Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1995 Nissan Sentra car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1995 Nissan Sentra automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1995 Nissan Sentra
- 1995 Nissan Sentra 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:A
- 1995 Nissan Sentra GXE 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:A
- 1995 Nissan Sentra XE 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:A
- 1995 Nissan Sentra GLE 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:A
BRAKE SERVICE PROCEDURES FOR 1995 Nissan Sentra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan Sentra cars and light trucks from 1990+.
DISC BRAKES -> BRAKE PAD SERVICE -> AD14VB & OPZ11VB -> Except AD14VB, OPZ11V & OPZ11VB -> Front -> OPZ11V -> Rear
Vehicle: 1995 Nissan Sentra XE 1.6 L4 GAS
Front
- Raise and support front of vehicle and remove wheel.
- Remove brake hose lock spring if necessary and lower pin bolt Figs. through , then pivot caliper body upwards.
- Remove pad retainers, inner and outer shims and the pads.
- Install new inner pad and pivot caliper downward.
- Compress piston(s) by inserting bar through caliper opening and prying against torque member.
- Pivot caliper upwards, then install outer pad, inner and outer shims and pad retainers.
- Position caliper body and install lower pin.
Rear
Except AD14VB, OPZ11V & OPZ11VB
- Raise and support rear of vehicle and remove wheel...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan Sentra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Nissan Sentra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan Sentra cars and light trucks from 1990+.
DRUM BRAKES -> BRAKE SERVICE -> Altima -> Maxima -> Pathfinder & Pickup -> Quest -> Sentra, NX 1600, NX 2000 & 200SX
Vehicle: 1995 Nissan Sentra GXE 1.6 L4 GAS
Altima
- Raise and support rear of vehicle, then remove rear wheel.
- Fully release parking brake.
- Remove brake drum, if drum is hard to remove, proceed as follows:
- Remove plug from rear side of backing plate.
- Using a suitable tool, push stopper towards backing plate to gain clearance between brake shoe and drum as shown in Fig. .
- Install two bolts into outside of brake drum as shown in Fig. , then gradually tighten the two bolts until drum separates from the brake shoes.
- Push in shoe hold-down pins from behind backing plate, Fig. .
- Pull out brake shoes.
- Using pliers, remove lower...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan Sentra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Nissan Sentra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan Sentra cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS -> BRAKE SYSTEM BLEED -> Anti-Lock Brakes -> Less Anti-Lock Brakes
Vehicle: 1995 Nissan Sentra XE 1.6 L4 GAS
Less Anti-Lock Brakes
Do not spill brake fluid on painted surfaces, it may cause damage to the paint. If brake fluid is spilled, wash immediately with water.
- Place container under master cylinder to avoid spillage, then fill master cylinder with brake fluid.
- Connect hose to bleeder valves, then depress brake pedal several times.
- With pressure applied to pedal open bleeder valve to release air trapped in system.
- Close bleeder, then release pedal slowly.
- Repeat steps 3 and 4 as outlined above until all air is removed from system.
- Bleed air from system in order as follows:
- Left rear whe...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan Sentra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Nissan Sentra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan Sentra cars and light trucks from 1990+.
DISC BRAKES -> CALIPER SERVICE -> AD14VB, OPZ11V & OPZ11VB -> Except AD14VB, OPZ11V & OPZ11VB -> Front -> Overhaul -> Rear -> Replacement
Vehicle: 1995 Nissan Sentra XE 1.6 L4 GAS
Front
Replacement
- Raise and support front of vehicle and remove wheel.
- Disconnect brake hose from brake tube.
- Remove caliper assembly from spindle.
- Reverse procedure to install.
Overhaul
- Remove pin bolts and separate cylinder body from torque member, Figs. through .
- Remove pad retainers, shims and brake pads.
- Feed compressed air gradually into caliper port and force out piston(s) with dust seals.
- Remove piston seals, sub pins, main pins and dust seals, Fig. through .
- Reverse procedure to assemble.
Rear
Replacement
Except AD14VB, OPZ11V & OPZ11VB
- Disconnect parking brake cable a...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan Sentra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Nissan Sentra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan Sentra cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS -> BRAKE SYSTEM BLEED -> Anti-Lock Brakes -> Less Anti-Lock Brakes
Vehicle: 1995 Nissan Sentra 1.6 L4 GAS
Less Anti-Lock Brakes
Do not spill brake fluid on painted surfaces, it may cause damage to the paint. If brake fluid is spilled, wash immediately with water.
- Place container under master cylinder to avoid spillage, then fill master cylinder with brake fluid.
- Connect hose to bleeder valves, then depress brake pedal several times.
- With pressure applied to pedal open bleeder valve to release air trapped in system.
- Close bleeder, then release pedal slowly.
- Repeat steps 3 and 4 as outlined above until all air is removed from system.
- Bleed air from system in order as follows:
- Left rear whe...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan Sentra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Nissan Sentra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan Sentra cars and light trucks from 1990+.
Anti-lock Brakes -> Electrical Components Inspection -> Actuator Motor Relay -> Altima, NX 1600, NX 2000, Sentra & 200SX -> Maxima, 240SX & 300ZX -> Pathfinder & Pickup -> Quest -> Solenoid Valve Relay -> Wheel Sensors
Vehicle: 1995 Nissan Sentra XE 1.6 L4 GAS
Altima, NX 1600, NX 2000, Sentra & 200SX
Wheel Sensors
Check resistance between wheel sensor connector terminals, Fig. . Resistance should be 1.0-1.25 K-ohms.
Actuator Motor Relay
Check continuity between motor relay terminals as shown in Figs. and .
Solenoid Valve Relay
Check continuity between solenoid valve relay terminals as shown in Figs. and .
Maxima, 240SX & 300ZX
Refer to Fig. ...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan Sentra BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1995 Nissan Sentra vehicle.
|
| Access the Complete guide! |
