Auto Parts Search
We have info for following modifications of 1997 Nissan Altima
- 1997 Nissan Altima GLE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:B
- 1997 Nissan Altima GXE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:B
- 1997 Nissan Altima SE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:B
- 1997 Nissan Altima XE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:B
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Nissan Altima AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Nissan Altima cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1997 Nissan Altima GLE 2.4 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove cotter pin then wheel bearing lock nut using suitable tool.
- Remove brake caliper assembly and rotor using suitable tool. Brake hose does not need to be disconnected from brake caliper. Suspend caliper assembly using mechanics wire.
- Remove nuts and bolts between side flange and driveshaft with suitable tool.
- Remove driveshaft using suitable tool. When removing driveshaft, do not apply an excessive angle to driveshaft joint. Use care not to excessively slid...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Altima DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Nissan Altima AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Nissan Altima cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1997 Nissan Altima SE 2.4 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove cotter pin then wheel bearing lock nut using suitable tool.
- Remove brake caliper assembly and rotor using suitable tool. Brake hose does not need to be disconnected from brake caliper. Suspend caliper assembly using mechanics wire.
- Remove nuts and bolts between side flange and driveshaft with suitable tool.
- Remove driveshaft using suitable tool. When removing driveshaft, do not apply an excessive angle to driveshaft joint. Use care not to excessively slid...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Altima DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Nissan Altima AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Nissan Altima cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1997 Nissan Altima GXE 2.4 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove cotter pin then wheel bearing lock nut using suitable tool.
- Remove brake caliper assembly and rotor using suitable tool. Brake hose does not need to be disconnected from brake caliper. Suspend caliper assembly using mechanics wire.
- Remove nuts and bolts between side flange and driveshaft with suitable tool.
- Remove driveshaft using suitable tool. When removing driveshaft, do not apply an excessive angle to driveshaft joint. Use care not to excessively slid...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Altima DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Nissan Altima AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Nissan Altima cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1997 Nissan Altima XE 2.4 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove cotter pin then wheel bearing lock nut using suitable tool.
- Remove brake caliper assembly and rotor using suitable tool. Brake hose does not need to be disconnected from brake caliper. Suspend caliper assembly using mechanics wire.
- Remove nuts and bolts between side flange and driveshaft with suitable tool.
- Remove driveshaft using suitable tool. When removing driveshaft, do not apply an excessive angle to driveshaft joint. Use care not to excessively slid...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Altima DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1997 Nissan Altima vehicle. |
Access the Complete guide! |