Auto Parts Search
We have info for following modifications of 1990 Nissan Pulsar NX
- 1990 Nissan Pulsar NX XE 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:G
- 1990 Nissan Pulsar NX 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:G
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Nissan Pulsar NX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Nissan Pulsar NX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Nissan Pulsar NX 1.6 L4 GAS
- Raise and support vehicle.
- Remove wheels and tires.
- Remove wheel bearing lock nut.
- Brake caliper need not be disconnected. Do not twist or stretch brake hose when moving components.
- Remove cotter pin and nut securing lower ball joint to knuckle.
- Strike knuckle with a hammer and pull down transverse link to separate lower ball joint from knuckle.
- Remove tie-rod ball joint.
- Separate drive shaft from knuckle by slightly tapping it. If it is hard to remove, use a puller. When removing drive shaft, cover boots with shop towel to prevent damage to them.
- Remove right dri...
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Pulsar NX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Nissan Pulsar NX AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Nissan Pulsar NX cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Nissan Pulsar NX XE 1.6 L4 GAS
- Raise and support vehicle.
- Remove wheels and tires.
- Remove wheel bearing lock nut.
- Brake caliper need not be disconnected. Do not twist or stretch brake hose when moving components.
- Remove cotter pin and nut securing lower ball joint to knuckle.
- Strike knuckle with a hammer and pull down transverse link to separate lower ball joint from knuckle.
- Remove tie-rod ball joint.
- Separate drive shaft from knuckle by slightly tapping it. If it is hard to remove, use a puller. When removing drive shaft, cover boots with shop towel to prevent damage to them.
- Remove right dri...
CLICK HERE TO GET FULL ACCESS TO 1990 Nissan Pulsar NX DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1990 Nissan Pulsar NX vehicle. |
Access the Complete guide! |