Auto Parts Search
2009 Infiniti M35 CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Infiniti REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Infiniti M35 AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 2009 Infiniti M35 X 3.5 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove split pin and driveshaft castle nut and washer from front hub.
- Remove stabilizer connecting rod mounting bracket bolts and free stabilizer connecting rod.
- Separate wheel hub and bearing assembly from driveshaft by lightly tapping end with suitable tool and wood block, then re...
CLICK HERE TO GET FULL ACCESS TO 2009 Infiniti M35 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Infiniti M35 AUTOMOBILES
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2009 Infiniti M35 X 3.5 V6 GAS
Refer to Fig. for system wi...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2009 Infiniti M35 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Infiniti M35 AUTOMOBILES
Starter, Replace -> 2WD -> AWD
Vehicle: 2009 Infiniti M35 X 3.5 V6 GAS
AWD
- Disconnect battery ground terminal.
- Remove engine undercover.
- Remove B+ terminal nut.
- Disconnect S connector.
- Remove starter motor mounting bolts and harness bracket.
- Remove front drive shaft left side housing bolts.
- Move a front drive shaft left side forward.
- Remove starter motor from vehicle.
- Reverse procedure to install, noting the following:
- Torque starter mounting bolts to 35 ft. lbs.
- Torque starter S terminal nut to 76 in. lbs.
2WD
- Disconnect battery ground terminal.
- ...
CLICK HERE TO GET FULL ACCESS TO 2009 Infiniti M35 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2009 Infiniti M35 AUTOMOBILES
Cabin Air Filter Service -> Infiniti -> 2006-09 M35 & M45
Vehicle: 2009 Infiniti M35 3.5 V6 GAS
Under normal operating conditions the cabin air filter should be replaced every 12 months or 15,000 miles. In dusty areas change the cabin air filter more often.
- Open the glove compartment.
- Remove the glove compartment damper pin from the lefthand side, Fig. .
- Remove the passenger side instrument panel lower cover, then the side cover, Fig. .
- Remove the glove compartment retainers, then disconnect the electrical connectors and remove the glove compartment.
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 2009 Infiniti M35 CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Infiniti M35 AUTOMOBILES
Infiniti -> Four Wheel Assist Steer (4WAS) Warning Lamp ->
Vehicle: 2009 Infiniti M35 X 3.5 V6 GAS
When the ignition switch is placed in the on position, the 4WAS warning lamp will light as a bulb check but should go off soon after the engine is started. If the 4WAS warning light comes on while the engine is running, a malfunction with the 4WAS portion of the steering system may be present...
CLICK HERE TO GET FULL ACCESS TO 2009 Infiniti M35 MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Infiniti M35 AUTOMOBILES
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2009 Infiniti M35 X 3.5 V6 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at water inlet.
- Remove hose from water inlet.
- Remove hose from vehicle.
- Reverse procedure t...
CLICK HERE TO GET FULL ACCESS TO 2009 Infiniti M35 RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Infiniti M35 AUTOMOBILES
Serpentine Drive Belt, Replace -> Air Conditioning -> Alternator and Power Steering
Vehicle: 2009 Infiniti M35 X 3.5 V6 GAS
Alternator and Power Steering
- Disconnect battery ground cable from battery.
- Remove front engine undercover with suitable tool.
- Loosen idler pulley lock nut and adjust tension by turning adjusting bolt.
- Remove drive belt.
- Clean and inspect belt surfaces of all pulleys.
- Reverse procedure to install, noting the following:
- Torque alternator idle...
CLICK HERE TO GET FULL ACCESS TO 2009 Infiniti M35 SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Infiniti M35 AUTOMOBILES
OEM TSB listings for most 2009 Infiniti M35 cars and light trucks sold in the U.S. from 1985+.
Document: INTELLIGENT KEY BATTERY REPLACEMENT AND BATTERY DISCHARGE INDICATOR RESET Vehicle: 2009 Infiniti M35 X 3.5 V6 GAS Auto Systems: |
Document: 7 Speed A/T Harsh 4>3 Downshift On Deceleration Vehicle: 2009 Infiniti M35 X 3.5 V6 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2009 Infiniti M35 TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Infiniti M35 AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Infiniti M35 cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Infiniti M35 cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Infiniti M35 cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Infiniti M35 cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Infiniti M35 SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Infiniti M35 vehicle. |
Access the Complete guide! |