Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Audi S4 car and truck
repair procedures including Audi engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Audi S4 automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2000 Audi S4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Audi S4 cars and light trucks from 1990+.
Anti-lock Brakes -> System Coding -> TT
Vehicle: 2000 Audi S4 2.7 V6 GAS
TT
Refer to Fig. fo...
CLICK HERE TO GET FULL ACCESS TO 2000 Audi S4 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Audi S4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Audi S4 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed
Vehicle: 2000 Audi S4 2.7 V6 GAS
The following procedure has been modified by a Technical Service Bulletin.
To bleed brake system, use a catch bottle with a transparent hose attached so brake fluid can be inspected for air bubbles.
- Connect brake pressure bleeding tool No. VAG 1869, or equivalent, per tool manufacturer's instructions.
- Bleed brakes in following sequence:
- Righ...
CLICK HERE TO GET FULL ACCESS TO 2000 Audi S4 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Audi S4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Audi S4 cars and light trucks from 1990+.
Disc Brakes -> Dual Piston Front Brakes -> Brake Pad Service -> Cabriolet -> Installation -> Removal -> S6
Vehicle: 2000 Audi S4 2.7 V6 GAS
S6
Removal
- Raise and support vehicle, then remove wheel assemblies.
- If brake pads are to be used again, mark installed positions for installation reference.
- Secure brake disc on wheel hub with a wheel lug nut.
- Remove outer brake pad mounting bolts, Fig. .
- Extract part of brake fluid from reservoir using a suitable bleeder bottle, then push piston back into caliper housing by inserting a suitable screwdriver into floating frame and pressing firmly to outside.
- Disconnect wiring harness electrical connector, then remove brake pad wear indicator wiring from brake caliper bracket.
- Press c...
CLICK HERE TO GET FULL ACCESS TO 2000 Audi S4 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Audi S4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Audi S4 cars and light trucks from 1990+.
Disc Brakes -> Single Piston Rear Disc Brakes -> Adjustments -> A4 & S4 -> A6, S6 & Cabriolet -> A8 -> Parking Brake -> Rear Brake Basic Setting, Inspection -> TT
Vehicle: 2000 Audi S4 2.7 V6 GAS
Rear Brake Basic Setting, Inspection
Parking brake cable must be free of tension during basic setting inspection.
- Push caliper lever against stop on both sides of vehicle using a suitable screwdriver. Parking brake cable is too tight if lever of opposite side caliper is pulled away from stop.
- If required, loosen adjustment nut for parking brake cable until both levers rest against stop.
- Push a suitable screwdriver between end of rear spring and roller.
- Press brake pedal once, then ensure both tires rotate freely.
- Remove screwdriver.
Parking Brake
A4 & S4
Always perform rear brake basic setti...
CLICK HERE TO GET FULL ACCESS TO 2000 Audi S4 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Audi S4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Audi S4 cars and light trucks from 1990+.
Disc Brakes -> Single Piston Rear Disc Brakes -> Tightening Specifications
Vehicle: 2000 Audi S4 2.7 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2000 Audi S4 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Audi S4 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Audi S4 cars and light trucks from 1990+.
Disc Brakes -> Single Piston Rear Disc Brakes -> Caliper Service -> Overhaul
Vehicle: 2000 Audi S4 2.7 V6 GAS
Overhaul
Refer to Fig. when servicing front disc brake calipers, noting the following:
- Remove piston from caliper housing using replacement tool No. 3272, or equivalent, Fig. .
- Remove caliper piston seal using a suitable screwdriver, Fig. .
- Install piston as follows:
- Install protective cap with sealing lip onto piston, Fig. .
- Insert inner sealing lip of protective cap into groove in brake caliper housing using a suitable screwdriver, F...
CLICK HERE TO GET FULL ACCESS TO 2000 Audi S4 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 Audi S4 vehicle.
|
| Access the Complete guide! |
