Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 Porsche 911 car and truck
repair procedures including Porsche engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1994 Porsche 911 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1994 Porsche 911
- 1994 Porsche 911 Carrera 4 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:B
- 1994 Porsche 911 Turbo Look 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:B
- 1994 Porsche 911 RS America 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:B
- 1994 Porsche 911 Carrera 2 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:B
- 1994 Porsche 911 Speedster 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:B
- 1994 Porsche 911 Targa 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:B
- 1994 Porsche 911 Turbo 3.6 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:C
BRAKE SERVICE PROCEDURES FOR 1994 Porsche 911 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Porsche 911 cars and light trucks from 1990+.
Disc Brakes -> Parking Brake Service -> 911 -> 928 -> 968 -> Adjustment
Vehicle: 1994 Porsche 911 Turbo 3.6 3.6 H6 GAS
Adjustment
911
- Raise and support vehicle.
- Remove rear wheels.
- Release brake cable tension at adjusting nuts behind disc splash shield.
- Insert screwdriver into adjustment opening in rear brake disc assembly.
- Rotate parking brake adjustment sprocket so that disc can no longer be rotated by hand.
- Repeat step 5 on opposite side.
- Adjust cable tension until slack is removed by rotating adjustment nuts behind brake disc splash shield.
- Remove tunnel cover and parking brake lever boot and check position of cable equalizer.
- Position the equalizer in the two inspection holes when lever is pull...
CLICK HERE TO GET FULL ACCESS TO 1994 Porsche 911 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Porsche 911 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Porsche 911 cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 968 -> Brake System Bleed -> Component Replacement -> Electronic Control Unit -> Hydraulic Unit
Vehicle: 1994 Porsche 911 Carrera 2 3.6 H6 GAS
Brake System Bleed
Refer to "Hydraulic Brake System" for bleeding procedure.
Component Replacement
These components are non-serviceable and must be replaced as a unit.
Hydraulic Unit
- Disconnect battery ground cable.
- Mark respective positions of wheel and wheel hub for reassembly, then remove right front wheel assembly.
- Remove wheel-arch inner panel.
- Disconnect all brake lines, numbers one through six from hydraulic unit.
- On all models, disconnect ground wire, then remove mounting bolts from hydraulic-unit holder.
- Move hydraulic unit and holder out slightly to gain access to strain re...
CLICK HERE TO GET FULL ACCESS TO 1994 Porsche 911 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Porsche 911 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Porsche 911 cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing
Vehicle: 1994 Porsche 911 Carrera 2 3.6 H6 GAS
The electrical control unit has a self-diagnosis testing facility. For this reason, it is not possible or necessary to check the control unit unless the check is carried out as part of an ABS test required for other reasons and only when this test is carried out with the Bosch K7-ETT 016.00/VAG 1516 test equipment.
After any work on the braking system which did not affect parts directly involved in the ABS, a function test check is required. The pi...
CLICK HERE TO GET FULL ACCESS TO 1994 Porsche 911 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Porsche 911 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Porsche 911 cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> 911 -> 911 Turbo -> 928 -> 968 -> Front Brake Pads, Replace -> Rear Brake Pads, Replace
Vehicle: 1994 Porsche 911 Speedster 3.6 H6 GAS
Front Brake Pads, Replace
911
- Raise and support vehicle.
- Using a pair of suitable pliers, remove brake pad pin retainers.
- Drive pad retaining pins out with a suitable drift and hammer.
- For pads that are still serviceable, mark their original positions for assembly reference.
- Remove the pads using tool P86, Fig. .
- Position pistons back in caliper using tool P83, Fig. . Brake fluid will be forced back into the reservoir. To prevent overflowing, siphon some fluid from reservoir.
- Clean brake pad contact surface in their slots in the caliper. Do not use mineral solvents or s...
CLICK HERE TO GET FULL ACCESS TO 1994 Porsche 911 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Porsche 911 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Porsche 911 cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> 911 -> 928 -> 968
Vehicle: 1994 Porsche 911 Carrera 4 3.6 H6 GAS
911
- Raise and support vehicle.
- Remove wheels and brake pads.
- Disconnect brake hydraulic line. Using a suitable device, depress and hold brake pedal to restrict flow of brake fluid from reservoir.
- Remove caliper retaining bolts, caliper, and metal shield.
- Loosen bleeder valve and carefully blow hydraulic fluid out of caliper. The recommended air pressure for fluid removal is 14 psi.
- Position the caliper in a soft jaw vise and remove the clamping ring and dust boot.
- Depress one caliper piston with tool P83 and position a wood block approximately 1/3 inches thick between the t...
CLICK HERE TO GET FULL ACCESS TO 1994 Porsche 911 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Porsche 911 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Porsche 911 cars and light trucks from 1990+.
Disc Brakes -> Parking Brake Service -> 911 -> 928 -> 968 -> Adjustment
Vehicle: 1994 Porsche 911 Targa 3.6 H6 GAS
Adjustment
911
- Raise and support vehicle.
- Remove rear wheels.
- Release brake cable tension at adjusting nuts behind disc splash shield.
- Insert screwdriver into adjustment opening in rear brake disc assembly.
- Rotate parking brake adjustment sprocket so that disc can no longer be rotated by hand.
- Repeat step 5 on opposite side.
- Adjust cable tension until slack is removed by rotating adjustment nuts behind brake disc splash shield.
- Remove tunnel cover and parking brake lever boot and check position of cable equalizer.
- Position the equalizer in the two inspection holes when lever is pull...
CLICK HERE TO GET FULL ACCESS TO 1994 Porsche 911 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1994 Porsche 911 vehicle.
|
| Access the Complete guide! |
