Auto Parts Search
We have info for following modifications of 2005 Jeep Liberty
- 2005 Jeep Liberty Sport 2.4 L4 GAS, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:1
- 2005 Jeep Liberty Sport 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2005 Jeep Liberty Sport 2.8 L4 DIESEL, CC:2768, CID:171, Fuel Injection, Aspiration:171, Engine VIN:, Desg:5
- 2005 Jeep Liberty Limited 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2005 Jeep Liberty Limited 2.8 L4 DIESEL, CC:2768, CID:171, Fuel Injection, Aspiration:171, Engine VIN:, Desg:5
- 2005 Jeep Liberty Renegade 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2005 Jeep Liberty Rocky Mountain Edition 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Jeep Liberty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Jeep Liberty cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2005 Jeep Liberty Limited 3.7 V6 GAS
Front
- With vehicle in neutral, position vehicle on hoist.
- Mark a line across axle pinion flange, propeller shaft, flange yoke and transfer case for installation reference.
- Support transmission and transmission crossmember.
- Remove propeller shaft from transfer case flange.
- Remove propeller shaft from axle pinion flange.
- Reverse procedure to install, noting the following:
- Align reference marks.
- Torque axle flange bolts to 22 ft. lbs.
- Torque transfer case flange bolts to 22...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Liberty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Jeep Liberty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Jeep Liberty cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2005 Jeep Liberty Renegade 3.7 V6 GAS
Clamp only the narrow forged portion of the yoke in the vise. Failure to heed caution may result in damage.
- Remove axle shaft.
- Remove bearing cap retaining snap rings. Saturate the bearing caps with penetrating oil prior to removal.
- Place socket (receiver) with inside diameter larger than bearing cap against yoke and perimeter of bearing cap to be removed.
- Pla...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Liberty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Jeep Liberty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Jeep Liberty cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2005 Jeep Liberty Sport 3.7 V6 GAS
Clamp only the narrow forged portion of the yoke in the vise. Failure to heed caution may result in damage.
- Remove axle shaft.
- Remove bearing cap retaining snap rings. Saturate the bearing caps with penetrating oil prior to removal.
- Place socket (receiver) with inside diameter larger than bearing cap against yoke and perimeter of bearing cap to be removed.
- Pla...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Liberty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Jeep Liberty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Jeep Liberty cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Jeep Liberty Sport 2.4 L4 GAS
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove half shaft hub nut.
- Remove stabilizer link.
- Remove lower clevis bolt.
- Separate lower ball joint from lower control arm.
- Pull out on steering knuckle and push half shaft out of knuckle.
- With a pry bar remove half shaft from axle. Right side half shaft has an axle shaft that may come out of the axle.
- Remove propeller shaft from pinion flange.
- Support axle with a lift/jack.
- Remove bolt from left front axle bracket frame mount.
- Remove bolts from right axl...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Liberty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Jeep Liberty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Jeep Liberty cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2005 Jeep Liberty Rocky Mountain Edition 3.7 V6 GAS
Clamp only the narrow forged portion of the yoke in the vise. Failure to heed caution may result in damage.
- Remove axle shaft.
- Remove bearing cap retaining snap rings. Saturate the bearing caps with penetrating oil prior to removal.
- Place socket (receiver) with inside diameter larger than bearing cap against yoke and perimeter of bearing cap to be removed.
- Pla...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Liberty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Jeep Liberty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Jeep Liberty cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2005 Jeep Liberty Sport 2.8 L4 DIESEL
Clamp only the narrow forged portion of the yoke in the vise. Failure to heed caution may result in damage.
- Remove axle shaft.
- Remove bearing cap retaining snap rings. Saturate the bearing caps with penetrating oil prior to removal.
- Place socket (receiver) with inside diameter larger than bearing cap against yoke and perimeter of bearing cap to be removed.
- Pla...
CLICK HERE TO GET FULL ACCESS TO 2005 Jeep Liberty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Jeep Liberty vehicle. |
Access the Complete guide! |