Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Mazda 626 car and truck
repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Mazda 626 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Mazda 626
- 1991 Mazda 626 2.2 L4 GAS, CC:2184, Fuel Injection
- 1991 Mazda 626 2.2 L4 GAS, CC:2184, Fuel Injection
- 1991 Mazda 626 DX 2.2 L4 GAS, CC:2184, Fuel Injection
- 1991 Mazda 626 GT 2.2 L4 GAS, CC:2184, Fuel Injection
- 1991 Mazda 626 LX 2.2 L4 GAS, CC:2184, Fuel Injection
- 1991 Mazda 626 LE 2.2 L4 GAS, CC:2184, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1991 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Mazda 626 cars and light trucks from 1990+.
HYDRAULIC BRAKES -> INSPECTION -> MASTER CYLINDER BORE DIMENSIONS
Vehicle: 1991 Mazda 626 GT 2.2 L4 GAS
MASTER CYLINDER BORE DIMENSIONS
All Mazda vehicles except MPV, RX-7 Turbo, Navajo and MX-3 with DOHC engine are equipped with master cylinders that have a.875 inch bore diameter. MPV and RX-7 Turbo use the same type of master cylinder, except the ...
CLICK HERE TO GET FULL ACCESS TO 1991 Mazda 626 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Mazda 626 cars and light trucks from 1990+.
Anti-Lock Brakes -> COMPONENT REPLACEMENT -> 1990-91 MX-6 & 626 -> 1992 MX-6 & 626 -> 929 -> COMPUTER MODULE -> CONTROL UNIT -> FRONT SENSOR ROTOR -> FRONT WHEEL SPEED SENSOR -> FRONT WHEEL SPEED SENSOR & ROTOR -> HYDRAULIC UNIT -> Miata -> MPV, B2200 & B2600i -> MX-3 -> MX-6 & 626 -> Navajo -> REAR ANTI-LOCK BRAKE SYSTEM (RABS) SENSOR -> REAR ANTI-LOCK BRAKE SYSTEM (RABS) VALVE -> REAR SENSOR ROTOR -> REAR WHEEL SPEED SENSOR -> REAR WHEEL SPEED SENSOR & ROTOR -> RX-7
Vehicle: 1991 Mazda 626 2.2 L4 GAS
HYDRAULIC UNIT
1990-91 MX-6 & 626
The accumulator contains high pressure gas. Do not attempt to disassemble or subject it to hard shocks or high heat.
When the hydraulic unit is scrapped, the high pressure gas must be released. Turn the screw on the bottom of the accumulator one full turn only, allowing gas to escape gradually.
- Disconnect battery ground cable.
- Remove igniter and fuel filter to bracket mounting bolts, then move filter and igniter toward engine.
- Remove air cleaner assembly, then the brake fluid level sensor connector.
- Remove brake pipe from master cylinder, then th...
CLICK HERE TO GET FULL ACCESS TO 1991 Mazda 626 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Mazda 626 cars and light trucks from 1990+.
DRUM BRAKES -> TIGHTENING SPECIFICATIONS
Vehicle: 1991 Mazda 626 GT 2.2 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1991 Mazda 626 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Mazda 626 cars and light trucks from 1990+.
DISC BRAKES -> PARKING BRAKE SERVICE -> 929 -> ADJUSTMENT -> EXCEPT RX-7 & 929 -> REPLACEMENT -> RX-7
Vehicle: 1991 Mazda 626 GT 2.2 L4 GAS
REPLACEMENT
929
- Raise and support vehicle and remove rear wheel assembly.
- Remove caliper attaching bolts, then the caliper, leaving brake hose attached, and position caliper out of way.
- Remove disc plate attaching screws and the disc plate, Fig. . If disc plate is difficult to remove, remove dust cap, insert screwdriver into hole and turn adjuster to increase shoe clearance.
- Remove upper and lower return springs, then the front and rear hold pins.
- Remove brake shoes, then separate adjuster and operating lever assembly from shoes.
- Check inside of disc plate for scratching and une...
CLICK HERE TO GET FULL ACCESS TO 1991 Mazda 626 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Mazda 626 cars and light trucks from 1990+.
Anti-Lock Brakes -> COMPONENT REPLACEMENT -> 1990-91 MX-6 & 626 -> 1992 MX-6 & 626 -> 929 -> COMPUTER MODULE -> CONTROL UNIT -> FRONT SENSOR ROTOR -> FRONT WHEEL SPEED SENSOR -> FRONT WHEEL SPEED SENSOR & ROTOR -> HYDRAULIC UNIT -> Miata -> MPV, B2200 & B2600i -> MX-3 -> MX-6 & 626 -> Navajo -> REAR ANTI-LOCK BRAKE SYSTEM (RABS) SENSOR -> REAR ANTI-LOCK BRAKE SYSTEM (RABS) VALVE -> REAR SENSOR ROTOR -> REAR WHEEL SPEED SENSOR -> REAR WHEEL SPEED SENSOR & ROTOR -> RX-7
Vehicle: 1991 Mazda 626 DX 2.2 L4 GAS
HYDRAULIC UNIT
1990-91 MX-6 & 626
The accumulator contains high pressure gas. Do not attempt to disassemble or subject it to hard shocks or high heat.
When the hydraulic unit is scrapped, the high pressure gas must be released. Turn the screw on the bottom of the accumulator one full turn only, allowing gas to escape gradually.
- Disconnect battery ground cable.
- Remove igniter and fuel filter to bracket mounting bolts, then move filter and igniter toward engine.
- Remove air cleaner assembly, then the brake fluid level sensor connector.
- Remove brake pipe from master cylinder, then th...
CLICK HERE TO GET FULL ACCESS TO 1991 Mazda 626 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Mazda 626 cars and light trucks from 1990+.
POWER BRAKE UNITS -> POWER BRAKE UNIT SERVICE -> OVERHAUL -> REPLACE
Vehicle: 1991 Mazda 626 2.2 L4 GAS
REPLACE
- Remove master cylinder as described in "Hydraulic Brake".
- Remove clutch pipe holder, if equipped, then disconnect vacuum hose from power brake unit.
- Disconnect pushrod fork from brake pedal and remove power brake unit from vehicle.
- Reverse procedure to install. On all models except Navajo, booster bolts are torqued to 14-17 ft.lbs. On Navajo models, booster bolts ore torqued to 13-25 ft.lbs.
OVERHAUL
Refer...
CLICK HERE TO GET FULL ACCESS TO 1991 Mazda 626 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Mazda 626 vehicle.
|
| Access the Complete guide! |
