Auto Parts Search
We have info for following modifications of 1996 Toyota RAV4
- 1996 Toyota RAV4 2.0 L4 GAS, CC:1998, Fuel Injection, Engine VIN:, Desg:P
- 1996 Toyota RAV4 2-DOOR 2.0 L4 GAS, CC:1998, Fuel Injection, Engine VIN:, Desg:P
BRAKE SERVICE PROCEDURES FOR 1996 Toyota RAV4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota RAV4 cars and light trucks from 1990+.
POWER BRAKE UNITS -> DIAGNOSIS & TESTING -> Air Tightness Check -> Brake Booster Operational Test -> Operating Check
Vehicle: 1996 Toyota RAV4 2.0 L4 GAS
Brake Booster Operational Test
Operating Check
- Depress brake pedal several times with engine stopped, and ensure pedal reserve distance has no change, Fig. .
- Depress brake pedal and start engine. If pedal drops slightly, operation is normal.
Air Tightness Check
- Start engine and stop after one or two minutes.
- Depress brake peda...
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota RAV4 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Toyota RAV4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota RAV4 cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS -> COMPONENT SERVICE -> Assembly -> Disassembly -> Inspection -> Master Cylinder -> Wheel Cylinders
Vehicle: 1996 Toyota RAV4 2-DOOR 2.0 L4 GAS
Master Cylinder
Disassembly
For the following procedures, refer to Fig. for assistance.
- Remove master cylinder boot.
- Remove setscrew and then reservoir tank. Remove cap and strainer from reservoir.
- Remove two grommets. Then place cylinder in vise.
- Push piston in and remove stopper bolt, Fig. .
- Push pistons in and remove snap ring. Then carefully remove No. 1 piston by hand.
- Place cylinder on edges of two wooden blocks and tap on cylinder until No. 2 piston comes out.
Inspection
Clean parts with compressed air. Inspect cylinder bore for rust and scoring. Also, inspect for wear o...
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota RAV4 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Toyota RAV4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota RAV4 cars and light trucks from 1990+.
DRUM BRAKES -> APPLICATION CHART
Vehicle: 1996 Toyota RAV4 2-DOOR 2.0 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota RAV4 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Toyota RAV4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota RAV4 cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS -> BRAKE SYSTEM BLEED -> Brake Lines -> Master Cylinder
Vehicle: 1996 Toyota RAV4 2.0 L4 GAS
Master Cylinder
- Fill reservoir with fluid.
- Disconnect tubes from master cylinder. Then slowly depress brake pedal and hold.
- Block off outlet holes with fingers, and release pedal. Repeat three or four times.
Brake Lines
Bleed wheel with longest brake line first, then work your way...
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota RAV4 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Toyota RAV4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota RAV4 cars and light trucks from 1990+.
POWER BRAKE UNITS -> PRECAUTIONS -> Audio Coded Anti-Theft System
Vehicle: 1996 Toyota RAV4 2.0 L4 GAS
Audio Coded Anti-Theft System
Some models are equipped with an audio coded anti-theft system that will disable the radio when the battery cable is disconnected. The system can be identified by the "ANTI-THEFT SYSTEM" on the cassette tape lid. Obtain 3 digit customer code for input. Reset system after service as follows:
- Obtain 3 digit audio anti-theft code.
- Depress 1 (PROG) while depressing righthand side of TUNE SEEK button, - - - will appear in tape operation display.
- To enter the first digit, depress 1 (PROG) button repeatedly until the number of times depressed equals the first digit ...
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota RAV4 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Toyota RAV4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota RAV4 cars and light trucks from 1990+.
DISC BRAKES -> Front Disc Brakes -> CALIPER SERVICE -> 1996 4Runner -> Avalon, Camry, Corolla & Celica -> Caliper, Replace -> Land Cruiser, 4WD Pickup, 1993-95 4Runner & T100 -> Overhaul -> Paseo -> Pickup & 1993-95 4Runner w/FS17 & F18 Type Disc, 2WD -> Pickup & 1993-95 4Runner w/PD60 & PD66 Type Disc & T100, 2WD -> Previa & Supra -> RAV4 -> Tacoma 2WD -> Tercel
Vehicle: 1996 Toyota RAV4 2.0 L4 GAS
Tercel
Caliper, Replace
- Raise and support front of vehicle, then remove wheel and tire assembly.
- Disconnect brake hydraulic line from frame bracket and from caliper using line wrench tool No. 09751-36011, or equivalent.
- Remove caliper mounting bolts, then the caliper.
- Reverse procedure to install and bleed brake system.
Overhaul
- Remove caliper as outlined under "Caliper, Replace."
- Remove anti-squeal shim(s) and cylinder boot set ring, Fig. .
- Remove cylinder boot, then remove piston using compressed air.
- Remove piston seal, caliper sliding bolt, dust boot, collar and union.
- Inst...
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota RAV4 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Toyota RAV4 vehicle. |
Access the Complete guide! |