Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Mazda MX-3 car and truck
repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Mazda MX-3 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Mazda MX-3
- 1993 Mazda MX-3 1.6 L4 GAS, CC:1597, Fuel Injection
- 1993 Mazda MX-3 1.8 V6 GAS, CC:1845, Fuel Injection
- 1993 Mazda MX-3 GS 1.8 V6 GAS, CC:1845, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1993 Mazda MX-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mazda MX-3 cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS -> DESCRIPTION
Vehicle: 1993 Mazda MX-3 1.8 V6 GAS
When the brake pedal is depressed, a vacuum builds up in the booster which amplifies the pedal force, pressing on the piston in the master cylinder. The piston raises the hydraulic pressure in the cylinder. This hydraulic pressure i...
CLICK HERE TO GET FULL ACCESS TO 1993 Mazda MX-3 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Mazda MX-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mazda MX-3 cars and light trucks from 1990+.
Anti-lock Brakes -> Troubleshooting -> 1994-96 Pickups -> 1995-96 -> 1995-96 Miata -> Millenia -> MPV & 1993 Pickups -> MX-3 -> MX-6 & 626 -> Navajo -> Protege
Vehicle: 1993 Mazda MX-3 GS 1.8 V6 GAS
1995-96 Miata
Refer to Fig. for troubleshooting flowchart.
Millenia
Refer to Fig. for troubleshooting flowchart.
MPV & 1993 Pickups
Refer to Fig. and for troubleshooting flow chart.
MX-3
Refer to Fig. for troubleshooting flowchart.
MX-6 & 6...
CLICK HERE TO GET FULL ACCESS TO 1993 Mazda MX-3 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Mazda MX-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mazda MX-3 cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS -> DESCRIPTION
Vehicle: 1993 Mazda MX-3 1.6 L4 GAS
When the brake pedal is depressed, a vacuum builds up in the booster which amplifies the pedal force, pressing on the piston in the master cylinder. The piston raises the hydraulic pressure in the cylinder. This hydraulic pressure i...
CLICK HERE TO GET FULL ACCESS TO 1993 Mazda MX-3 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Mazda MX-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mazda MX-3 cars and light trucks from 1990+.
DISC BRAKES -> BRAKE PAD SERVICE -> 1993 -> 1994-96 -> 929 -> Front -> Installation -> Miata -> Miata & MX-3 -> Millenia -> MPV & 929 -> MX-3 -> MX-6 & 626 -> Navajo -> Pickups -> Protege & 323 -> Rear -> Removal -> RX-7
Vehicle: 1993 Mazda MX-3 1.6 L4 GAS
Front
Miata
- Raise and support front of vehicle, then remove front wheels.
- Remove parts in order as shown in Fig. , noting the following:
- After removing lower lock bolt, rotate caliper upward and support with rope.
- Reverse procedure to install, noting the following.
- Push the piston inward using piston pushing tool No. 490221600C, or equivalent, then install new pads.
Millenia
Brake pads should be replaced as a set if lining thickness is below .08 inch on any pad.
- Raise and support vehicle, then remove wheel and caliper lower mounting bolt.
- Pivot caliper upward off rotor, Figs. and . Do ...
CLICK HERE TO GET FULL ACCESS TO 1993 Mazda MX-3 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Mazda MX-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mazda MX-3 cars and light trucks from 1990+.
POWER BRAKE UNITS -> TROUBLESHOOTING -> Check Valve -> Function Check -> Load Test
Vehicle: 1993 Mazda MX-3 1.6 L4 GAS
Function Check
- Stop engine and depress brake pedal a few times to relieve vacuum.
- With pedal depressed, start engine. After starting engine, pedal should move down slightly. If so, unit is functioning.
- After engine has run two minutes, turn it off. Depress pedal with normal force.
- If the first pedal stroke is long and gets shorter with subsequent strokes, the unit is operating. If a problem is found, inspect check valve, vacuum hose and installation. Repair if necessary and check again.
- Start engine and depress pedal with usual force.
- Stop engine with pedal still depressed. Hold pedal...
CLICK HERE TO GET FULL ACCESS TO 1993 Mazda MX-3 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Mazda MX-3 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Mazda MX-3 cars and light trucks from 1990+.
Mazda -> DRUM BRAKES -> BRAKE SERVICE
Vehicle: 1993 Mazda MX-3 GS 1.8 V6 GAS
For brake drum and brake shoe replacement procedures, r...
CLICK HERE TO GET FULL ACCESS TO 1993 Mazda MX-3 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1993 Mazda MX-3 vehicle.
|
| Access the Complete guide! |
