Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Hyundai Elantra car and truck
repair procedures including Hyundai engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Hyundai Elantra automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Hyundai Elantra
- 1993 Hyundai Elantra 1.6 L4 GAS, CC:1596, Fuel Injection, Engine VIN:, Desg:R
- 1993 Hyundai Elantra 1.8 L4 GAS, CC:1836, Fuel Injection, Engine VIN:, Desg:M
- 1993 Hyundai Elantra GL 1.6 L4 GAS, CC:1596, Fuel Injection, Engine VIN:, Desg:R
- 1993 Hyundai Elantra GL 1.8 L4 GAS, CC:1836, Fuel Injection, Engine VIN:, Desg:M
- 1993 Hyundai Elantra GLS 1.8 L4 GAS, CC:1836, Fuel Injection, Engine VIN:, Desg:M
BRAKE SERVICE PROCEDURES FOR 1993 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Hyundai Elantra cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Accent, Excel & Scoupe -> Assemble -> Disassemble -> Elantra & Sonata -> Front -> Installation -> Rear -> Removal
Vehicle: 1993 Hyundai Elantra 1.8 L4 GAS
Accent, Excel & Scoupe
Removal
- Remove brake pads as outlined previously.
- Disconnect and cap brake line(s).
- Remove caliper attaching bolts and caliper assembly from steering knuckle.
Disassemble
- Remove sleeve, sleeve boot and pin boots, Fig. .
- Protect fingers with shop towel, then blow piston from caliper bore with compressed air.
- Remove piston boot, then pry piston seal from caliper bore using a suitable screwdriver.
Assemble
- Clean all components with suitable cleaner.
- Inspect caliper bore, piston and carrier for damage or excessive wear.
- Apply rubber grease to new piston seal, then ...
CLICK HERE TO GET FULL ACCESS TO 1993 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Hyundai Elantra cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Accent, Elantra, Excel & Sonata -> Inspection -> Installation -> Removal -> Scoupe
Vehicle: 1993 Hyundai Elantra GL 1.8 L4 GAS
Scoupe
Removal
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove brake drum, then automatic adjuster spring and lever.
- Remove shoe-to-shoe spring and hold-down spring, Fig. .
- Remove parking brake cable from parking brake lever.
- Remove clip from parking brake cable at backing plate, then brake line from wheel cylinder.
- Remove wheel cylinder assembly with backing plate.
Inspection
- Check backing plate for wear or damage. Replace as necessary.
- Check wheel cylinder for fluid leakage. Repair or replace cylinder as necessary.
- Inspect brake lining and drum for proper contact...
CLICK HERE TO GET FULL ACCESS TO 1993 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Hyundai Elantra cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed
Vehicle: 1993 Hyundai Elantra GL 1.8 L4 GAS
- Fill master cylinder reservoir with brake fluid.
- Using a suitable length and diameter of vinyl hose, insert end of hose into a container full of brake fluid.
- Secure other end of hose to wheel cylinder bleeder plug farthest from master cylinder.
- An assistant should depress brake ped...
CLICK HERE TO GET FULL ACCESS TO 1993 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Hyundai Elantra cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> 1993 Elantra & 1993-94 Sonata -> 1994-96 Elantra & 1995-96 Sonata -> Accent, Excel & Scoupe -> Elantra & Sonata -> Front -> Rear
Vehicle: 1993 Hyundai Elantra 1.8 L4 GAS
Accent, Excel & Scoupe
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove lower bolt and caliper assembly, Fig. . Position assembly aside using suitable wire.
- Remove brake pads and shim.
- Bottom piston in caliper using suitable tool.
- Install new brake pads and attach shim to the outer pad. Tighten lower bolt to specifications.
Elantra & Sonata
Front
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove two attaching bolts from torque plate, Fig. .
- Remove brake cylinder, then position aside using suitable wire.
- Remove brake pads.
- Install pads clips, then ...
CLICK HERE TO GET FULL ACCESS TO 1993 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Hyundai Elantra cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> Parking Brake
Vehicle: 1993 Hyundai Elantra GL 1.6 L4 GAS
Parking Brake
Service brakes must be properly adjusted before attempting to adjust parking brake lever.
- Pull parking brake lever upward with a force of approximately 44 lbs., noting the following:
- On Accent, Excel & Scoupe models, a ...
CLICK HERE TO GET FULL ACCESS TO 1993 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Hyundai Elantra cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting -> Check Valve Operation
Vehicle: 1993 Hyundai Elantra 1.6 L4 GAS
Check Valve Operation
- Remove booster hose from check valve.
- Start engi...
CLICK HERE TO GET FULL ACCESS TO 1993 Hyundai Elantra BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1993 Hyundai Elantra vehicle.
|
| Access the Complete guide! |
