1998 Dodge Intrepid Brake Service (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Dodge Intrepid car and truck repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1998 Dodge Intrepid automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1998 Dodge Intrepid

  • 1998 Dodge Intrepid 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
  • 1998 Dodge Intrepid 3.2 V6 GAS, CC:3200, CID:197, Fuel Injection, Aspiration:197, Engine VIN:, Desg:J

BRAKE SERVICE PROCEDURES FOR 1998 Dodge Intrepid AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Dodge Intrepid cars and light trucks from 1990+.

Disc Brakes -> Type 5-Kelsey-Hayes Dual Pin Floating Caliper Disc Brake, Rear -> Description
Vehicle: 1998 Dodge Intrepid 3.2 V6 GAS

This single piston, floating caliper rear disc brake assembly, Fig. , includes a hub assembly, adapter, rotor, caliper, shoes and pads. The parking brake system consists of a small duo-servo brake mounted to an adapter which expands out against the hat section on the inside of the roto...

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Intrepid BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1998 Dodge Intrepid AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Dodge Intrepid cars and light trucks from 1990+.

Hydraulic Brake Systems -> Master Cylinder Applications
Vehicle: 1998 Dodge Intrepid 2.7 V6 GAS

[[table data]]

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Intrepid BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1998 Dodge Intrepid AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Dodge Intrepid cars and light trucks from 1990+.

Hydraulic Brake Systems -> Hydraulic Brake System Controls -> 1998 Breeze, Cirrus, Sebring Convertible & Stratus -> Anti-Lock Brake System -> Description -> Less ABS Except Models w/TLEV -> Less Anti-Lock Brake System -> Neon less ABS, 1997 Breeze, Cirrus, Sebring Convertible & Stratus -> Neon, 1997 Breeze, Cirrus, Sebring Convertible, & Stratus -> Testing -> Type 1 Proportioning Valve -> Type 2 Proportioning Valves -> Type 3 Proportioning Valves -> With ABS & Non-ABS w/TLEV
Vehicle: 1998 Dodge Intrepid 2.7 V6 GAS

Type 1 Proportioning Valve

Testing
  • Install suitable pressure gauges, one each on input side and output side of proportioning valve as shown in Fig. .
  • Bleed brake line and pressure gauge, then gradually depress brake pedal and observe gauge readings. Refer to "Hydraulic Brake Controls Specifications" chart.
  • Observe left and right output pressures.
  • Pressure difference between left and right should not be greater than 57 psi.
  • If gauge readings are not within specifications, replace proportioning valve.

Type 2 Proportioning Valves

Description

This system uses proportioning val...

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Intrepid BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1998 Dodge Intrepid AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Dodge Intrepid cars and light trucks from 1990+.

Drum Brakes -> Type 1: Kelsey-Hayes & Varga Leading-Trailing Drum Brakes -> Precautions
Vehicle: 1998 Dodge Intrepid 2.7 V6 GAS

When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust. During routine service operations, the amount of asbestos dust from brake lining wear is at a low level due to a chemical breakdown during use. A few precautions will minimize exposure.

Do not sand or grind brake linings unless suitable exhaust ventilation equipment is used to prevent excessive asbestos exposure.

  • Wear a suitable respirator approved for asbestos dust use during all repair procedures.
  • When cleaning brake dust from brake parts, use a vacuum cleaner with a highly efficient fi...

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Intrepid BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1998 Dodge Intrepid AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Dodge Intrepid cars and light trucks from 1990+.

Disc Brakes -> Type 4-Kelsey-Hayes Dual Pin Floating Caliper Disc Brake, Front -> Caliper Service -> Assemble -> Disassemble -> Overhaul -> Replacement
Vehicle: 1998 Dodge Intrepid 3.2 V6 GAS

Replacement
  • Raise and support vehicle.
  • Remove front wheel and tire assembly.
  • Remove two caliper to steering knuckle guide pin bolts.
  • Remove brake caliper from steering knuckle as follows:
    • Rotate bottom end of caliper away from knuckle.
    • Slide top of caliper down from machined abutment on steering knuckle.
  • Support caliper to prevent weight from being applied to brake hose.
Overhaul
Disassemble
  • Remove caliper assembly as described under "Brake Pad, Service."
  • Place a wood block between caliper piston and caliper fingers. With brake hose attached to caliper, carefully depress brake pedal to push ...

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Intrepid BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1998 Dodge Intrepid AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Dodge Intrepid cars and light trucks from 1990+.

Drum Brakes -> Type 1: Kelsey-Hayes & Varga Leading-Trailing Drum Brakes -> Tightening Specifications
Vehicle: 1998 Dodge Intrepid 3.2 V6 GAS

[[table data]]

CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Intrepid BRAKE SERVICE PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Dodge Intrepid vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find