Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

1993 Toyota Pickup CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Toyota REPAIR SHOPS DON'T WANT YOU TO KNOW

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

Help me findSearch

Select Section

Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Toyota Pickup car and truck repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your Toyota Pickup automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >
Using the Automotix DIY repair procedures will save you hundreds and even thousands of dollars! In addition, it will save you hours of touring the city searching for Toyota mechanics you can trust. The Automotix DIY solution is particularly affordable. A full access to the entire DIY repair procedures and diagrams for your 1993 Toyota Pickup vehicle will cost less than a single gallon of gas. Here are some of the DIY repair tips and procedures you will find here:

A/C & HEATER SERVICE PROCEDURES FOR 1993 Toyota Pickup AUTOMOBILES

Imported Cars & Light Trucks & Vans -> 1993-95 -> Evacuating System -> Using Charging Station -> With Vacuum Pump
Vehicle: 1993 Toyota Pickup RN02 2.4 L4 GAS

With Vacuum Pump

Vacuum pumps suitable for removing air and moisture from A/C systems are commercially available. A specification for system pump down used here is 28-291/2 inches vacuum. This reading can be attained at or near sea level only. For each 1000 feet of altitude this operation is performed, the reading will be 1 inch vacuum higher. For example, at 5000 feet elevation, only 23-241/2 inches of vacuum can be obtained. The system refrigerant must be completely recovered before it can be evacuated. Damage to the vacuum pump will result if pressurized refrige...

CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup A/C & HEATER SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1993 Toyota Pickup AUTOMOBILES

DISC BRAKES -> Front Disc Brakes -> BRAKE PAD SERVICE -> 1996 4Runner -> Avalon, Camry, Corolla & Celica -> Disc, Replace -> Land Cruiser, 4WD Pickup, 4WD Tacoma, 1993-95 4Runner & T100 -> Paseo -> Pickup & 1993-95 4Runner w/FS17 & F18 Type Disc, 2WD -> Pickup & 1993-95 4Runner w/PD60 & PD66 Type Disc & T100, 2WD -> Previa & Supra -> RAV4 -> Tacoma, 2WD -> Tercel
Vehicle: 1993 Toyota Pickup RN02 2.4 L4 GAS

Tercel

  • Raise and support front of vehicle, then remove wheel and tire assembly.
  • Remove two caliper mounting bolts, then remove caliper. Do not allow caliper to hang by brake hose.
  • Remove inner pad, then remove outer pad and anti-squeal shim(s), Fig. .
  • Remove anti-rattle spring and pad guide plate.
  • Remove pad support plate and anti-squeal shim(s).
  • Reverse procedure to install.

Paseo

  • Raise and support vehicle, then remove wheel and tire assembly.
  • Reinstall two wheel lug nuts to retain disc.
  • Remove two attaching bolts and the caliper from torque plate, Fig. , then suspend from ...

CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup BRAKE SERVICE PROCEDURES

FUEL FILTER REPLACEMENT PROCEDURES FOR 1993 Toyota Pickup AUTOMOBILES

Toyota -> Fuel Filter Replacement -> Land Cruiser, Pickup, Previa, Sequoia, Tacoma, Tundra, T100, Truck & Van -> Fuel System Pressure Relief -> Models Less Union Bolt Fuel Line Connection -> Models w/Union Bolt Fuel Line Connection -> Removal & Installation
Vehicle: 1993 Toyota Pickup DLX 2.4 L4 GAS

Fuel System Pressure Relief

Models w/Union Bolt Fuel Line Connection
  • Obtain the vehicle owners radio theft protection code prior to disconnecting the battery ground cable, if equipped.
  • Disconnect the battery ground cable.
  • Remove the fuel fill cap to release fuel tank pressure.
  • Place a shop towel over the union bolt at top of fuel filter. Slowly loosen the union bolt allowing fuel pressure to bleed down.
  • Whenever the union bolt is loosened to relieve fuel system pressure, always replace the bolt gasket.
Models Less Union Bolt Fuel...

CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup FUEL FILTER REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Toyota Pickup AUTOMOBILES

CV AXLE SHAFT, Replace
Vehicle: 1993 Toyota Pickup 3.0 V6 GAS

  • Raise and support vehicle, then remove front wheels as necessary and front fender apron seal.
  • Remove cotter pin, locknut cap and locknut from axle spline
  • Drain transmission fluid, then using a suitable puller, disconnect tie rod end from steering knuckle.
  • Disconnect stabilizer bar link from lower control arm.
  • Disconnect ball joint from steering knuckle.
  • On models with constant velocity type inner joints, using paint or chalk, place match marks on driveshaft inner joint and side gear shaft or center driveshaft, then proceed as follows:
    • Have an assistant apply brakes to prevent a...

CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1993 Toyota Pickup AUTOMOBILES

Alternator, Replace
Vehicle: 1993 Toyota Pickup 2.4 L4 GAS

  • Disconnect battery ground cable from negative terminal of battery.
  • On models with power steering, drain coolant into a suitable container.
  • On all models, loosen alternator pivot and remove adjusting bolt.
  • Remove drive belt.
  • On models with power steering, remove engine under cover.
  • Remove water inlet hose.
  • On models with air c...

CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup STARTER & ALTERNATOR REPLACEMENT PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Toyota Pickup AUTOMOBILES

Toyota -> Automatic Transmission Oil Temperature Warning Lamp ->
Vehicle: 1993 Toyota Pickup 3.0 V6 GAS

This lamp will be illuminated when automatic transmission or transfer case fluid temperature exceeds 302°F. If the lamp lights, allow vehicle to operate at idle speed until fluid temperature falls below 248°F; t...

CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup MAINTENANCE LAMP RESET PROCEDURES

RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1993 Toyota Pickup AUTOMOBILES

Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 1993 Toyota Pickup 3.0 V6 GAS

Inlet

  • Disconnect battery ground cable.
  • Drain cooling system into a suitable container by loosening drain plug of radiator.
  • Reposition hose clamp at heater core.
  • Remove hose from heater core.
  • Reposition hose clamp at water outlet.
  • Remove hose from water outlet.
  • Remove hose from vehicle.
  • Reverse procedure ...

CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup RADIATOR & HOSE REPLACEMENT PROCEDURES

SERPENTINE BELT SERVICE PROCEDURES FOR 1993 Toyota Pickup AUTOMOBILES

Serpentine Drive Belt, Replace
Vehicle: 1993 Toyota Pickup DLX 2.4 L4 GAS

  • Raise and support vehicle.
  • Remove right front wheel.
  • Remove bolts from righthand fender apron seal, then remove apron seal.
  • Remove nuts from engine cover subassembly, then remove engine cover.
  • Remove bolts from engine control rod with bracket.
  • Remove righthand bolt from engine mounting stay.
  • Remove righthand bolts from engine mounting bracket.
  • Rotate or lift bel...

CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup SERPENTINE BELT SERVICE PROCEDURES

COMPONENT LOCATION DIAGRAMS FOR 1993 Toyota Pickup AUTOMOBILES

Component location diagrams for most 1993 Toyota Pickup cars and light trucks sold in the U.S. from 1990+.

Connector Locations (Body) Diagram for 1993 Toyota Pickup RN02 2.4 L4 GASConnector Locations (Body) Diagram for 1993 Toyota Pickup RN02 2.4 L4 GAS

Components on diagram:
  • Connector A-17
  • Connector D-13
  • Connector D-14
  • Connector D-15
  • Connector D-16
  • Connector Locations (Engine Compartment) Diagram for 1993 Toyota Pickup  2.4 L4 GASConnector Locations (Engine Compartment) Diagram for 1993 Toyota Pickup 2.4 L4 GAS

    Components on diagram:
  • Connector C-1
  • Connector C-2
  • Connector C-3
  • Connector C-4
  • Connector T-2
  • CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup PARTS/COMPONENTS LOCATION DIAGRAMS!

    WIRING DIAGRAMS FOR 1993 Toyota Pickup AUTOMOBILES

    OEM drawn wiring diagrams for most 1993 Toyota Pickup cars and light trucks sold in the U.S.

    1993 Toyota Pickup  3.0 V6 GAS Wiring Diagram1993 Toyota Pickup 3.0 V6 GAS Wiring Diagram

    Components on diagram:
  • Anti Lock ECU
  • Anti Lock Relay
  • Anti Lock Speed Sensor
  • Anti Lock Deceleration Sensor
  • Rear Anti Lock Warning Light
  • 1993 Toyota Pickup DLX 3.0 V6 GAS Wiring Diagram1993 Toyota Pickup DLX 3.0 V6 GAS Wiring Diagram

    Components on diagram:
  • Throttle Position Sensor
  • Brake Fluid Level Switch
  • Alternator
  • Wiper Motor
  • Starter
  • CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup WIRING DIAGRAMS!

    TECHNICAL SERVICE BULLETINS FOR 1993 Toyota Pickup AUTOMOBILES

    OEM TSB listings for most 1993 Toyota Pickup cars and light trucks sold in the U.S. from 1985+.

    Document: REPLACEMENT CERTIFICATION LABELS - REVISED
    Vehicle: 1993 Toyota Pickup 3.0 V6 GAS

    Auto Systems:
  • Identification, Models, Labels, Etc.
  • Document: PERMANENT-TYPE PROTECTIVE WAX COATINGS
    Vehicle: 1993 Toyota Pickup 3.0 V6 GAS

    Auto Systems:
  • Finishes, Body Structure, Frame, Bumpers
  • CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup TECHNICAL SERVICE BULLETINS!

    COMPONENT/PARTS SPECIFICATIONS FOR 1993 Toyota Pickup AUTOMOBILES

    BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1993 Toyota Pickup cars and light trucks sold in the U.S. and Canada from 1970+.

    • Brake caliper mounting bolt torque
    • Brake drum runout, machining, & discard specs
    • Minimum brake lining thickness.
    • Brake rotor runout, parallelism, machining, discard, & finish specs

    A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1993 Toyota Pickup cars and light trucks sold in the U.S. and Canada from 1980+.

    • Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap

    COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.

    PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules

    QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1993 Toyota Pickup cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.

    • Automatic transmission/transaxles capacities, lubricant recommendations
    • Differential/final drive capacities, lube recommendations, grades, & viscosities
    • Final drive fill & drain plug torques
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
    • Severe service maintenance & interval recommendations
    • Tire sizes, wheel nut/bolt torque, pressures & rim sizes
    • Transfer case capacities, lube recommendations, grades, & viscosities

    TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1993 Toyota Pickup cars and light trucks sold in the U.S. and Canada from 1980+

    • Airflow sensor electrical specifications
    • Tensioning specifications for systems with automatic tensioners
    • Barometric pressure sensor specs
    • Battery group number and cranking performance
    • Crankshaft & camshaft position sensor resistance
    • Engine compression pressures
    • Coolant temperature sensor specs
    • Computer advance.
    • Diesel fuel temperature sensor resistance.
    • Distributor advance specifications
    • Ignition pickup coil resistance
    • Exhaust gas recirculation temperature sensor resistance
    • Engine fastener torque values
    • Firing order diagrams
    • Fuel system pressures
    • Generator (alternator) specs
    • Intake air temperature sensor specs
    • Ignition coil specifications
    • Fuel injector resistance
    • Engine idle speeds
    • Knock sensor resistance
    • Manifold absolute pressure sensor specs
    • Mixture control solenoid resistance
    • Voltage regulator specs
    • Spark plug applications & gaps
    • Starter motor electrical specs.
    • Tensioning specifications for systems without automatic tensioners
    • Throttle body temperature sensor resistance
    • Ignition timing in degrees at rpm
    • Transmission oil temperature sensor resistance
    • Throttle position sensor specs
    • Vacuum sensor valve specs

    CLICK HERE TO GET FULL ACCESS TO 1993 Toyota Pickup SPECIFICATIONS DATA!

    Shop online for auto body parts, engines, wheels, lights...

    Click here to view more details about 1988 Toyota Pickup Bumper End, Front, Passenger Side1988 Toyota Pickup Bumper End, Front, Passenger Side, A high quality, OE replacement bumper end; Backed by 1-year, unlimited-mileage warranty..

    Source: Auto Body Parts Store

    $8.85

    Click here to view more details about 1987 Toyota Pickup Turn Signal Assembly, Passenger Side1987 Toyota Pickup Turn Signal Assembly, Passenger Side, A High Quality, Direct Fit OE Replacement For Turn Signal Assembly.

    Source: Auto Body Parts Store

    $28.14

    Click here to view more details about 2011 Toyota Camry Full Door Mirror Covers2011 Toyota Camry Full Door Mirror Covers, Full Door Mirror Covers; 2 Piece Set, , .

    Source: Wheels / Rims, Mirrors & Lights Store

    $46.50

    Click here to view more details1995 Toyota Pickup L4, 2.4 L, 2366 CC Rebuilt Engine, OHC, RWD, Fuel injected or Carb. Fits 8/84-10/95, Warranty: 3-Year/100,000 Mile, .

    Source: Rebuilt Engines Store

    $1,469.00

    Click here to view more details1989 Toyota Pickup Used Parking Lamp, Driver Side, PARKLAMP/TURN SIGNAL; BUMPER-MTD, Very Good.

    Source: Used Auto Parts Store

    $45.00

    Click here to view more details1992 Toyota Pickup Used Parking Lamp, Driver Side, L, Parklamp/Turn Signal; fender-mtd, 4x2, painted, std, Good.

    Source: Used Auto Parts Store

    $56.00
    More parts
    Help me findSearch
    Auto Repair Quick Search
    Help me find
    Search DIY repair manuals by VIN...
    Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

    Find out what info we have for your vehicle

    Get the Complete Technical Service Bulletins!
    Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1993 Toyota Pickup vehicle.
    Access the Complete guide!
    Need To Fix Your Car or Truck?
    Save Money With Free Car Insurance Quote
    FREE car insurance quote
    Enter Zip Code:
    Auto Repair Quick Search
    Help me find