Auto Parts Search
We have info for following modifications of 1996 Ford Probe
- 1996 Ford Probe GT 2.5 V6 GAS, CC:2450, CID:152, Fuel Injection, Aspiration:152, Engine VIN:, Desg:B
- 1996 Ford Probe SE 2.0 L4 GAS, CC:1989, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:A
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1996 Ford Probe AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 1996 Ford Probe cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 1996 Ford Probe SE 2.0 L4 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Reposition heater core inlet hose clamp at water hose connection.
- Remove hose from water hose connection.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Drain cooling system into a suitable container.
- Reposition heater hose outlet clamp at heater core.
- Disconnect heater outlet hose from hea...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Probe RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1996 Ford Probe AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 1996 Ford Probe cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 1996 Ford Probe GT 2.5 V6 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from water hose connection.
- Remove radiator outlet hose from water hose connection.
- Reposition hose clamp from radiator.
- Remove radiator outlet hose from radiator and from vehicle.
- Reverse procedu...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Probe RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1996 Ford Probe AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 1996 Ford Probe cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 1996 Ford Probe SE 2.0 L4 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from water hose connection.
- Remove radiator outlet hose from water hose connection.
- Reposition hose clamp from radiator.
- Remove radiator outlet hose from radiator and from vehicle.
- Reverse procedu...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Probe RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1996 Ford Probe AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 1996 Ford Probe cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 1996 Ford Probe GT 2.5 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Reposition heater core inlet hose clamp at water hose connection.
- Remove hose from water hose connection.
- Remove hose from vehicle.
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Probe RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1996 Ford Probe AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 1996 Ford Probe cars and light trucks from 1990+
Radiator, Replace
Vehicle: 1996 Ford Probe GT 2.5 V6 GAS
Allow radiator to cool prior to beginning following procedure. Slowly remove radiator cap to release system pressure. Caution must be used as system contains scalding hot fluid which when under pressure can blow out of radiator fill neck, causing personal injury.
- Slowly remove radiator cap, then open drain valve at bottom of radiator and drain system.
- Remove fresh air duct.
- Remove upper and lower radiator hoses.
- Remove radiator overflow hose.
- Remove coolant expansion tank.
- Disconnect cooling fan motor and A/C condenser cooling fan motor electrical c...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Probe RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1996 Ford Probe AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 1996 Ford Probe cars and light trucks from 1990+
Radiator, Replace
Vehicle: 1996 Ford Probe SE 2.0 L4 GAS
Allow radiator to cool prior to beginning following procedure. Slowly remove radiator cap to release system pressure. Caution must be used as system contains scalding hot fluid which when under pressure can blow out of radiator fill neck, causing personal injury.
- Slowly remove radiator cap, then open drain valve at bottom of radiator and drain system.
- Remove fresh air duct.
- Remove upper and lower radiator hoses.
- Disconnect overflow hose.
- Disconnect...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Probe RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Ford Probe vehicle. |
Access the Complete guide! |