Auto Parts Search
We have info for following modifications of 2007 Volvo V50
- 2007 Volvo V50 T5 2.5 L5 GAS, CC:2521, Fuel Injection
- 2007 Volvo V50 2.4I 2.4 L5 GAS, CC:2435, Fuel Injection
- 2007 Volvo V50 2.4I 2.4 L5 GAS, CC:2435, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Volvo V50 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Volvo V50 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Left Side -> Right Side
Vehicle: 2007 Volvo V50 2.4I 2.4 L5 GAS
Left Side
- Raise and support vehicle on lift.
- Remove hub cap.
- Remove front wheel lug nuts.
- Remove bolt for wheel hub driveshaft.
- Tap end of drive shaft approximately 15-20mm into wheel hub.
- Remove anti-roll bar strut from spring strut.
- Counterhold ball joint pinion so that ball joint boot cannot turn.
- Detach brake hose from its mounting lug in spring strut.
- Detach ABS line from its mounting lug in wheel arch.
- Slacken off nut for ball joint for control arm. Before removing the nuts from the ball joints, clean the exposed threads of rust. Lubricate using rust solvent before removing t...
CLICK HERE TO GET FULL ACCESS TO 2007 Volvo V50 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Volvo V50 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Volvo V50 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Left Side -> Right Side
Vehicle: 2007 Volvo V50 T5 2.5 L5 GAS
Left Side
- Raise and support vehicle on lift.
- Remove hub cap.
- Remove front wheel lug nuts.
- Remove bolt for wheel hub driveshaft.
- Tap end of drive shaft approximately 15-20mm into wheel hub.
- Remove anti-roll bar strut from spring strut.
- Counterhold ball joint pinion so that ball joint boot cannot turn.
- Detach brake hose from its mounting lug in spring strut.
- Detach ABS line from its mounting lug in wheel arch.
- Slacken off nut for ball joint for control arm. Before removing the nuts from the ball joints, clean the exposed threads of rust. Lubricate using rust solvent before removing t...
CLICK HERE TO GET FULL ACCESS TO 2007 Volvo V50 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Volvo V50 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Volvo V50 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Left Side -> Right Side
Vehicle: 2007 Volvo V50 2.4I 2.4 L5 GAS
Left Side
- Raise and support vehicle on lift.
- Remove hub cap.
- Remove front wheel lug nuts.
- Remove bolt for wheel hub driveshaft.
- Tap end of drive shaft approximately 15-20mm into wheel hub.
- Remove anti-roll bar strut from spring strut.
- Counterhold ball joint pinion so that ball joint boot cannot turn.
- Detach brake hose from its mounting lug in spring strut.
- Detach ABS line from its mounting lug in wheel arch.
- Slacken off nut for ball joint for control arm. Before removing the nuts from the ball joints, clean the exposed threads of rust. Lubricate using rust solvent before removing t...
CLICK HERE TO GET FULL ACCESS TO 2007 Volvo V50 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2007 Volvo V50 vehicle. |
Access the Complete guide! |