Auto Parts Search
We have info for following modifications of 2007 Buick Lucerne
- 2007 Buick Lucerne CXL 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:Y
- 2007 Buick Lucerne CXL 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:2
- 2007 Buick Lucerne CX 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:2
- 2007 Buick Lucerne CXS 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:Y
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Buick Lucerne AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Buick Lucerne cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2007 Buick Lucerne CXS 4.6 V8 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Disconnect outer tie rod end from steering knuckle.
- Insert a drift or punch into brake rotor and against brake caliper in order to prevent wheel hub and bearing from turning.
- Remove and discard wheel drive shaft spindle nut that retains wheel drive shaft to hub.
- Remove stabilizer shaft link.
- Disconnect electrical connector from wheel speed sensor and reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J 42129 or equivalent onto wheel hub and...
CLICK HERE TO GET FULL ACCESS TO 2007 Buick Lucerne DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Buick Lucerne AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Buick Lucerne cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2007 Buick Lucerne CX 3.8 V6 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Disconnect outer tie rod end from steering knuckle.
- Insert a drift or punch into brake rotor and against brake caliper in order to prevent wheel hub and bearing from turning.
- Remove and discard wheel drive shaft spindle nut that retains wheel drive shaft to hub.
- Remove stabilizer shaft link.
- Disconnect electrical connector from wheel speed sensor and reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J 42129 or equivalent onto wheel hub and...
CLICK HERE TO GET FULL ACCESS TO 2007 Buick Lucerne DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Buick Lucerne AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Buick Lucerne cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2007 Buick Lucerne CXL 3.8 V6 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Disconnect outer tie rod end from steering knuckle.
- Insert a drift or punch into brake rotor and against brake caliper in order to prevent wheel hub and bearing from turning.
- Remove and discard wheel drive shaft spindle nut that retains wheel drive shaft to hub.
- Remove stabilizer shaft link.
- Disconnect electrical connector from wheel speed sensor and reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J 42129 or equivalent onto wheel hub and...
CLICK HERE TO GET FULL ACCESS TO 2007 Buick Lucerne DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Buick Lucerne AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Buick Lucerne cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2007 Buick Lucerne CXL 4.6 V8 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Disconnect outer tie rod end from steering knuckle.
- Insert a drift or punch into brake rotor and against brake caliper in order to prevent wheel hub and bearing from turning.
- Remove and discard wheel drive shaft spindle nut that retains wheel drive shaft to hub.
- Remove stabilizer shaft link.
- Disconnect electrical connector from wheel speed sensor and reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J 42129 or equivalent onto wheel hub and...
CLICK HERE TO GET FULL ACCESS TO 2007 Buick Lucerne DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2007 Buick Lucerne vehicle. |
Access the Complete guide! |