Auto Parts Search
We have info for following modifications of 2002 Isuzu Rodeo Sport
- 2002 Isuzu Rodeo Sport 2.2 L4 GAS, CC:2180, Fuel Injection, Engine VIN:, Desg:D
- 2002 Isuzu Rodeo Sport 3.2 V6 GAS, CC:3165, Fuel Injection, Engine VIN:, Desg:W
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Isuzu Rodeo Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Isuzu Rodeo Sport cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2002 Isuzu Rodeo Sport 2.2 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove four nuts and lockwashers.
- Remove snap ring and bearing cup.
- Break retainer ring with hammer...
CLICK HERE TO GET FULL ACCESS TO 2002 Isuzu Rodeo Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Isuzu Rodeo Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Isuzu Rodeo Sport cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2002 Isuzu Rodeo Sport 3.2 V6 GAS
Front
- Place shift lever in neutral.
- Raise vehicle off ground and support it with safety stands in proper locations.
- Mark companion flange on front drive. Its recommended to use paint for reference marks. Never damage driveshaft flange and companion flange on front drive.
- Remove exhaust and transfer protectors.
- Remove bolts and then remove driveline from front final drive and transfer case.
- Reverse procedure to install noting the following:
- Torque driveline to transfer companion flange mounting bolts to 46 ...
CLICK HERE TO GET FULL ACCESS TO 2002 Isuzu Rodeo Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Isuzu Rodeo Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Isuzu Rodeo Sport cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2002 Isuzu Rodeo Sport 2.2 L4 GAS
Front
- Place shift lever in neutral.
- Raise vehicle off ground and support it with safety stands in proper locations.
- Mark companion flange on front drive. Its recommended to use paint for reference marks. Never damage driveshaft flange and companion flange on front drive.
- Remove exhaust and transfer protectors.
- Remove bolts and then remove driveline from front final drive and transfer case.
- Reverse procedure to install noting the following:
- Torque driveline to transfer companion flange mounting bolts to 46 ...
CLICK HERE TO GET FULL ACCESS TO 2002 Isuzu Rodeo Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Isuzu Rodeo Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Isuzu Rodeo Sport cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assembly -> Disassemble -> Snap Ring Type
Vehicle: 2002 Isuzu Rodeo Sport 3.2 V6 GAS
Disassemble
Snap Ring Type
This procedure describes a driveline equipped with cardan joint in tube yoke. Driveline equipped wit companion/slip yoke repeat steps to remove remaining cardan joint.
- Place driveshaft on suitable workbench. Do not damage driveshaft when servicing on workbench. Ensure driveline and components are reference marked to prevent driveline imbalance.
- Tap outside of bearing cap with a drift to loosen snap ring.
- Remove snap rings from both sides of yoke using suitable tool.
- Position yoke with grease fitting pointing up, if equipped.
- Position socket with a...
CLICK HERE TO GET FULL ACCESS TO 2002 Isuzu Rodeo Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Isuzu Rodeo Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Isuzu Rodeo Sport cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2002 Isuzu Rodeo Sport 3.2 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove four nuts and lockwashers.
- Remove snap ring and bearing cup.
- Break retainer ring with hammer...
CLICK HERE TO GET FULL ACCESS TO 2002 Isuzu Rodeo Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2002 Isuzu Rodeo Sport vehicle. |
Access the Complete guide! |