Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Dodge RAM 1500 Pickup car and truck repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1998 Dodge RAM 1500 Pickup automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1998 Dodge RAM 1500 Pickup

  • 1998 Dodge RAM 1500 Pickup 3.9 V6 GAS, CID:239, Fuel Injection, Aspiration:239, Engine VIN:, Desg:X
  • 1998 Dodge RAM 1500 Pickup 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
  • 1998 Dodge RAM 1500 Pickup 5.9 V8 GAS, CID:360, Fuel Injection, Aspiration:360, Engine VIN:, Desg:Z

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Dodge RAM 1500 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Dodge RAM 1500 Pickup cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> Install -> Rear -> Remove
Vehicle: 1998 Dodge RAM 1500 Pickup 3.9 V6 GAS

Front

  • Remove cotter pin, nut lock, and spring washer from end of outer CV joint stub axle.
  • Loosen (but do not remove) stub axle to hub/bearing retaining nut. Loosen hub nut while vehicle is on the floor with brakes applied. Front hub and driveshaft are splined together and retained by hub nut.
  • Raise vehicle on jack stands or centered on a frame contact type hoist.
  • Remove front tire and wheel assembly from hub.
  • Remove front disc brake caliper assembly to steering knuckle guide pin attaching bolts.
  • Remove disc brake caliper assembly from steering knuckle. Caliper is removed by fi...

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge RAM 1500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Dodge RAM 1500 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Dodge RAM 1500 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> U-Joint with Injected Rings -> U-Joint with Snap Rings
Vehicle: 1998 Dodge RAM 1500 Pickup 5.9 V8 GAS

This procedure describes a propeller shaft equipped with a cardan joint in the tube yoke. For propeller shafts equipped with a companion/slip yoke, repeat the steps to remove the remaining cardan joint.

U-Joint with Snap Rings

Disassemble
  • Tap outside of bearing cap with a drift to loosen snap ring.
  • Remove snap rings from both sides of yoke.
  • Position yoke with grease fitting if equipped, pointing up.
  • Position a socket with a inside diameter large enough to receive bearing cap, beneath yoke on a press.
  • Place another socket with an outside diameter smaller than bearing cap on ...

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge RAM 1500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Dodge RAM 1500 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Dodge RAM 1500 Pickup cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> Install -> Rear -> Remove
Vehicle: 1998 Dodge RAM 1500 Pickup 5.9 V8 GAS

Front

Remove
  • Shift transmission and transfer case to their neutral positions. Raise and support vehicle. Remove skid plate, if equipped.
  • Using a suitable marker, mark a line across yoke at transfer case, link yoke, and propeller shaft yoke at rear of front propeller shaft for installation reference.
  • Mark a line across propeller shaft yoke and pinion shaft yoke for installation reference.
  • Remove universal joint strap bolts at pinion shaft yoke.
  • Remove bolts holding propeller shaft to transfer case yoke flange.
  • Remove propeller shaft.
Install
  • Position front propeller shaft under vehicl...

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge RAM 1500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Dodge RAM 1500 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Dodge RAM 1500 Pickup cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> Install -> Rear -> Remove
Vehicle: 1998 Dodge RAM 1500 Pickup 5.2 V8 GAS

Front

Remove
  • Shift transmission and transfer case to their neutral positions. Raise and support vehicle. Remove skid plate, if equipped.
  • Using a suitable marker, mark a line across yoke at transfer case, link yoke, and propeller shaft yoke at rear of front propeller shaft for installation reference.
  • Mark a line across propeller shaft yoke and pinion shaft yoke for installation reference.
  • Remove universal joint strap bolts at pinion shaft yoke.
  • Remove bolts holding propeller shaft to transfer case yoke flange.
  • Remove propeller shaft.
Install
  • Position front propeller shaft under vehicl...

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge RAM 1500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Dodge RAM 1500 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Dodge RAM 1500 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> U-Joint with Injected Rings -> U-Joint with Snap Rings
Vehicle: 1998 Dodge RAM 1500 Pickup 3.9 V6 GAS

  • Raise and support vehicle.
  • Mark orientation of propeller shaft rear flange.
  • Using suitable jack stand, support propeller shaft. Do not allow propeller shaft to hang unsupported.
  • Remove propeller shaft rear mounting bolts and support end of propeller shaft.
  • Mark orientation of propeller shaft front flange.
  • Remove propeller shaft front mounting bolts and remove propel...

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge RAM 1500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Dodge RAM 1500 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Dodge RAM 1500 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> U-Joint with Injected Rings -> U-Joint with Snap Rings
Vehicle: 1998 Dodge RAM 1500 Pickup 5.2 V8 GAS

This procedure describes a propeller shaft equipped with a cardan joint in the tube yoke. For propeller shafts equipped with a companion/slip yoke, repeat the steps to remove the remaining cardan joint.

U-Joint with Snap Rings

Disassemble
  • Tap outside of bearing cap with a drift to loosen snap ring.
  • Remove snap rings from both sides of yoke.
  • Position yoke with grease fitting if equipped, pointing up.
  • Position a socket with a inside diameter large enough to receive bearing cap, beneath yoke on a press.
  • Place another socket with an outside diameter smaller than bearing cap on ...

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge RAM 1500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

Click here to view more details about 2001 Dodge Ram 1500 Step Bumper2001 Dodge Ram 1500 Step Bumper, A High Quality, Direct Fit OE Replacement For Step Bumper Mount Kit.

Source: Auto Body Parts Store

$44.07

Click here to view more details about 2002 Dodge Ram 1500 Bumper, Front2002 Dodge Ram 1500 Bumper, Front.

Source: Auto Body Parts Store

$188.07

Click here to view more details2007 Dodge Caravan Radiator, Radiator; 3.3LTR/3.6LTR/3.8LTR; 6 Cylinder Automatic Transmission [Must Remove Top Bracket For Applications Built After 1/31/05], , .

Source: Wheels / Rims, Mirrors & Lights Store

$98.45

Click here to view more details2002 Dodge Ram 1500 Pickup V6, 3.7 L, 225 CID Rebuilt Engine, Warranty: 3-Year/100,000 Mile, .

Source: Rebuilt Engines Store

$2,505.00

Click here to view more details1995 Dodge RAM 1500 Pickup Used Wiper Motor Front, Very Good.

Source: Used Auto Parts Store

$70.00

Click here to view more details1997 Dodge RAM 1500 Pickup Used Wiper Motor Front, Very Good.

Source: Used Auto Parts Store

$62.00
More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Dodge RAM 1500 Pickup vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
GOT A WEBSITE?Make money with Automotix

Make money with Automotix Partner Program.

Learn more

Auto Repair Quick Search
Help me find