Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Ford Ranger car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Ford Ranger automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Ford Ranger
- 2008 Ford Ranger XL 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 2008 Ford Ranger XL 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2008 Ford Ranger XL 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:D
- 2008 Ford Ranger XLT 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 2008 Ford Ranger XLT 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2008 Ford Ranger XLT 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:D
- 2008 Ford Ranger FX4 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2008 Ford Ranger Sport 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 2008 Ford Ranger Sport 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
BRAKE SERVICE PROCEDURES FOR 2008 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford Ranger cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> E-250 w/Tension Limiter -> E-450 & E-550 -> E-Super Duty -> Expedition, Explorer, F-Super Duty, Mountaineer & Navigator -> Freestar & Monterey -> Parking Brake -> Rear Disc
Vehicle: 2008 Ford Ranger Sport 3.0 V6 GAS
Parking Brake
Expedition, Explorer, F-Super Duty, Mountaineer & Navigator
Rear Disc
- Remove rear disc brake rotor as outlined in .
- Measure inside diameter of parking brake drum using brake adjustment gauge tool No. D81L-1103-A, or equivalent, Fig. .
- Adjust parking brake shoe to .020 inch (.508 mm) less than drum measurement, Fig. .
- Reverse procedure to install.
E-Super Duty
E-250 w/Tension Limiter
- Loosen tension limiter nut to end of tension limiter threads.
- Depress brake pedal to last detent position (17 clicks).
- Measure and record exposed length of cinch strap, Fig. .
- Tighten tension limiter n...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford Ranger cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Cleaning & Inspection -> Disassemble -> E-150, E-250, E-350 & E-450 -> E-150, E-250, E-350 & E-550 -> E-450 -> E-550 -> E-Series -> Edge & MKX -> Escape & Mariner -> Expedition & Navigator -> Expedition, F-Super Duty, Motorhome & Navigator -> Explorer & Mountaineer -> Explorer Sport/Sport Trac -> Explorer, Explorer Sport/Sport Trac, Mountaineer & Ranger -> F-150 & Mark LT -> F-Super Duty & Motorhome -> Freestar & Monterey -> Front -> Inspection -> Installation -> Overhaul -> Ranger -> Rear -> Removal -> Replacement
Vehicle: 2008 Ford Ranger XL 2.3 L4 GAS
Replacement
Edge & MKX
- Syphon and discard a portion of brake fluid from master cylinder.
- Raise and support vehicle, then remove wheel and tire assembly.
- Position frame side of C-clamp on inboard side of disc brake caliper. Do not place clamp frame over front brake hose.
- Position screw side of C-clamp on outboard brake shoe and lining, then tighten C-clamp until there is enough clearance to remove caliper.
- Remove front brake hose flow bolt, then disconnect and plug front brake hose. Discard copper washers.
- Remove two caliper slide pins.
- Slide brake shoe and lining out of front disc brake...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford Ranger cars and light trucks from 1990+.
Disc Brakes -> Troubleshooting -> Brake Noise -> Brake Pedal Eases Down Slowly -> Brake Pedal Goes Down Fast -> Brakes Drag -> Brakes Lock Up During Light Brake Pedal Force -> Brakes Pull Or Drift -> Excessive Brake Pedal Effort -> Excessive Or Erratic Brake Pedal Travel -> Red Brake Warning Indicator Always On
Vehicle: 2008 Ford Ranger XLT 2.3 L4 GAS
Brakes Pull Or Drift
- Tire air pressure.
- Wheel alignment.
- Brake pads, shoes or linings.
- Brake or suspension components.
Red Brake Warning Indicator Always On
- Instrument cluster.
- Warning indicator circuit.
- Parking brake.
- Brake fluid level.
Brake Pedal Goes Down Fast
- Brake fluid level.
- Air in system.
- Brake master cylinder fault.
- Normal RABS or ABS function.
Brake Pedal Eases Down Slowly
- Air in system.
- Brake master cylinder fault.
- Normal RABS or ABS function.
Brakes Lock Up During Light Brake Pedal Force
- Disc or drum brake component.
- Parking brake component...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford Ranger cars and light trucks from 1990+.
Drum Brakes -> Ranger -> Precautions
Vehicle: 2008 Ford Ranger XLT 4.0 V6 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations, precautions should be taken to minimize exposure. Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent excessive asbestos exposure.
- Wear a suitable respirator approved for asbest...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford Ranger cars and light trucks from 1990+.
Drum Brakes -> Ranger -> Adjustments -> Drums Installed -> Drums Removed -> Parking Brake -> Service Brake
Vehicle: 2008 Ford Ranger XL 3.0 V6 GAS
Service Brake
The rear brake shoes adjust automatically when the vehicle is driven in reverse and the brakes are applied sharply several times. Manual adjustment is required only when brake shoes are replaced. When adjusting rear brakes, ensure parking brake is properly adjusted and adjuster is operating freely.
Drums Removed
- With drums removed, clean areas where shoes contact backing plate, then apply suitable lubricant to contact areas. Ensure lubricant does not contaminate linings.
- Adjust gauge to inside diameter of brake drum using suitable brake shoe adjusting gauge.
- Reverse tool an...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Ranger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Ford Ranger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Ford Ranger cars and light trucks from 1990+.
Anti-Lock Brakes -> Ranger -> Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Pinpoint Tests
Vehicle: 2008 Ford Ranger XL 2.3 L4 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool and Vehicle Communication Module (VCM) with appropriate adapters, or equivalents, to the Data Link Connector (DCL) located in the passenger compartment beneath the instrument panel. Follow tool manufacturer's instructions for accessing Diagnostic Trouble Codes (DTC).
Diagnostic Trouble Code Interpretation
Refer to Fig. ...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2008 Ford Ranger BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
