Auto Parts Search
We have info for following modifications of 2005 Buick Park Avenue
- 2005 Buick Park Avenue 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
- 2005 Buick Park Avenue Ultra 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:1
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Buick Park Avenue AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Buick Park Avenue cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Buick Park Avenue 3.8 V6 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Disconnect outer tie rod end from steering knuckle.
- Insert a drift or punch into brake rotor and against brake caliper in order to prevent wheel hub and bearing from turning.
- Remove and discard wheel drive shaft spindle nut that retains wheel drive shaft to hub.
- Remove stabilizer shaft link.
- Disconnect electrical connector from wheel speed sensor and reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J 42129 or equivalent onto wheel hub and...
CLICK HERE TO GET FULL ACCESS TO 2005 Buick Park Avenue DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Buick Park Avenue AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Buick Park Avenue cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Buick Park Avenue Ultra 3.8 V6 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Disconnect outer tie rod end from steering knuckle.
- Insert a drift or punch into brake rotor and against brake caliper in order to prevent wheel hub and bearing from turning.
- Remove and discard wheel drive shaft spindle nut that retains wheel drive shaft to hub.
- Remove stabilizer shaft link.
- Disconnect electrical connector from wheel speed sensor and reposition wiring harness away from ball joint.
- Disconnect lower ball joint from steering knuckle.
- Install wheel hub remover tool No. J 42129 or equivalent onto wheel hub and...
CLICK HERE TO GET FULL ACCESS TO 2005 Buick Park Avenue DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Buick Park Avenue vehicle. |
Access the Complete guide! |