Auto Parts Search
We have info for following modifications of 1994 Dodge Intrepid
- 1994 Dodge Intrepid 3.3 V6 GAS, CID:201, Fuel Injection, Aspiration:201, Engine VIN:, Desg:T
- 1994 Dodge Intrepid 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:F
- 1994 Dodge Intrepid 3.3 V6 FLEX, CID:201, Fuel Injection, Aspiration:201, Engine VIN:, Desg:U
- 1994 Dodge Intrepid ES 3.3 V6 GAS, CID:201, Fuel Injection, Aspiration:201, Engine VIN:, Desg:T
- 1994 Dodge Intrepid ES 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:F
- 1994 Dodge Intrepid ES 3.3 V6 FLEX, CID:201, Fuel Injection, Aspiration:201, Engine VIN:, Desg:U
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Intrepid AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Intrepid cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1994 Dodge Intrepid ES 3.5 V6 GAS
- Raise and support vehicle.
- Remove wheel and tire assemblies.
- Remove brake caliper assembly.
- Remove brake rotor by pulling it straight off mounting studs.
- Remove speed sensor cable routing bracket from strut assembly.
- Remove stub axle and hub retaining nut.
- Insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal. Only pry inner joint from retaining snap ring. Do not attempt to remove inner tripod joint from transaxle stub shaft.
- Support steering knuc...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Intrepid DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Intrepid AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Intrepid cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1994 Dodge Intrepid 3.5 V6 GAS
- Raise and support vehicle.
- Remove wheel and tire assemblies.
- Remove brake caliper assembly.
- Remove brake rotor by pulling it straight off mounting studs.
- Remove speed sensor cable routing bracket from strut assembly.
- Remove stub axle and hub retaining nut.
- Insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal. Only pry inner joint from retaining snap ring. Do not attempt to remove inner tripod joint from transaxle stub shaft.
- Support steering knuc...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Intrepid DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Intrepid AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Intrepid cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1994 Dodge Intrepid ES 3.3 V6 FLEX
- Raise and support vehicle.
- Remove wheel and tire assemblies.
- Remove brake caliper assembly.
- Remove brake rotor by pulling it straight off mounting studs.
- Remove speed sensor cable routing bracket from strut assembly.
- Remove stub axle and hub retaining nut.
- Insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal. Only pry inner joint from retaining snap ring. Do not attempt to remove inner tripod joint from transaxle stub shaft.
- Support steering knuc...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Intrepid DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Intrepid AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Intrepid cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1994 Dodge Intrepid 3.3 V6 GAS
- Raise and support vehicle.
- Remove wheel and tire assemblies.
- Remove brake caliper assembly.
- Remove brake rotor by pulling it straight off mounting studs.
- Remove speed sensor cable routing bracket from strut assembly.
- Remove stub axle and hub retaining nut.
- Insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal. Only pry inner joint from retaining snap ring. Do not attempt to remove inner tripod joint from transaxle stub shaft.
- Support steering knuc...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Intrepid DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Intrepid AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Intrepid cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1994 Dodge Intrepid ES 3.3 V6 GAS
- Raise and support vehicle.
- Remove wheel and tire assemblies.
- Remove brake caliper assembly.
- Remove brake rotor by pulling it straight off mounting studs.
- Remove speed sensor cable routing bracket from strut assembly.
- Remove stub axle and hub retaining nut.
- Insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal. Only pry inner joint from retaining snap ring. Do not attempt to remove inner tripod joint from transaxle stub shaft.
- Support steering knuc...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Intrepid DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge Intrepid AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge Intrepid cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1994 Dodge Intrepid 3.3 V6 FLEX
- Raise and support vehicle.
- Remove wheel and tire assemblies.
- Remove brake caliper assembly.
- Remove brake rotor by pulling it straight off mounting studs.
- Remove speed sensor cable routing bracket from strut assembly.
- Remove stub axle and hub retaining nut.
- Insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal. Only pry inner joint from retaining snap ring. Do not attempt to remove inner tripod joint from transaxle stub shaft.
- Support steering knuc...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge Intrepid DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1994 Dodge Intrepid vehicle. |
Access the Complete guide! |