Auto Parts Search
2008 Porsche 911 CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Porsche REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Porsche 911 AUTOMOBILES
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2008 Porsche 911 Carrera S 3.8 H6 GAS
Remove
- With an assistant applying brakes, remove axle shaft nut.
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Remove inner end of drive shaft from transmission. Wrap shop towels or a suitable piece of rubber hose around drive shaft for protection.
- Carefully press out pin of drive shaft, using universal drive shaft/wheel hub extractor tool, until shaft can be moved by hand.
- Disengage parking brake cable from parking brake lever in passenger compartment as follows:
- Undo parking brake lever Do not operate until after installation is complete! Self-adjusting!
- Open cover...
CLICK HERE TO GET FULL ACCESS TO 2008 Porsche 911 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Porsche 911 AUTOMOBILES
Component Locations
Vehicle: 2008 Porsche 911 GT3 3.6 H6 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2008 Porsche 911 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Porsche 911 AUTOMOBILES
Alternator, Replace
Vehicle: 2008 Porsche 911 Turbo 3.6 H6 GAS
- Disconnect battery ground cable at battery.
- Remove mounting bolt for air cleaner housing and hose clamp on throttle body.
- Disconnect connector on air flow sensor and remove complete air cleaner assembly.
- Remove drive belt.
- Disconnect electrical connector on vacuum switchover valve and unclip switchover valve from holder.
- Remove intake distributor.
- Remove alternator mounting bolts and remove deflection roller.
- Alte...
CLICK HERE TO GET FULL ACCESS TO 2008 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2008 Porsche 911 AUTOMOBILES
Cabin Air Filter Service -> Porsche -> 2005-09 Boxster, Cayman & 911
Vehicle: 2008 Porsche 911 GT2 3.6 H6 GAS
On 2005-07 models, the cabin air filter should be replaced every 20,000 miles. The filter should be replaced more often if air flow is less than normal.
On 2008-09 models, the cabin air filter should be replaced every 36,000 miles. The filter should be replaced more often if air flow is less than normal.
- Open the luggage compartment lid.
- Remove the battery cover.
- Remove the right plenum chamber cover.
- Loosen the telephone antenna at the two top retaining screws and remove the two bottom retaining screws, then...
CLICK HERE TO GET FULL ACCESS TO 2008 Porsche 911 CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Porsche 911 AUTOMOBILES
Porsche -> Air Bag Warning Lamp ->
Vehicle: 2008 Porsche 911 Targa 4S 3.8 H6 GAS
The Air Bag warning lamp will light briefly when the ignition switch is placed in the on position as a bulb check. If the...
CLICK HERE TO GET FULL ACCESS TO 2008 Porsche 911 MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Porsche 911 AUTOMOBILES
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2008 Porsche 911 GT2 3.6 H6 GAS
Inlet
- Drain coolant into a suitable container.
- Reposition clamp at heater core and remove hose.
- Reposition clamp at hot air duct supply and remove hose.
- Remove hose from vehicle.
- Reverse procedure t...
CLICK HERE TO GET FULL ACCESS TO 2008 Porsche 911 RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Porsche 911 AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2008 Porsche 911 Carrera 4S 3.8 H6 GAS
Do not remove drive belt when engine is warm! Risk of damage or deformation! Drive belts should only be removed when they have cooled down.
- R...
CLICK HERE TO GET FULL ACCESS TO 2008 Porsche 911 SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2008 Porsche 911 AUTOMOBILES
OEM TSB listings for most 2008 Porsche 911 cars and light trucks sold in the U.S. from 1985+.
Document: WARRANTY ADMINISTRATION - CSO SURCHARGES NOT ALLOWED ON WARRANTY CLAIMS Vehicle: 2008 Porsche 911 Targa 4 3.6 H6 GAS Auto Systems: |
Document: OVERVIEW OF APPROVED ENGINE OILS - REVISED Vehicle: 2008 Porsche 911 Targa 4 3.6 H6 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2008 Porsche 911 TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2008 Porsche 911 AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2008 Porsche 911 cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2008 Porsche 911 cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2008 Porsche 911 cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2008 Porsche 911 cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2008 Porsche 911 SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Porsche 911 vehicle. |
Access the Complete guide! |