Auto Parts Search
We have info for following modifications of 1996 Subaru Legacy
- 1996 Subaru Legacy L 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:4
- 1996 Subaru Legacy L 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:3
- 1996 Subaru Legacy LS 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:4
- 1996 Subaru Legacy LSI 2.5 H4 GAS, CC:2458, Fuel Injection, Engine VIN:, Desg:6
- 1996 Subaru Legacy GT 2.5 H4 GAS, CC:2458, Fuel Injection, Engine VIN:, Desg:6
- 1996 Subaru Legacy Brighton 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:4
- 1996 Subaru Legacy Outback 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:4
- 1996 Subaru Legacy Outback 2.5 H4 GAS, CC:2458, Fuel Injection, Engine VIN:, Desg:6
- 1996 Subaru Legacy Postal 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:4
BRAKE SERVICE PROCEDURES FOR 1996 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru Legacy cars and light trucks from 1990+.
Anti-lock Brakes -> 1996 Legacy w/Bosch 5.3 -> Diagnosis & Testing -> Accessing Trouble Codes -> Clearing Trouble Codes -> Component Testing -> Trouble Code Interpretation
Vehicle: 1996 Subaru Legacy Postal 2.2 H4 GAS
Accessing Trouble Codes
When the control module detects a problem, the information (up to a maximum of three) will be stored in the EEPROM as a trouble code. When there are more than three, the most recent three will be stored. Stored codes will stay in memory until they are cleared.
- Remove ABS check connector from under side of drivers side heater unit, Fig. .
- Turn ignition switch off, then ground ABS check connector terminal No. 6 to diagnosis terminal.
- Turn ignition switch to the On position. ABS warning light is now in the diagnostic mode and will blink to identify tr...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru Legacy cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster, Replace -> Except SVX -> Overhaul -> SVX
Vehicle: 1996 Subaru Legacy GT 2.5 H4 GAS
Brake Booster, Replace
Except SVX
- Disconnect brake fluid level indicator connector, if equipped.
- Remove master cylinder assembly.
- Disconnect vacuum hose from brake booster.
- Working from inside the passenger compartment, remove snap pin and operating rod clevis pin from brake pedal assembly.
- Remove brake booster retaining nuts, then brake booster from vehicle.
- Reverse procedure to install. Torque brake booster retaining nuts to 9-17 ft. lbs.
SVX
- Disconnect battery ground cable.
- Raise and support vehicle and remov...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru Legacy cars and light trucks from 1990+.
Anti-lock Brakes -> 1996 Legacy w/Bosch 5.3 -> Troubleshooting -> Inspection Mode -> Preliminary Inspection
Vehicle: 1996 Subaru Legacy LS 2.2 H4 GAS
Refer to Figs. and , for troubleshooting procedure and Fig. for wiring diagram.
Preliminary Inspection
- Ensure battery voltage is 12 volts or more.
- Ensure specific gravity of battery is 1.260.
- Check condition of main and other fuses, harnesses and connector. Also check for proper grounding.
- Check brake fluid level and for leakage.
- Check for brake drag, brake pad and rotor condition.
- Ensure tires are in good condition and at specified air pressu...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru Legacy cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Dual Proportioning Valve -> Master Cylinder
Vehicle: 1996 Subaru Legacy Outback 2.2 H4 GAS
Master Cylinder
- Disconnect brake lines from master cylinder and plug the ends.
- If applicable, disconnect fluid warning switch electrical connector.
- Remove master cylinder retaining nuts and the master cylinder.
- Reverse procedure to install.
- Bleed hydraulic system after completing installation.
Dual Proportioning Valve
Inspect brake line connections at DPV for fluid le...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru Legacy cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster, Replace -> Except SVX -> Overhaul -> SVX
Vehicle: 1996 Subaru Legacy Outback 2.2 H4 GAS
Brake Booster, Replace
Except SVX
- Disconnect brake fluid level indicator connector, if equipped.
- Remove master cylinder assembly.
- Disconnect vacuum hose from brake booster.
- Working from inside the passenger compartment, remove snap pin and operating rod clevis pin from brake pedal assembly.
- Remove brake booster retaining nuts, then brake booster from vehicle.
- Reverse procedure to install. Torque brake booster retaining nuts to 9-17 ft. lbs.
SVX
- Disconnect battery ground cable.
- Raise and support vehicle and remov...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Subaru Legacy cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> Drum Brake -> Parking Brake
Vehicle: 1996 Subaru Legacy Outback 2.5 H4 GAS
Parking Brake
- On models except Impreza, pull parking brake lever three to five times. Mechanism should click six to seven times when a force of 55 lbs. is exerted on the lever.
- On Impreza, pull parking brake lever three to five times. Mechanism should click six times when a force of 44 lbs. is exerted on the lever.
- On Loyale, if lever operation is not as specified, rotate the equalizer cable adjustment nut until play at " A" in Fig. , is set at 0-.02 inch (0-.5mm).
- On Justy, if lever operation is not as specified, adjust lever stroke at parking brake rod until ...
CLICK HERE TO GET FULL ACCESS TO 1996 Subaru Legacy BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Subaru Legacy vehicle. |
Access the Complete guide! |