Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Audi Allroad Quattro car and truck
repair procedures including Audi engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Audi Allroad Quattro automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Audi Allroad Quattro
- 2004 Audi Allroad Quattro 2.7 V6 GAS, CC:2671, Fuel Injection, Engine VIN:, Desg:D
- 2004 Audi Allroad Quattro 4.2 V8 GAS, CC:4172, Fuel Injection
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2004 Audi Allroad Quattro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2004 Audi Allroad Quattro cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2004 Audi Allroad Quattro 4.2 V8 GAS
- Disconnect battery ground cable at battery.
- If it is obstructed, remove three screws of auxiliary heater.
- Pull air duct hose off alternator.
- Remove nuts for B+ and D+ terminals from alternator.
- Release tension on drive belt and insert drift to lock in place.
- Remove drive belt from alternator.
- Remove alternator upper m...
CLICK HERE TO GET FULL ACCESS TO 2004 Audi Allroad Quattro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2004 Audi Allroad Quattro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2004 Audi Allroad Quattro cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2004 Audi Allroad Quattro 2.7 V6 GAS
- Disconnect air duct for charge air cooler from throttle valve.
- Pivot ribbed belt tensioner in clockwise direction and remove ribbed belt from alternator pulley.
- Slowly release pressure on tensioner.
- Secure viscous clutch with 5 x 60mm bolt and remove mounting bolt for viscous clutch.
- Remove viscous clutch.
- Remove alternator upper mounting bolt.
- Pivot alternator to side and remove lower mounting bolt.
- Remove wi...
CLICK HERE TO GET FULL ACCESS TO 2004 Audi Allroad Quattro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2004 Audi Allroad Quattro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2004 Audi Allroad Quattro cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2004 Audi Allroad Quattro 4.2 V8 GAS
- Disconnect battery ground cable at battery.
- Remove alternator.
- Remove engine cover.
- Completely remove intake air duct between air filter and throttle valve.
- Remove air induction ports between air filter housing and metering unit.
- Remove attachment screws from fan shroud and electric fan. Move fan to side.
- Remove coverings over strut tower and air filter housing.
- Install suitable engine support equipment.
- Unscrew fuel line from pressure regulator.
- Raise engine slightly.
- Remove lower attachment bolts from engine mounts.
- Remove...
CLICK HERE TO GET FULL ACCESS TO 2004 Audi Allroad Quattro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2004 Audi Allroad Quattro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2004 Audi Allroad Quattro cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2004 Audi Allroad Quattro 2.7 V6 GAS
- Remove noise insulation panel.
- On models with air conditioning, remove front bumper.
- Move lock carrier into service position.
- Loosen mounting bolts for air conditioning compressor belt tensioner.
- Release tension on ribbed belt and remove.
- Remove air conditioning compressor and hang on chassis with refrigerant lines attached.
- On all models, remove nut and cable from B+ terminal.
- Disconnect ...
CLICK HERE TO GET FULL ACCESS TO 2004 Audi Allroad Quattro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2004 Audi Allroad Quattro vehicle.
|
| Access the Complete guide! |
