.
- Place ignition switch in Accessory or On positions and wait approximately 6 seconds.
- Apply body ground to terminals Tc and AB alternately, twice in 1 second intervals be...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Toyota Sienna vehicle. |
Access the Complete guide! |