Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Cadillac SRX car and truck
repair procedures including Cadillac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Cadillac SRX automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Cadillac SRX
- 2008 Cadillac SRX 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:A
- 2008 Cadillac SRX 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Cadillac SRX AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Cadillac SRX cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Cadillac SRX 4.6 V8 GAS
- Disconnect battery ground cable.
- Remove air conditioning, power steering, and water pump belt drive belt.
- Remove alternator drive belt.
- Remove upper alternator mounting bolts.
- Raise and support vehicle.
- Remove push-in retainers and front air deflector.
- On models equipped with all wheel drive (AWD),remove front wheels.
- Loosen push pins and remove right side wheelhouse liner.
- Remove stabilizer shaft link nuts and link from vehicle.
- Rotate stabilizer shaft downward to gain access to alternator and to create a removal envelop for alternator removal.
- Perform remainder of removal process th...
CLICK HERE TO GET FULL ACCESS TO 2008 Cadillac SRX STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Cadillac SRX AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Cadillac SRX cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Cadillac SRX 3.6 V6 GAS
- Disconnect battery ground cable.
- Remove starter solenoid electrical connector from starter.
- Remove starter terminal nut and battery positive cable from starter.
- Remove starter moto...
CLICK HERE TO GET FULL ACCESS TO 2008 Cadillac SRX STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Cadillac SRX AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Cadillac SRX cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Cadillac SRX 3.6 V6 GAS
- Disconnect battery ground cable.
- Remove drive belt.
- Raise and support vehicle.
- Disconnect engine harness electrical connector from alternator.
- Reposition battery positive lead boot.
- Remove attaching nut and positive lead from alternator.
- Remove lower ...
CLICK HERE TO GET FULL ACCESS TO 2008 Cadillac SRX STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Cadillac SRX AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Cadillac SRX cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Cadillac SRX 4.6 V8 GAS
- Disconnect battery ground cable.
- Remove cross car brace mounting bolts and brace.
- Remove power steering and engine oil fill caps.
- Lift up on fuel injector sight shield, pull it forward and remove it.
- Remove retaining clip and PCV dirty air tube.
- Remove PCV fresh air tube.
- Remove sight shield bracket nuts and bracket.
- Disconnect fuel injector electrical connectors from fuel injectors.
- Disconnect evaporative emission purge valve line and electrical connector.
- Remove EVAP line from retaining feature at rear of right cylinder head and move aside.
- Relieve fuel system pressure, using a suitabl...
CLICK HERE TO GET FULL ACCESS TO 2008 Cadillac SRX STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Cadillac SRX vehicle.
|
| Access the Complete guide! |
