Auto Parts Search
We have info for following modifications of 2002 Oldsmobile Aurora
- 2002 Oldsmobile Aurora 4.0 V8 GAS, CID:244, Fuel Injection, Aspiration:244, Engine VIN:, Desg:C
- 2002 Oldsmobile Aurora 3.5 V6 GAS, CID:214, Fuel Injection, Aspiration:214, Engine VIN:, Desg:H
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Oldsmobile Aurora AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Oldsmobile Aurora cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2002 Oldsmobile Aurora 3.5 V6 GAS
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Loosen or remove stabilizer shaft link assembly bolt as needed.
- Remove ball joint cotter pin and nut.
- Loosen joint using ball joint separator tool No. J43828 or equivalent. The grease fitting may have to be removed from ball joint for tool access. Do not attempt to free ball stud by using a pickle fork or wedge type tool, because seal or bushing damage could result. Use proper tool to separate all ball joints.
- With pry bar between suspension support and lower control arm, separate joint.
- Remove hub nut. Insert a drift ...
CLICK HERE TO GET FULL ACCESS TO 2002 Oldsmobile Aurora DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Oldsmobile Aurora AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Oldsmobile Aurora cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2002 Oldsmobile Aurora 4.0 V8 GAS
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Loosen or remove stabilizer shaft link assembly bolt as needed.
- Remove ball joint cotter pin and nut.
- Loosen joint using ball joint separator tool No. J43828 or equivalent. The grease fitting may have to be removed from ball joint for tool access. Do not attempt to free ball stud by using a pickle fork or wedge type tool, because seal or bushing damage could result. Use proper tool to separate all ball joints.
- With pry bar between suspension support and lower control arm, separate joint.
- Remove hub nut. Insert a drift ...
CLICK HERE TO GET FULL ACCESS TO 2002 Oldsmobile Aurora DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2002 Oldsmobile Aurora vehicle. |
Access the Complete guide! |