Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Dodge RAM 50 car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Dodge RAM 50 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Dodge RAM 50
- 1991 Dodge RAM 50 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:S
- 1991 Dodge RAM 50 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:W
- 1991 Dodge RAM 50 SE 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:S
- 1991 Dodge RAM 50 SE 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:W
MAINTENANCE LAMP RESET PROCEDURES FOR 1991 Dodge RAM 50 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1991 Dodge RAM 50 cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Emission Maintenance Reminder Indicator -> Chrysler, Dodge & Plymouth
Vehicle: 1991 Dodge RAM 50 SE 2.4 L4 GAS
This Emission Maintenance Reminder System (Maintenance Required Lamp) is incorporated into the engine controller. The controller stores vehicle mileage into its memory every eight miles, then at 60,000, 82,500 or 120,000 miles it will light the EMR (Maintenance Required) lamp. When the indicated mileage is reached or the EMR lamp is on at all times, the following components must be replaced and the EMR lamp reset:
- At 60,00 miles, proceed as follows:
- Replace EGR valve.
- Clean EGR passage.
- Replace PCV valve.
- At 82,500 miles, replace oxygen sensor.
- At 120,000 miles, proceed as ...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge RAM 50 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1991 Dodge RAM 50 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1991 Dodge RAM 50 cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Air Bag Indicator Lamp ->
Vehicle: 1991 Dodge RAM 50 SE 3.0 V6 GAS
The air bag indicator lamp lights for 6-8 seconds each time the ignition is turned On. The lamp indicates a system self-test is being performed by the air bag co...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge RAM 50 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1991 Dodge RAM 50 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1991 Dodge RAM 50 cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Service 4WD System Warning Lamp ->
Vehicle: 1991 Dodge RAM 50 2.4 L4 GAS
This lamp should light for a approximately 2 seconds when the ignition is turned On as a bulb check. If the warning lamp...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge RAM 50 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1991 Dodge RAM 50 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1991 Dodge RAM 50 cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Check Gauge Warning Lamp ->
Vehicle: 1991 Dodge RAM 50 2.4 L4 GAS
When the ignition is turned On, the lamp will light for approximately 2 seconds as a bulb inspection. The PCM continually monitors the engine oil pressure, engine coolant temperature and electrical system voltage. The check gauges lamp w...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge RAM 50 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1991 Dodge RAM 50 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1991 Dodge RAM 50 cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Electronic Throttle Control Indicator ->
Vehicle: 1991 Dodge RAM 50 2.4 L4 GAS
When the ignition is turned On, the lamp will light for approximately 6-12 seconds as a bulb inspection. If the lamp is illuminated with the engine running, the vehicle is usually drivable but the electronic throttle system must be diagnosed and servic...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge RAM 50 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1991 Dodge RAM 50 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1991 Dodge RAM 50 cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Check Engine Lamp -> Ram 50
Vehicle: 1991 Dodge RAM 50 2.4 L4 GAS
When the ignition is turned On, the lamp will light for 2 to 3 seconds as a bulb inspection. If the lamp remains on, a malfunction in the PCM monitoring system is indicated. After servicing the indi...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge RAM 50 MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Dodge RAM 50 vehicle.
|
| Access the Complete guide! |
