Auto Parts Search
BRAKE SERVICE PROCEDURES FOR 1992 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Lexus ES300 cars and light trucks from 1990+.
DISC BRAKES -> Front Disc Brakes -> BRAKE PADS REPLACEMENT -> ES 250 -> EXCEPT ES 250
Vehicle: 1992 Lexus ES300 3.0 V6 GAS
EXCEPT ES 250
Refer to Figs. through when replacing brake pads.
- Remove wheel.
- Remove the bottom caliper bolt, and turn caliper up as in Fig. .
- Remove following parts:
- Two anti-squeal springs.
- Two brake pads.
- Four anti-squeal shims.
- Two pad wear indicators.
- Four pad support plates.
- On models with four piston calipers, install new pad support plates.
- On all models, install pads as follows:
- Install wear indicators on pads.
- Apply disc brake grease to both anti-squeal shim. Then install shims on each pad.
- Install pads with wear indicators facing downward.
- Install anti-squeal sp...
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Lexus ES300 cars and light trucks from 1990+.
LEXUS, HYDRAULIC BRAKES -> PROPORTIONING VALVE -> FLUID PRESSURE TEST -> LS 400 -> REPLACEMENT -> SC 300, SC 400 & LS 400
Vehicle: 1992 Lexus ES300 3.0 V6 GAS
FLUID PRESSURE TEST
SC 300, SC 400 & LS 400
Refer to Fig. for the following test.
- Install LSPV gauge 09709-29017, or equivalent and bleed out air.
- Raise master cylinder pressure and check pressure at rear wheel cylinders, compare to chart in Figs. and . If pressure is in...
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Lexus ES300 cars and light trucks from 1990+.
DISC BRAKES -> Rear Disc Brakes & Parking Brakes -> CALIPER REPLACEMENT -> ES 250 & ES 300 -> LS 400, SC300 & SC 400
Vehicle: 1992 Lexus ES300 3.0 V6 GAS
ES 250 & ES 300
- Remove union bolt and disconnect brake hose from caliper.
- Remove caliper bolts and caliper from torque plate.
- Remove brake pads as previously described.
- Reverse procedure to install, noting the following:
- Torque caliper bolts to 14 ft. lbs.
- Torque union bolt to 22 ft. lbs. on ES 250 models or 14 ft. lbs. on ES 300 models.
- Fill reservoir, bleed brakes and check for leaks.
LS 400, SC300 & SC 400
- Using brake hose wrench 0975...
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Lexus ES300 cars and light trucks from 1990+.
LEXUS, POWER BRAKE UNITS -> BRAKE PEDAL FREEPLAY ADJUSTMENT -> ES 250 -> ES 300, SC 300, SC 400 & LS 400
Vehicle: 1992 Lexus ES300 3.0 V6 GAS
ES 250
- Stop engine and depress brake pedal several times to reduce vacuum in the booster.
- Push pedal until resistance is felt. Measure distance, Fig. .
- If pedal freeplay is not .12-.24 inch, adjust pedal freeplay as follows:
- Adjust pedal freeplay by turning the pedal pushrod.
- Start engine and confirm that pedal freeplay exists.
- After adjusting pedal freeplay, check pedal height as outlined under "Brake Pedal Height,... "
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Lexus ES300 cars and light trucks from 1990+.
LEXUS, POWER BRAKE UNITS -> BRAKE PEDAL HEIGHT ADJUSTMENT
Vehicle: 1992 Lexus ES300 3.0 V6 GAS
- Measure brake pedal height, Fig. .
- If pedal height is not 6.988-7.382 inch on ES 250, 5.81-6.20 on ES 300, 5.92-6.31 inch on SC 300 and SC 400 or 5.62-6.02 inch on LS 400 models, adjust pedal height as follows:
- Remove the undercover and lower dash finish panel as outlined under "Instrument Panel, Replace" in "Dash Panel Service".
- Disconnect stop lamp switch.
- Loosen stop light switch locknut, then back out switc...
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus ES300 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Lexus ES300 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Lexus ES300 cars and light trucks from 1990+.
LEXUS, POWER BRAKE UNITS -> OPERATION
Vehicle: 1992 Lexus ES300 3.0 V6 GAS
When the brake pedal is depressed, a vacuum builds up in the booster which amplifies the pedal force, pressing on the piston in the master cylinder. The piston raises the hydraulic pressure in the cylinder. This hydr...
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus ES300 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1992 Lexus ES300 vehicle. |
Access the Complete guide! |