Auto Parts Search
We have info for following modifications of 1998 Dodge Durango
- 1998 Dodge Durango 3.9 V6 GAS, CID:239, Fuel Injection, Aspiration:239, Engine VIN:, Desg:X
- 1998 Dodge Durango 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
- 1998 Dodge Durango 5.9 V8 GAS, CID:360, Fuel Injection, Aspiration:360, Engine VIN:, Desg:Z
SERPENTINE BELT SERVICE PROCEDURES FOR 1998 Dodge Durango AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 1998 Dodge Durango cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Installation -> Removal
Vehicle: 1998 Dodge Durango 5.2 V8 GAS
Removal
The automatic tensioner is equipped with an indexing arrow on the back of tensioner housing. If a new belt is being installed, arrow must be within approximately 1/8 inch of indexing mark. If an old belt is being used, it must not pass the indexing point.
- Attach a suitable wrench to automatic tensioner pulley mounting bolt.
- Rotate tensioner assembly clockwise until tension has been relieved.
- Remove belt from idler puller...
CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Durango SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1998 Dodge Durango AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 1998 Dodge Durango cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Installation -> Removal
Vehicle: 1998 Dodge Durango 3.9 V6 GAS
Removal
The automatic tensioner is equipped with an indexing arrow on the back of tensioner housing. If a new belt is being installed, arrow must be within approximately 1/8 inch of indexing mark. If an old belt is being used, it must not pass the indexing point.
- Attach a suitable wrench to automatic tensioner pulley mounting bolt.
- Rotate tensioner assembly clockwise until tension has been relieved.
- Remove belt from idler puller...
CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Durango SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1998 Dodge Durango AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 1998 Dodge Durango cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Installation -> Removal
Vehicle: 1998 Dodge Durango 5.9 V8 GAS
Removal
The automatic tensioner is equipped with an indexing arrow on the back of tensioner housing. If a new belt is being installed, arrow must be within approximately 1/8 inch of indexing mark. If an old belt is being used, it must not pass the indexing point.
- Attach a suitable wrench to automatic tensioner pulley mounting bolt.
- Rotate tensioner assembly clockwise until tension has been relieved.
- Remove belt from idler puller...
CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Durango SERPENTINE BELT SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Dodge Durango vehicle. |
Access the Complete guide! |