Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Mazda 626 car and truck
repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Mazda 626 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1996 Mazda 626
- 1996 Mazda 626 DX 2.0 L4 GAS, CC:1991, Fuel Injection
- 1996 Mazda 626 LX 2.5 V6 GAS, CC:2497, Fuel Injection
- 1996 Mazda 626 LX 2.0 L4 GAS, CC:1991, Fuel Injection
- 1996 Mazda 626 ES 2.5 V6 GAS, CC:2497, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Mazda 626 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Mazda 626 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Mazda 626 LX 2.5 V6 GAS
- Raise and support vehicle.
- Remove tires and wheels.
- Drain oil from transaxle.
- Remove hub nut.
- Remove splash shield.
- Remove stabilizer bar attaching nuts and stabilizer bar from lower control arm.
- Remove tie rod end nut and remove tie rod end from steering knuckle.
- Remove ball joint nut and remove ball joint from lower control arm.
- On models with automatic transaxle, on left side only, remove engine mount member.
- On all models, using a suitable pry bar, pry driveshaft out...
CLICK HERE TO GET FULL ACCESS TO 1996 Mazda 626 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Mazda 626 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Mazda 626 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Mazda 626 ES 2.5 V6 GAS
- Raise and support vehicle.
- Remove tires and wheels.
- Drain oil from transaxle.
- Remove hub nut.
- Remove splash shield.
- Remove stabilizer bar attaching nuts and stabilizer bar from lower control arm.
- Remove tie rod end nut and remove tie rod end from steering knuckle.
- Remove ball joint nut and remove ball joint from lower control arm.
- On models with automatic transaxle, on left side only, remove engine mount member.
- On all models, using a suitable pry bar, pry driveshaft out...
CLICK HERE TO GET FULL ACCESS TO 1996 Mazda 626 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Mazda 626 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Mazda 626 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Mazda 626 DX 2.0 L4 GAS
- Raise and support vehicle.
- Remove tires and wheels.
- Drain oil from transaxle.
- Remove hub nut.
- Remove splash shield.
- Remove stabilizer bar attaching nuts and stabilizer bar from lower control arm.
- Remove tie rod end nut and remove tie rod end from steering knuckle.
- Remove ball joint nut and remove ball joint from lower control arm.
- On models with automatic transaxle, on left side only, remove engine mount member.
- On all models, using a suitable pry bar, pry driveshaft out of tra...
CLICK HERE TO GET FULL ACCESS TO 1996 Mazda 626 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Mazda 626 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Mazda 626 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Mazda 626 LX 2.0 L4 GAS
- Raise and support vehicle.
- Remove tires and wheels.
- Drain oil from transaxle.
- Remove hub nut.
- Remove splash shield.
- Remove stabilizer bar attaching nuts and stabilizer bar from lower control arm.
- Remove tie rod end nut and remove tie rod end from steering knuckle.
- Remove ball joint nut and remove ball joint from lower control arm.
- On models with automatic transaxle, on left side only, remove engine mount member.
- On all models, using a suitable pry bar, pry driveshaft out of tra...
CLICK HERE TO GET FULL ACCESS TO 1996 Mazda 626 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1996 Mazda 626 vehicle.
|
| Access the Complete guide! |
