Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

2000 Oldsmobile Intrigue CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Oldsmobile REPAIR SHOPS DON'T WANT YOU TO KNOW

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

    Automotive Domain Names

    Help me findSearch

    Select Section

    Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Oldsmobile Intrigue car and truck repair procedures including Oldsmobile engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your Oldsmobile Intrigue automobile. Try the Automotix DIY solution today!
    DIY REPAIR SAMPLES > CONTINUE EXPLORING >
    Using the Automotix DIY repair procedures will save you hundreds and even thousands of dollars! In addition, it will save you hours of touring the city searching for Oldsmobile mechanics you can trust. The Automotix DIY solution is particularly affordable. A full access to the entire DIY repair procedures and diagrams for your 2000 Oldsmobile Intrigue vehicle will cost less than a single gallon of gas. Here are some of the DIY repair tips and procedures you will find here:

    A/C & HEATER SERVICE PROCEDURES FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    Computer Relearn Procedures -> General Motors Corp. -> 1997-98 -> 1998-2000 -> 1998-99 -> 1999-2001 -> 1999-2002 -> 2.2L & 2.4L Engines -> 2000-02 -> 2000-04 -> 2001-02 -> 2001-04 -> 3.1L, 3.4L, 3800/3.8L, 4.0L & 4.6L Engines -> 3.5L Engine -> 5.7L Engine -> Achieva, Alero, Grand Am & Skylark -> Achieva, Cavalier, Skylark & Sunfire -> Alero & Grand Am -> Alero & Malibu -> Aurora -> Aurora, Bonneville, DeVille, LeSabre & Seville -> Aurora, Bonneville, Grand Prix, LeSabre & Park Avenue -> Auto Learn Passlock Procedure -> Body Control Module (BCM) -> Bonneville -> Bonneville, Eighty Eight, LeSabre, LSS & Park Avenue -> C & K Series w/Diesel Engine -> C & K Trucks w/Diesel Engine -> Camaro & Firebird -> Catera -> Cavalier & Sunfire -> Century -> Century, Grand Prix, Impala, Intrigue, Lumina, Monte Carlo & Regal -> Century, Impala, Intrigue, Monte Carlo & Regal -> Corvette -> Crankshaft Position System Variation Learn -> Cutlass & Malibu -> Dash Integration Module (DIM) -> DeVille -> DeVille, Eldorado & Seville -> EEPROM -> Eldorado -> Engine Control Module (ECM) -> Engine Performance -> Except Park Avenue -> Grand Am -> Grand Prix & Regal -> Impala & Monte Carlo -> Instrument Panel Integration Module (IPM) -> Intrigue -> LeSabre -> Less Tech 2 Or Techline Terminal -> Light Truck & Vans -> Park Avenue -> Passenger Cars -> Passkey Module -> Passlock Learn Procedure -> PCM -> Powertrain Control Module (PCM) -> Powertrain Control Module (PCM) & Vehicle Control Module (VCM) -> Rear Integration Module -> Riviera -> Seville -> T50/T60/T20+ -> TDC Offset Adjustment -> Theft Deterrent System Programming -> VCM -> With Tech 2 -> With Techline Terminal & Scan Tool
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    Passenger Cars

    Body Control Module (BCM)
    Alero & Grand Am

    This procedure must be performed if the BCM, Passlock sensor or PCM is replaced. If BCM is not properly programmed, it will not control all the features properly.

    • Ensure battery is fully charged and ignition switch is in the ON position.
    • Connect a suitably programmed Tech II, or equivalent, scan tool to Data Link Connector (DLC).
    • Access scan tool "Special Functions" menu and follow scan tool instructions to program BCM.
    • If BCM fails to accept the pr...

    CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue A/C & HEATER SERVICE PROCEDURES

    BRAKE SERVICE PROCEDURES FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    Hydraulic Brake Systems -> General Motors -> Brake System Bleed -> Bleed Sequence -> Hydraulic System Flush -> Manual -> Pressure
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    Manual

    Pressure bleeding is recommended for all hydraulic systems. However, if a pressure bleeder is unavailable, use the following procedure. Brake fluid damages painted surfaces. Immediately clean any spilled fluid.

    • Remove vacuum reserve by pumping brakes several times with engine off.
    • Fill master cylinder reservoir with clean brake fluid. Do not let reservoir fall below half full during bleeding procedure.
    • If required, bleed master cylinder as follows:
      • Loosen master cylinder forward brake line connection until fluid flows from reservoir, then tighten brake line.
      • Have assistant t...

    CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue BRAKE SERVICE PROCEDURES

    FUEL FILTER REPLACEMENT PROCEDURES FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    General Motors Corp./Saturn Passenger Cars -> Fuel Pressure Relief -> Except Aveo, LaCrosse, LeMans (1988-93), Malibu & Malibu Maxx (2004-05), Metro, Nova, Prizm, Spectrum & Storm -> Engine Fuel Pressure Service Port -> Engines Less Fuel Pressure Service Port
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.

    Prior to disconnecting fuel lines, the fuel system pressure must be relieved to prevent accidental spray of fuel.

    After the battery has been disconnected and reconnected, some abnormal driveability symptoms may occur. The vehicle may need to be driven while the vehicle relearns its adaptive strateg...

    CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue FUEL FILTER REPLACEMENT PROCEDURES

    DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    CV AXLE SHAFT, Replace
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    • Raise and suitably support vehicle.
    • Remove wheel and tire.
    • Remove stabilizer shaft link.
    • Remove front wheel drive shaft nut. Insert a drift or a flat-bladed tool into caliper and rotor to prevent rotor from turning.
    • Disconnect outer tie rod assembly from steering knuckle.
    • Separate ball joint from steering knuckle. Do not attempt to move vehicle with drive axle(s) removed from wheel bearing. Wheel(s) could fall off, dropping vehicle to ground and causing personal injury or damage to vehicle.
    • Separate front wheel drive axle from front wheel drive shaft bearing using a suitable pu...

    CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

    STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    Starter, Replace
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    • Disconnect battery ground cable.
    • Raise and support vehicle.
    • Disconnect starter motor electrical connectors.
    • Remove torque converter c...

    CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue STARTER & ALTERNATOR REPLACEMENT PROCEDURES

    CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    Cabin Air Filter Service -> General Motors Corp./Saturn -> 1997-2005 Century, Regal, 1998-2002 Intrigue & 2000-05 Impala & Monte Carlo
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    Under normal operating conditions the cabin air filter should be replaced every 15,000 miles. In dusty areas change the cabin air filter more often.

    • Place the windshield wipers in the up position by turning the ignition switch Off when the wipers reach the desired position.
    • Open the hood.
    • Lift the righthand side of the rear hood seal from the flange in the area of the rig...

    CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES

    MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    General Motors Corp./Saturn Cars -> Low Washer Fluid Indicator ->
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    The windshield washer solvent tank has a switch that closes when the wash...

    CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue MAINTENANCE LAMP RESET PROCEDURES

    RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    Radiator, Replace
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    • Drain coolant into suitable container, then remove engine mount strut.
    • Remove engine mount strut bracket from upper radiator support, then disconnect cooling fan electrical connector.
    • Disconnect hoses from radiator, ...

    CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue RADIATOR & HOSE REPLACEMENT PROCEDURES

    SERPENTINE BELT SERVICE PROCEDURES FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    Serpentine Drive Belt, Replace
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    • Lift or rotate tensioner using a 1/2 i...

    CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue SERPENTINE BELT SERVICE PROCEDURES

    COMPONENT LOCATION DIAGRAMS FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    Component location diagrams for most 2000 Oldsmobile Intrigue cars and light trucks sold in the U.S. from 1990+.

    LH A-Pillar Harness Diagram for 2000 Oldsmobile Intrigue  3.5 V6 GASLH A-Pillar Harness Diagram for 2000 Oldsmobile Intrigue 3.5 V6 GAS

    Components on diagram:
  • Connector C-301
  • Main Body To Left Hand Front Door
  • Seat Belt Components Diagram for 2000 Oldsmobile Intrigue  3.5 V6 GASSeat Belt Components Diagram for 2000 Oldsmobile Intrigue 3.5 V6 GAS

    Components on diagram:
  • Seat Adjuster Switch
  • Seat
  • Seat Belt Buckle
  • Driver Side Seat Belt Switch
  • Seat Adjuster Motor Assembly
  • CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue PARTS/COMPONENTS LOCATION DIAGRAMS!

    WIRING DIAGRAMS FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    OEM drawn wiring diagrams for most 2000 Oldsmobile Intrigue cars and light trucks sold in the U.S.

    2000 Oldsmobile Intrigue  3.5 V6 GAS Wiring Diagram2000 Oldsmobile Intrigue 3.5 V6 GAS Wiring Diagram

    Components on diagram:
  • Electronic Brake Control Module
  • Stoplamp Switch
  • Magnasteer Actuator
  • 2000 Oldsmobile Intrigue  3.5 V6 GAS Wiring Diagram2000 Oldsmobile Intrigue 3.5 V6 GAS Wiring Diagram

    Components on diagram:
  • Fuse Panel
  • CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue WIRING DIAGRAMS!

    TECHNICAL SERVICE BULLETINS FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    OEM TSB listings for most 2000 Oldsmobile Intrigue cars and light trucks sold in the U.S. from 1985+.

    Document: Revised General Motors New Vehicle Tire Warranty Program
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    Auto Systems:
  • Labor Times, Manuals, Warranty, Aids
  • Wheels, Tires, Wheel Bearings, Seals, Hubs
  • Document: New Website for AFIT, TPM, and VDR Updates
    Vehicle: 2000 Oldsmobile Intrigue 3.5 V6 GAS

    Auto Systems:
  • Labor Times, Manuals, Warranty, Aids
  • CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue TECHNICAL SERVICE BULLETINS!

    COMPONENT/PARTS SPECIFICATIONS FOR 2000 Oldsmobile Intrigue AUTOMOBILES

    BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2000 Oldsmobile Intrigue cars and light trucks sold in the U.S. and Canada from 1970+.

    • Brake caliper mounting bolt torque
    • Brake drum runout, machining, & discard specs
    • Minimum brake lining thickness.
    • Brake rotor runout, parallelism, machining, discard, & finish specs

    A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2000 Oldsmobile Intrigue cars and light trucks sold in the U.S. and Canada from 1980+.

    • Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap

    COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.

    PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules

    QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2000 Oldsmobile Intrigue cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.

    • Automatic transmission/transaxles capacities, lubricant recommendations
    • Differential/final drive capacities, lube recommendations, grades, & viscosities
    • Final drive fill & drain plug torques
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
    • Severe service maintenance & interval recommendations
    • Tire sizes, wheel nut/bolt torque, pressures & rim sizes
    • Transfer case capacities, lube recommendations, grades, & viscosities

    TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2000 Oldsmobile Intrigue cars and light trucks sold in the U.S. and Canada from 1980+

    • Airflow sensor electrical specifications
    • Tensioning specifications for systems with automatic tensioners
    • Barometric pressure sensor specs
    • Battery group number and cranking performance
    • Crankshaft & camshaft position sensor resistance
    • Engine compression pressures
    • Coolant temperature sensor specs
    • Computer advance.
    • Diesel fuel temperature sensor resistance.
    • Distributor advance specifications
    • Ignition pickup coil resistance
    • Exhaust gas recirculation temperature sensor resistance
    • Engine fastener torque values
    • Firing order diagrams
    • Fuel system pressures
    • Generator (alternator) specs
    • Intake air temperature sensor specs
    • Ignition coil specifications
    • Fuel injector resistance
    • Engine idle speeds
    • Knock sensor resistance
    • Manifold absolute pressure sensor specs
    • Mixture control solenoid resistance
    • Voltage regulator specs
    • Spark plug applications & gaps
    • Starter motor electrical specs.
    • Tensioning specifications for systems without automatic tensioners
    • Throttle body temperature sensor resistance
    • Ignition timing in degrees at rpm
    • Transmission oil temperature sensor resistance
    • Throttle position sensor specs
    • Vacuum sensor valve specs

    CLICK HERE TO GET FULL ACCESS TO 2000 Oldsmobile Intrigue SPECIFICATIONS DATA!

    Shop online for auto body parts, engines, wheels, lights...

    Click here to view more details about 1998 Oldsmobile Intrigue Fender, Front, Driver Side1998 Oldsmobile Intrigue Fender, Front, Driver Side, With side molding holes; CAPA certified; Made from tough impact-resistant steel; Designed to match OE quality, durability, fit, and finish..

    Source: Auto Body Parts Store

    $128.29

    Click here to view more details2002 Oldsmobile Intrigue Bumper Bracket, Front, Driver Side, A high quality, OE replacement bumper reinforcement bracket; With 2 years limited TrustBuilt warranty..

    Source: Auto Body Parts Store

    $10.88

    Click here to view more details about 2002 Oldsmobile Intrigue Wheel Center Cap2002 Oldsmobile Intrigue Wheel Center Cap, WHEEL CENTER CAP , , .

    Source: Wheels / Rims, Mirrors & Lights Store

    $23.50

    Click here to view more details1999 Oldsmobile Intrigue V6, 3.8 L, 231 CID Rebuilt Engine, Warranty: 3-Year/100,000 Mile, .

    Source: Rebuilt Engines Store

    $1,842.00

    Click here to view more details1998 Oldsmobile Intrigue Used Exhaust Manifold, Passenger Side Rear, 6-231 (3.8L), R. (), Very Good.

    Source: Used Auto Parts Store

    $139.00

    Click here to view more details1998 Oldsmobile Intrigue Used Rear Vent Window, Passenger Side, R., Good.

    Source: Used Auto Parts Store

    $80.00
    More parts
    Help me findSearch
    Auto Repair Quick Search
    Help me find
    Search DIY repair manuals by VIN...
    Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

    Find out what info we have for your vehicle

    Get the Complete Technical Service Bulletins!
    Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Oldsmobile Intrigue vehicle.
    Access the Complete guide!
    Need To Fix Your Car or Truck?
    Save Money With Free Car Insurance Quote
    FREE car insurance quote
    Enter Zip Code:
    GOT A WEBSITE?Make money with Automotix

    Make money with Automotix Partner Program.

    Learn more

    Auto Repair Quick Search
    Help me find