Auto Parts Search
We have info for following modifications of 1990 Pontiac Lemans
- 1990 Pontiac Lemans GSE 2.0 L4 GAS, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:K
- 1990 Pontiac Lemans LE 1.6 L4 GAS, CC:1588, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:6
- 1990 Pontiac Lemans LE Aerocoupe 1.6 L4 GAS, CC:1588, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:6
- 1990 Pontiac Lemans Value Leader 1.6 L4 GAS, CC:1588, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:6
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Pontiac Lemans AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Pontiac Lemans cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Pontiac Lemans GSE 2.0 L4 GAS
- Loosen both upper strut mount attaching bolts.
- Remove wheel cover, then loosen wheel lug nuts and remove cotter pin and drive axle shaft-to-hub nut and washer.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove ball joint retaining clip and stud nut, then separate ball joint from steering knuckle using ball joint separator tool No. J-36226 or equivalent. Disregard ``This Side Towards Wheel'' marking on tool. Tool must be turned to opposite position when used on these vehicles.
- Remove tie rod nut, then separate tie rod from steering knuckle using tie rod separato...
CLICK HERE TO GET FULL ACCESS TO 1990 Pontiac Lemans DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Pontiac Lemans AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Pontiac Lemans cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Pontiac Lemans Value Leader 1.6 L4 GAS
- Loosen both upper strut mount attaching bolts.
- Remove wheel cover, then loosen wheel lug nuts and remove cotter pin and drive axle shaft-to-hub nut and washer.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove ball joint retaining clip and stud nut, then separate ball joint from steering knuckle using ball joint separator tool No. J-36226 or equivalent. Disregard ``This Side Towards Wheel'' marking on tool. Tool must be turned to opposite position when used on these vehicles.
- Remove tie rod nut, then separate tie rod from steering knuckle using tie rod separato...
CLICK HERE TO GET FULL ACCESS TO 1990 Pontiac Lemans DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Pontiac Lemans AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Pontiac Lemans cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Pontiac Lemans LE 1.6 L4 GAS
- Loosen both upper strut mount attaching bolts.
- Remove wheel cover, then loosen wheel lug nuts and remove cotter pin and drive axle shaft-to-hub nut and washer.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove ball joint retaining clip and stud nut, then separate ball joint from steering knuckle using ball joint separator tool No. J-36226 or equivalent. Disregard ``This Side Towards Wheel'' marking on tool. Tool must be turned to opposite position when used on these vehicles.
- Remove tie rod nut, then separate tie rod from steering knuckle using tie rod separato...
CLICK HERE TO GET FULL ACCESS TO 1990 Pontiac Lemans DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Pontiac Lemans AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Pontiac Lemans cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Pontiac Lemans LE Aerocoupe 1.6 L4 GAS
- Loosen both upper strut mount attaching bolts.
- Remove wheel cover, then loosen wheel lug nuts and remove cotter pin and drive axle shaft-to-hub nut and washer.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove ball joint retaining clip and stud nut, then separate ball joint from steering knuckle using ball joint separator tool No. J-36226 or equivalent. Disregard ``This Side Towards Wheel'' marking on tool. Tool must be turned to opposite position when used on these vehicles.
- Remove tie rod nut, then separate tie rod from steering knuckle using tie rod separato...
CLICK HERE TO GET FULL ACCESS TO 1990 Pontiac Lemans DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1990 Pontiac Lemans vehicle. |
Access the Complete guide! |