Auto Parts Search
We have info for following modifications of 1998 Chevrolet Tahoe
- 1998 Chevrolet Tahoe 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:R
- 1998 Chevrolet Tahoe 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:S
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Tahoe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Tahoe cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Height Sensing Proportioning Valve
Vehicle: 1998 Chevrolet Tahoe 5.7 V8 GAS
Height Sensing Proportioning Valve
The height sensing proportioning valve must be adjusted whenever the valve and/or linkage is disassembled or removed for service. In addition, adjustment should be checked if excessive front wheel lock-up is experienced with a lower than desired brake application rate when vehicle is at or near maximum GVWR.
- Raise and support vehicle, leave wheels on and allow axle to hang freely.
- Remove lever retaining nut and disconnect lever from valve shaft, Fig. .
- Rotate valve shaft to permit installation of correct adjustment gauge, Fig. , ensure D shaped ho...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Tahoe BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Tahoe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Tahoe cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> General Service
Vehicle: 1998 Chevrolet Tahoe 5.7 V8 GAS
Certain general service procedures apply, regardless of whether the brakes are vacuum or hydraulically assisted. Only top quality, clean brake fluid should be used. More seals and valves are used with power brake systems than with ordinary brakes, so an inferior brake fluid will do much more damage. For the same reason, ensure all dirt is kept out of the system. Additionally, on models with hydraulic assist brakes, care must be taken not to mix the fluids of the booster hydraulic system and brake hydraulic system as the fluids are not compatible.
If the power unit fails, the brak...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Tahoe BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Tahoe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Tahoe cars and light trucks from 1990+.
Drum Brakes -> Tightening Specifications;
Vehicle: 1998 Chevrolet Tahoe 6.5 V8 DIESEL
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Tahoe BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Tahoe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Tahoe cars and light trucks from 1990+.
Power Brake Units -> Bendix Brake Booster -> Troubleshooting -> Accumulator Leak-Down, System Does Not Hold Charge -> Grabby Brakes Or Booster Chatters/Pedal Vibrates -> Slow Brake Pedal Return
Vehicle: 1998 Chevrolet Tahoe 5.7 V8 GAS
Slow Brake Pedal Return
- Excessive seal friction in booster.
- Faulty spool action.
- Restriction in return line from booster to pump reservoir.
- Damaged input rod end.
Grabby Brakes Or Booster Chatters/Pedal Vibrates
- Faulty spool action caused by contamination in sys...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Tahoe BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Tahoe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Tahoe cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Height Sensing Proportioning Valve
Vehicle: 1998 Chevrolet Tahoe 6.5 V8 DIESEL
Height Sensing Proportioning Valve
The height sensing proportioning valve must be adjusted whenever the valve and/or linkage is disassembled or removed for service. In addition, adjustment should be checked if excessive front wheel lock-up is experienced with a lower than desired brake application rate when vehicle is at or near maximum GVWR.
- Raise and support vehicle, leave wheels on and allow axle to hang freely.
- Remove lever retaining nut and disconnect lever from valve shaft, Fig. .
- Rotate valve shaft to permit installation of correct adjustment gauge, Fig. , ensure D shaped ho...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Tahoe BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Chevrolet Tahoe AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Chevrolet Tahoe cars and light trucks from 1990+.
Power Brake Units -> Bendix Brake Booster -> Power Brake Unit Service -> Accumulator Service -> Assemble -> Booster Bleed -> Cleaning & Inspection -> Disassemble
Vehicle: 1998 Chevrolet Tahoe 6.5 V8 DIESEL
Disassemble
- Place accumulator compressor tool No. J-26889, or equivalent, around end of accumulator.
- Install nut onto stud as shown in Fig. , then depress the accumulator with a C-clamp.
- Remove retainer by using a punch.
- Release C-clamp and remove accumulator compressor tool.
- Remove accumulator, O-ring, retainer, plug and spring, Fig. .
- Remove retainer, output pushrod, baffle, piston return spring and retainer.
- Using a suitable saw, cut off eyelet of pedal rod, then remove the boot.
- Remove nut, bracket and bolts, then separate cover from housing.
- Remove piston assembly and seal...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Tahoe BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Chevrolet Tahoe vehicle. |
Access the Complete guide! |