Auto Parts Search
We have info for following modifications of 2005 KIA Sportage
- 2005 KIA Sportage EX 2.7 V6 GAS, CC:2656, Fuel Injection
- 2005 KIA Sportage LX 2.0 L4 GAS, CC:1975, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 KIA Sportage AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 KIA Sportage cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2005 KIA Sportage EX 2.7 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Remove bolts securing wheel speed sensor from steering knuckle.
- Disconnect tie rod ball joint from knuckle using suitable tool.
- Disconnect ball joint from steering knuckle using suitable tool.
- Remove lower arm ball joint mounting bolts.
- Tap on driveshaft front hub assembly using plastic hammer.
- Push front hub assembly outward and separate driveshaft from hub assembly.
- Insert suitable tool betwe...
CLICK HERE TO GET FULL ACCESS TO 2005 KIA Sportage DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 KIA Sportage AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 KIA Sportage cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2005 KIA Sportage LX 2.0 L4 GAS
Front
- Remove six bolts and take off free wheel hub body.
- Remove axle snap ring retainer and spacer using suitable tool.
- Pry out fixed cam assembly.
- Remove two bolts and remove brake caliper from brake rotor. Temporarily tie caliper to vehicle frame with mechanics wire
- Remove upper control arm link lock bolt, spring washer and nut.
- Remove tiered end cotter pin and us...
CLICK HERE TO GET FULL ACCESS TO 2005 KIA Sportage DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 KIA Sportage AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 KIA Sportage cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2005 KIA Sportage LX 2.0 L4 GAS
Front
- Place transmission in neutral.
- Raise and support vehicle and support it with safety stands in proper locations.
- Mark relationship of components before removal.
- Reference mark relationship of driveline to axle pinion yoke.
- Remove yoke retainer bolts and yoke retainers from front axle pinion yoke.
- Disconnect driveline from front axle pinion yoke.
- Wrap bearing caps wit tape in order to prevent loss of bearing rollers. When removing driveline do not attempt to remove shaft by pounding on yoke ears our using a tool between yoke and universal joint or damage to injection joints may...
CLICK HERE TO GET FULL ACCESS TO 2005 KIA Sportage DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 KIA Sportage vehicle. |
Access the Complete guide! |