Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 BMW 325XI car and truck
repair procedures including BMW engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 BMW 325XI automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2001 BMW 325XI
- 2001 BMW 325XI 2.5 L6 GAS, CC:2494, CID:152, Fuel Injection, Aspiration:152
- 2001 BMW 325XI Sport Wagon 2.5 L6 GAS, CC:2494, CID:152, Fuel Injection, Aspiration:152
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 BMW 325XI AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 BMW 325XI cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> FRONT -> REAR
Vehicle: 2001 BMW 325XI 2.5 L6 GAS
FRONT
- Remove front, middle and rear engine splash shields.
- Remove front axle support righthand heat shield.
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove ABS sensor.
- Disconnect control arm ride level sensor.
- Disconnect brake hose from mounting.
- Remove mounting bolts and support brake caliper aside with hoses connected.
- Disconnect stabilizer link from bar.
- Remove axle shaft collar nut.
- Press output shaft out of drive flange.
- Disconnect front axle support control arm at front and rear.
- Tilt steering knuckle to one side.
- Remove output shaft from differential usin...
CLICK HERE TO GET FULL ACCESS TO 2001 BMW 325XI DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 BMW 325XI AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 BMW 325XI cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> FRONT -> REAR
Vehicle: 2001 BMW 325XI Sport Wagon 2.5 L6 GAS
FRONT
- Remove front, middle and rear engine splash shields.
- Remove front axle support righthand heat shield.
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove ABS sensor.
- Disconnect control arm ride level sensor.
- Disconnect brake hose from mounting.
- Remove mounting bolts and support brake caliper aside with hoses connected.
- Disconnect stabilizer link from bar.
- Remove axle shaft collar nut.
- Press output shaft out of drive flange.
- Disconnect front axle support control arm at front and rear.
- Tilt steering knuckle to one side.
- Remove output shaft from differential usin...
CLICK HERE TO GET FULL ACCESS TO 2001 BMW 325XI DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



