Auto Parts Search
We have info for following modifications of 2005 Jeep Wrangler
- 2005 Jeep Wrangler SE 2.4 L4 GAS, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:1
- 2005 Jeep Wrangler Sport 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 2005 Jeep Wrangler X 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 2005 Jeep Wrangler Rubicon 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 2005 Jeep Wrangler Unlimited 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 2005 Jeep Wrangler Unlimited Rubicon 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
BRAKE SERVICE PROCEDURES FOR 2005 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Jeep Wrangler cars and light trucks from 1990+.
Disc Brakes -> Troubleshooting -> Brake Chatter -> Brake Drag -> Brake Fade -> Brake Pull -> Brake Squeal Or Squeak -> Hard Pedal Or High Pedal Effort -> Low Pedal -> Pedal Falls Away -> Pedal Pulsation -> Rear Brake Grab Or Pull -> Spongy Pedal
Vehicle: 2005 Jeep Wrangler X 4.0 L6 GAS
Pedal Falls Away
- System leak at brake line, fitting, hose or caliper/wheel cylinder.
- Internal leakage in master cylinder caused by worn or damaged piston cups.
- Internal leak in ABS or RWAL system.
Low Pedal
- Worn brake linings.
- Worn drums or rotors.
- Rear brakes out of adjustment.
Spongy Pedal
- Air in hydraulic system.
- Thin brake drums.
- Substandard brake lines and hoses.
Hard Pedal Or High Pedal Effort
- Linings that are water soaked, contaminated or glazed.
- Faulty power booster or check valve.
Pedal Pulsation
- Disc brake rotors have excessive lateral runout or thickness variation.
- Out of round brake ...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Jeep Wrangler cars and light trucks from 1990+.
Anti-Lock Brakes -> Jeep -> Diagnosis & Testing -> 2002-04 -> 2005 -> 2005-06 -> 2006 -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Commander -> Connector Pin Identification -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Grand Cherokee -> Liberty -> Wrangler
Vehicle: 2005 Jeep Wrangler X 4.0 L6 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to Data Link Connector (DLC) and follow manufacturer's instructions.
Diagnostic Trouble Code Interpretation
Commander
[[table data]]Grand Cherokee
2002-04
[[table data]]2005-06
[[table data]]Liberty
2002-04
[[table data]]2005
[[table data]]2006
[[table data]]Wrangler
[[table data]]Connector Pin Identifica...
[[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]] [[table data]]CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Jeep Wrangler cars and light trucks from 1990+.
Drum Brakes -> Jeep -> Brake Service -> Brake Shoe Installation -> Brake Shoe Removal
Vehicle: 2005 Jeep Wrangler Unlimited Rubicon 4.0 L6 GAS
Prior to removing brake shoes it is recommended that a suitable clip or restraining device be applied to the wheel cylinders to prevent the wheel cylinder pistons from being pushed out of their bores.
Brake Shoe Removal
- Raise and support vehicle.
- Remove wheel and tire assemblies, then the brake drums.
- Remove U-clip and washer from parking brake lever pivot pin, Figs. and , then discard clip.
- Remove primary and secondary return springs.
- Remove spring retainers, hold-down springs, and retaining pins.
- Install suitable clamps over ends of wheel cylinders to hold pistons in place.
- Remove adju...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Jeep Wrangler cars and light trucks from 1990+.
Anti-Lock Brakes -> Jeep -> System Service -> 2002-04 -> 2002-04 Grand Cherokee -> 2002-05 -> 2002-05 Liberty -> 2005-06 -> 2005-06 Commander, Grand Cherokee & 2006 Liberty -> 2006 -> Anti-Lock Brake Module (ABM)/Hydraulic Control Unit (HCU) -> Brake System Bleed -> Commander -> Commander, Grand Cherokee & Liberty -> Component Replacement -> Controller Anti-Lock Brake (CAB) Module/Hydraulic Control Unit (HCU) -> Front Wheel Sensor -> Grand Cherokee -> Hydraulic Control Unit (HCU) -> Liberty -> Manual/Base System -> Master Cylinder Bleed -> Pressure Bleed -> Rear Wheel Sensor -> Wrangler
Vehicle: 2005 Jeep Wrangler X 4.0 L6 GAS
Brake System Bleed
ABS system bleeding requires conventional bleeding methods plus use of the scan tool. The procedure involves performing a base brake bleeding, followed by use of the scan tool to cycle and bleed the HCU pump and solenoids. A second base brake bleeding procedure is then required to remove any air remaining in the system.
Manual/Base System
- Remove reservoir filler caps and fill reservoir with proper brake fluid.
- If calipers or wheel cylinders were overhauled, open all caliper and wheel cylinder bleed screws.
- Close each bleed screw as fluid starts to drip from them.
- Fil...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Jeep Wrangler cars and light trucks from 1990+.
Drum Brakes -> Jeep -> Precautions
Vehicle: 2005 Jeep Wrangler Rubicon 4.0 L6 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations, the amount of asbestos dust from brake lining wear is at a low level due to a chemical breakdown during use, and a few precautions will minimize exposure. Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent excessive as...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Wrangler BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Jeep Wrangler AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Jeep Wrangler cars and light trucks from 1990+.
Anti-Lock Brakes -> Jeep -> Precautions -> General Service Precautions
Vehicle: 2005 Jeep Wrangler Unlimited 4.0 L6 GAS
General Service Precautions
Certain components of the anti-lock brake system are not intended to be serviced individually. Attempting to remove or disconnect components of this type may result in personal injury and/or improper system operation. Only the components with removal and installation procedures should be serviced.
Observe the following general precautions when servicing the anti-lock b...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Wrangler BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Jeep Wrangler vehicle. |
Access the Complete guide! |