Auto Parts Search
We have info for following modifications of 2001 BMW Z3
- 2001 BMW Z3 Roadster 3.0 L6 GAS, CC:2979, Fuel Injection
- 2001 BMW Z3 Roadster 2.5 L6 GAS, CC:2494, CID:152, Fuel Injection, Aspiration:152
- 2001 BMW Z3 M Coupe 3.2 L6 GAS, CC:3246, Fuel Injection
- 2001 BMW Z3 M Roadster 3.2 L6 GAS, CC:3246, Fuel Injection
- 2001 BMW Z3 Coupe 3.0 L6 GAS, CC:2979, Fuel Injection
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2001 BMW Z3 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2001 BMW Z3 cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2001 BMW Z3 M Coupe 3.2 L6 GAS
Lower
- Drain coolant into a suitable container.
- Reposition hose clamp at radiator and remove hose.
- Reposition hose clamp at water inlet and remove hose.
- Remove hose from vehicle.
- Reverse procedure t...
CLICK HERE TO GET FULL ACCESS TO 2001 BMW Z3 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2001 BMW Z3 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2001 BMW Z3 cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2001 BMW Z3 M Roadster 3.2 L6 GAS
Lower
- Drain coolant into a suitable container.
- Reposition hose clamp at radiator and remove hose.
- Reposition hose clamp at water inlet and remove hose.
- Remove hose from vehicle.
- Reverse procedure t...
CLICK HERE TO GET FULL ACCESS TO 2001 BMW Z3 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2001 BMW Z3 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2001 BMW Z3 cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2001 BMW Z3 M Coupe 3.2 L6 GAS
- Disconnect temperature switch connector.
- Open coolant expansion tank cap and loosen vent screw.
- Raise and support vehicle, then remove front splash shield.
- Open radiator plug and drain coolant into suitable container.
- Open plug on righthand side of engine block near cylinder No. 2 and drain coolant into suitable container.
- Remove air duct.
- Lock belt pulley in position using holding tool No. 11 5 030, or equivalent, then remove water pump fan clutch mounting nut using wrench tool No. 11 5 040, or equivalent. Nut has lefthan...
CLICK HERE TO GET FULL ACCESS TO 2001 BMW Z3 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2001 BMW Z3 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2001 BMW Z3 cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2001 BMW Z3 M Roadster 3.2 L6 GAS
Inlet
- Drain coolant into a suitable container.
- Reposition hose clamp at heater core and remove hose.
- Reposition hose clamp at heater control valve and remove hose.
- Remove hose from vehicle.
- Reverse procedure ...
CLICK HERE TO GET FULL ACCESS TO 2001 BMW Z3 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2001 BMW Z3 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2001 BMW Z3 cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2001 BMW Z3 M Coupe 3.2 L6 GAS
Inlet
- Drain coolant into a suitable container.
- Reposition hose clamp at heater core and remove hose.
- Reposition hose clamp at heater control valve and remove hose.
- Remove hose from vehicle.
- Reverse procedure ...
CLICK HERE TO GET FULL ACCESS TO 2001 BMW Z3 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2001 BMW Z3 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2001 BMW Z3 cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2001 BMW Z3 Roadster 3.0 L6 GAS
- Disconnect temperature switch connector.
- Open coolant expansion tank cap and loosen vent screw.
- Raise and support vehicle, then remove front splash shield.
- Open radiator plug and drain coolant into suitable container.
- Open plug on righthand side of engine block near cylinder No. 2 and drain coolant into suitable container.
- Remove air duct.
- Lock belt pulley in position using holding tool No. 11 5 030, or equivalent, then remove water pump fan clutch mounting nut using wrench tool No. 11 5 040, or equivalent. Nut has lefthan...
CLICK HERE TO GET FULL ACCESS TO 2001 BMW Z3 RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2001 BMW Z3 vehicle. |
Access the Complete guide! |