Auto Parts Search
We have info for following modifications of 2008 Audi A6 Quattro
- 2008 Audi A6 Quattro 3.2 V6 GAS, CC:3123, Fuel Injection
- 2008 Audi A6 Quattro 4.2 V8 GAS, CC:4163, Fuel Injection
- 2008 Audi A6 Quattro Avant 3.2 V6 GAS, CC:3123, Fuel Injection
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Audi A6 Quattro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Audi A6 Quattro cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Audi A6 Quattro 4.2 V8 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Loosen fasteners and remove noise insulation.
- Remove electrical harness connector from bracket and disconnect it from cooling fan control connector.
- Release clip and lay coolant fan control (FC) module aside.
- Before removing drive belt, mark direction of rotation. Belt damage will result if not reinstalled in proper direction.
- Relieve drive belt tension by turning tensioner clockwise, using a suitable tool.
- Remove drive belt from alternator pulley and release tensioner.
- Clamp coolant hoses, using suitable hose clamps. Place...
CLICK HERE TO GET FULL ACCESS TO 2008 Audi A6 Quattro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Audi A6 Quattro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Audi A6 Quattro cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Audi A6 Quattro 3.2 V6 GAS
- Disconnect battery ground cable.
- Remove engine cover.
- Before removing drive belt, mark direction of rotation. Belt damage will result if not reinstalled in proper direction.
- Relieve drive belt tension by turning tensioner clockwise, using a suitable tool.
- Remove drive belt from alternator pulley.
- Release tensioner.
- Raise and support vehicle.
- Remove quick-release screws...
CLICK HERE TO GET FULL ACCESS TO 2008 Audi A6 Quattro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Audi A6 Quattro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Audi A6 Quattro cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Audi A6 Quattro 4.2 V8 GAS
- Disconnect battery ground cable.
- Remove rear engine cover.
- Remove rubber seal and plenum chamber cover.
- Remove bolts air guides.
- Move fuel line and line to EVAP canister at air filter housing and air guide pipe aside.
- Disconnect electrical harness connector at mass air flow (MAF) Sensor.
- Remove bolts and air guides.
- Disconnect vacuum line at throttle body.
- Disconnect electrical harness connector at mass air flow (MAF) Sensor.
- Open hose clamps and remove air guide pipe from air filter housing.
- Open clips and remove upper air filter housing.
- Disconnect vacuum line at air filter housing.
- Remo...
CLICK HERE TO GET FULL ACCESS TO 2008 Audi A6 Quattro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Audi A6 Quattro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Audi A6 Quattro cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Audi A6 Quattro Avant 3.2 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove right front wheel.
- Secure brake disc with a wheel bolt.
- Release fasteners and remove front and rear noise insulation.
- Remove right drive shaft heat shield.
- Remove nut at starter solenoid B+ terminal and remove connector from terminal.
- Disconnect electrical connector at starter.
- Remove starter mounting bolts and starter.
- On models equipped wi...
CLICK HERE TO GET FULL ACCESS TO 2008 Audi A6 Quattro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Audi A6 Quattro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Audi A6 Quattro cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Audi A6 Quattro Avant 3.2 V6 GAS
- Disconnect battery ground cable.
- Remove engine cover.
- Before removing drive belt, mark direction of rotation. Belt damage will result if not reinstalled in proper direction.
- Relieve drive belt tension by turning tensioner clockwise, using a suitable tool.
- Remove drive belt from alternator pulley.
- Release tensioner.
- Raise and support vehicle.
- Remove quick-release screws...
CLICK HERE TO GET FULL ACCESS TO 2008 Audi A6 Quattro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Audi A6 Quattro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Audi A6 Quattro cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Audi A6 Quattro 3.2 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove right front wheel.
- Secure brake disc with a wheel bolt.
- Release fasteners and remove front and rear noise insulation.
- Remove right drive shaft heat shield.
- Remove nut at starter solenoid B+ terminal and remove connector from terminal.
- Disconnect electrical connector at starter.
- Remove starter mounting bolts and starter.
- On models equipped wi...
CLICK HERE TO GET FULL ACCESS TO 2008 Audi A6 Quattro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Audi A6 Quattro vehicle. |
Access the Complete guide! |