Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Acura RL car and truck
repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Acura RL automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from 1990+.
Acura -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2005-08 RL -> Less Scan Tool -> PAX System Warning -> Relearn -> Reset -> TPMS Lamp -> With Scan Tool
Vehicle: 2006 Acura RL 3.5 V6 GAS
Reset
TPMS Lamp
The Low Tire Pressure Warning lamp will illuminate for approximately as a bulb check when the ignition switch is placed in the on position. This system uses radio frequency pressure sensors which monitor pressure in all 4 tires. When operating the vehicle, the Low Tire Pressure/TPMS Warning Lamp will illuminate when low tire pressure has been detected. After all tires have been inflated to the proper pressure and vehicle has been operated the warning lamp should turn off unless a fault in the Low Tire Pressure warning system has developed.
PAX System Warning
When a tire ...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from 1990+.
Acura -> Automatic Transmission (A/T) Fluid Temperature Indicator -> 2005-09 RL
Vehicle: 2006 Acura RL 3.5 V6 GAS
The A/T fluid temperature lamp will turn on when ignition switch is placed in on position and should turn off after a few seconds. If lamp illuminates while driving, the vehicle should be pulled off the...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from 1990+.
Acura -> Vehicle Stability Assist (VSA) System Warning Lamp -> 2005-09 RL
Vehicle: 2006 Acura RL 3.5 V6 GAS
The VSA warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. Even though the system is operating properly, the activation indicator may come on if the VSA switch has been manually turned Of...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from 1990+.
Acura -> Air Bag Warning Lamp ->
Vehicle: 2006 Acura RL 3.5 V6 GAS
The air bag warning lamp will light for a few seconds when the ignition switch is placed in the on position as a bulb check. I...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from 1990+.
Acura -> Maintenance Required Lamp -> 2005-09 RL
Vehicle: 2006 Acura RL 3.5 V6 GAS
The vehicle must be stopped to reset the maintenance information display.
- Place the ignition switch in the on position. If messages are displayed, press info button to cancel.
- Press and release the SEL/RESET button until Engine Oil Life Indicator is displayed, Fig. .
- Pre...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Acura RL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Acura RL cars and light trucks sold in the U.S. from 1990+.
Acura -> Super Handling All-Wheel Drive (SH-AWD) Lamp -> 2005-09 RL
Vehicle: 2006 Acura RL 3.5 V6 GAS
When a problem is detected by self-diagnosis, the SH-AWD system turns the SH-AWD indicator On. The SH-AWD indicator lamp may also turns on under certain conditions even if the AWD system is working normally. The lamp may turn on when the vehicle is equipped with high-powered wireless equipment such as a CB radio, when the vehic...
CLICK HERE TO GET FULL ACCESS TO 2006 Acura RL MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Acura RL vehicle.
|
| Access the Complete guide! |
