Auto Parts Search
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Infiniti Q45 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Infiniti Q45 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2003 Infiniti Q45 4.5 V8 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and rear wheels.
- Disconnect ABS wheel sensor to prevent damage of sensor. Cover boots with shop towel to prevent damage when removing driveshaft assembly.
- Remove cotter pin and driveshaft castle nut and washer from front hub. Discard old cotter pin and install a new one.
- Remove six bolts from inside flange of driveshaft using suitable tool. Discard bolts and was...
CLICK HERE TO GET FULL ACCESS TO 2003 Infiniti Q45 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Infiniti Q45 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Infiniti Q45 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front
Vehicle: 2003 Infiniti Q45 4.5 V8 GAS
Front
- Place vehicle in neutral and release parking brake.
- Raise vehicle off ground and support it with safety stands in proper locations.
- Remove exhaust front tube and center muffler.
- Remove floor reinforcement.
- Loosen center bearing bracket nuts. Do not remove center bearing bracket nuts.
- Mark companion flange on front drive. Its recommended to use paint for refere...
CLICK HERE TO GET FULL ACCESS TO 2003 Infiniti Q45 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2003 Infiniti Q45 vehicle. |
Access the Complete guide! |