Auto Parts Search
We have info for following modifications of 2008 Honda Pilot
- 2008 Honda Pilot Value Package 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot Special Edition 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot EX 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot Value Package 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot Special Edition 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot EX 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot EX-L 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot EX-L 3.5 V6 GAS, CC:3471, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Honda Pilot cars and light trucks sold in the U.S. from 1990+.
Honda -> Vehicle Stability Assist (VSA) System Warning Lamp -> 2005-09 Pilot
Vehicle: 2008 Honda Pilot EX-L 3.5 V6 GAS
The VSA warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. Even though the system is operating properly, the activation indicator may come on if the VSA switch has been manually turn...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Honda Pilot cars and light trucks sold in the U.S. from 1990+.
Honda -> Traction Control System (TCS) Warning Indicator ->
Vehicle: 2008 Honda Pilot EX 3.5 V6 GAS
The Traction Control System warning lamp is used to warn of a system fault. The lamp monitors the condition of the Traction Control System system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the Tra...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Honda Pilot cars and light trucks sold in the U.S. from 1990+.
Honda -> Check Engine Lamp -> 2003-09 Pilot
Vehicle: 2008 Honda Pilot EX 3.5 V6 GAS
The Check Engine/PGM-FI Warning Indicator Lamp should be illuminated for a few seconds after the ignition switch is placed in the on position as a bulb check and then the lamp should go off. If the lamp remains lit, a problem in the Programmed Fuel Injection (PGM-FI) system is indicated and a diagnostic trouble code is stored in the Electronic Control Unit (ECU) memory. After diagnosis and repair, clear the ECU memory of diagnostic trouble codes.
After diagnosis and repair, clear the ECU memory of diagnostic trouble codes. With ignition switch...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Honda Pilot cars and light trucks sold in the U.S. from 1990+.
Honda -> Anti-Lock Brake System (ABS)/VSA System Warning Lamp -> 2006-09 Pilot
Vehicle: 2008 Honda Pilot Value Package 3.5 V6 GAS
The ABS warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. Even though the system is operating properly, the indicator may come on if the vehicle goes into a spin, on...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Honda Pilot cars and light trucks sold in the U.S. from 1990+.
Honda -> Automatic Transmission D, D4 Or D5 Indicator Lamp -> 2005-09 Pilot
Vehicle: 2008 Honda Pilot Special Edition 3.5 V6 GAS
When the PCM detects an abnormal automatic transmission input or output signal the D lamp will usually blink and or the MIL will be illuminated. After completing diagnosis and repairs, reset the D and or MIL as follows:
- Wit...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Honda Pilot cars and light trucks sold in the U.S. from 1990+.
Honda -> Maintenance Required Lamp -> 2003-09 Pilot
Vehicle: 2008 Honda Pilot EX 3.5 V6 GAS
- Turn ignition On.
- Press trip meter SELECT/RESET button repeatedly until engine oil life indicator is displayed, Fig. .
- Press and hold SELECT/RESET button for approximately 10 seconds until the engine oil ...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Honda Pilot vehicle. |
Access the Complete guide! |