Auto Parts Search
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus GS430 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus GS430 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Overdrive (O/D) Indicator Lamp ->
Vehicle: 2006 Lexus GS430 4.3 V8 GAS
The automatic transmission electrical system possesses internal self-diagnostic capabilities. If a fault occurs within the system, the Electronic Control Module (ECM) stores a diagnostic trouble code and the "... "
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus GS430 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus GS430 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus GS430 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Engine Oil Reminder/Maintenance Required Lamp -> 2006-07 GS430
Vehicle: 2006 Lexus GS430 4.3 V8 GAS
- Push the ODO/TRIP switch in the switch box to change the display to blank.
- Place the ignition switch in the off position.
- While pressing the trip meter RESET switch, place the ignition switch in the on position.
- Keep pressing the RE...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus GS430 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus GS430 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus GS430 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Automatic Transmission Oil Temperature Warning Lamp ->
Vehicle: 2006 Lexus GS430 4.3 V8 GAS
This lamp will be illuminated when automatic transmission or transfer case fluid temperature exceeds 302°F. If the lamp lights, allow vehicle to operate at idle speed until fluid temperature falls below 248°F; t...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus GS430 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus GS430 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus GS430 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Air Bag Warning Lamp -> 2003-07 GS430
Vehicle: 2006 Lexus GS430 4.3 V8 GAS
- Connect two service wires to terminals Tc and CG of data link connector.
- Disconnect Tc within 10 seconds after DTC output begins.
- SRS warning lamps will illuminate 3 seconds later. Within 2-4 seconds, connect terminals Tc and CG of DLC.
- SRS warning lamp will go off within 2-4 seconds. Within 2-4 seconds, disconnect termi...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus GS430 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus GS430 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus GS430 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2006-07 GS430 -> Registration -> Relearn -> Reset -> System Initialization -> Tire Pressure Sensor & Transmitter -> TPMS ECU
Vehicle: 2006 Lexus GS430 4.3 V8 GAS
Reset
The Low Tire Pressure indicator lamp will flash slowly and/or sound a chime when tire pressure is low. When the tire is inflated to the proper pressure the lamp and tone will turn Off. If the lamp remains On, a problem in the low tire warning system is present and the low tire warning system must be diagnosed and serviced to reset the warning lamp.
Relearn
Registration
TPMS ECU
If replacing the TPMS ECU, prior to removal, use a suitably programmed scan tool to read the registered transmitter identification number for all wheels and note them for registration.
- Connect a suitably pr...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus GS430 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus GS430 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus GS430 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 2006 Lexus GS430 4.3 V8 GAS
On some models equipped with OBD II, the MIL will also illuminate if the fuel tank filler cap is not properly tightened. Tighten fuel tank filler cap until it clicks.
On some models equipped with OBD II, if a misfire condition which may cause damage to the catalytic converter is present, the Check engine lamp will flash once per second until vehicle operation is outside the speed and load range causing the misfire. The lamp will stop flashing and remain steady
On all models, the MIL should light when the ignition switch is placed in the On position without starting the engine. When the engine is...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus GS430 MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Lexus GS430 vehicle. |
Access the Complete guide! |