Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Buick Enclave car and truck
repair procedures including Buick engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Buick Enclave automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Buick Enclave
- 2008 Buick Enclave CXL 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
- 2008 Buick Enclave CX 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Buick Enclave AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Buick Enclave cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Buick Enclave CXL 3.6 V6 GAS
- Disconnect battery ground cable.
- Remove drive belt.
- Remove oil fill cap, then fuel injector sight shield from ball studs.
- Remove engine mount strut bolt.
- Remove engine mount strut bracket bolt, then engine mount strut bracket.
- Remove air conditioning liquid line clamp bolt from upper radiator support.
- Remove coolant recovery reservoir bolts.
- Remove reservoir tabs from upper radiator support, position reservoir aside.
- Reposition battery positive junction block cable boot.
- Remove battery positive junction block cable to alternator nut.
- Remove battery positive junction block cable termin...
CLICK HERE TO GET FULL ACCESS TO 2008 Buick Enclave STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Buick Enclave AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Buick Enclave cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Buick Enclave CX 3.6 V6 GAS
- Disconnect battery ground cable.
- Remove drive belt.
- Remove oil fill cap, then fuel injector sight shield from ball studs.
- Remove engine mount strut bolt.
- Remove engine mount strut bracket bolt, then engine mount strut bracket.
- Remove air conditioning liquid line clamp bolt from upper radiator support.
- Remove coolant recovery reservoir bolts.
- Remove reservoir tabs from upper radiator support, position reservoir aside.
- Reposition battery positive junction block cable boot.
- Remove battery positive junction block cable to alternator nut.
- Remove battery positive junction block cable termin...
CLICK HERE TO GET FULL ACCESS TO 2008 Buick Enclave STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Buick Enclave AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Buick Enclave cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Buick Enclave CXL 3.6 V6 GAS
- Disconnect battery ground cable.
- Remove left catalytic convertor.
- Remove oil fill cap, then fuel injector sight shield from ball studs.
- Disconnect engine wiring harness electrical connector from heated oxygen sensor electrical connector.
- Remove HO2S electrical connector retainer from engine wiring harness clip.
- Remove exhaust manifold heat shield bolts and heat shield.
- Remove frame brace bolts and brace.
- Disconnect heated oxygen sensor electrical connector from engine wiring harness electrical connector.
- Remove catalytic converter hanger clamp nut, if required.
- Remove catalytic converte...
CLICK HERE TO GET FULL ACCESS TO 2008 Buick Enclave STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Buick Enclave AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Buick Enclave cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Buick Enclave CX 3.6 V6 GAS
- Disconnect battery ground cable.
- Remove left catalytic convertor.
- Remove oil fill cap, then fuel injector sight shield from ball studs.
- Disconnect engine wiring harness electrical connector from heated oxygen sensor electrical connector.
- Remove HO2S electrical connector retainer from engine wiring harness clip.
- Remove exhaust manifold heat shield bolts and heat shield.
- Remove frame brace bolts and brace.
- Disconnect heated oxygen sensor electrical connector from engine wiring harness electrical connector.
- Remove catalytic converter hanger clamp nut, if required.
- Remove catalytic converte...
CLICK HERE TO GET FULL ACCESS TO 2008 Buick Enclave STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Buick Enclave vehicle.
|
| Access the Complete guide! |
