Auto Parts Search
1999 Buick Park Avenue CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Buick REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- A/C & Heater Service
- Brake Service
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
A/C & HEATER SERVICE PROCEDURES FOR 1999 Buick Park Avenue AUTOMOBILES
General Service Domestic Vehicles -> 1998-2000 -> Precautions -> A/C Refrigerant Oil -> Battery Ground Cable -> Cleanliness -> Engine Coolant -> Exercise System -> General Service -> Product Compatibility -> R-134a -> Safety
Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS
Battery Ground Cable
Prior to service disconnect battery ground cable and isolate as required.
Product Compatibility
A/C Refrigerant Oil
Before replenishing refrigerant oil, ensure product compatibility with the system being serviced. Refer to "A/C Data" for specifications.
Engine Coolant
Before adding or replacing engine coolant, ensure product compatibility with the system being serviced. If using orange silicate-free coolant, do not mix with green silicated coolant. If mixed, premature engine, heater core or radiator corrosion may result.
...CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Buick Park Avenue AUTOMOBILES
Disc Brakes -> AC-Delco Single Piston Front Disc Brake -> Precautions
Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS
- Grease or any other foreign material must be kept off brake linings, caliper, surfaces of disc and external surfaces of hub during service procedures.
- Handling brake disc and caliper should be done in a way to avoid deformation of disc and nicking or scratching brake linings.
- If inspection reveals worn or damaged rubber piston seals, they should be replaced.
- During removal and installation of a wheel assembly, ensure not to interfere with or damage c...
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR 1999 Buick Park Avenue AUTOMOBILES
General Motors Corp./Saturn Passenger Cars -> Fuel Filter Scheduled Maintenance -> 1980-06 Gasoline Engine Models Except Catera, LeMans (1988-93) Metro, Nova (1985-88), Saturn & Sprint -> Normal Service -> Severe Service
Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Buick Park Avenue AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Disconnect outer tie rod end from steering knuckle. Do NOT loosen tie rod end jam nut.
- Insert a drift or punch into brake rotor and against brake caliper in order to prevent wheel hub and bearing from turning.
- Remove and discard wheel drive shaft spindle nut retaining wheel drive shaft to hub.
- Remove stabilizer shaft link.
- Disconnect electrical connector from wheel speed sensor and reposition wiring harness away from ball joint.Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after dis...
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 1999 Buick Park Avenue AUTOMOBILES
Reset Procedures
Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS
- Inflate all tires to vehicle manufacturers specifications.
- Place ignition switch in the On position.
- Press ...
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1999 Buick Park Avenue AUTOMOBILES
Starter, Replace
Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS
When removing starter, note if any shims are used between starter and mounting surface. If shims are used, install in their original locations.
If starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to outer bolt. If starter makes a high pitched whine after engine starts, add .015 inch double shims until noise ceases.
- Disconn...
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 1999 Buick Park Avenue AUTOMOBILES
Cabin Air Filter Service -> General Motors Corp./Saturn -> 1998-99 Park Avenue
Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS
Under normal operating conditions the cabin air filter should be replaced every 15,000 miles. In dusty areas change the cabin air filter more often.
- Place the ignition switch in the Off position, then remove the SIR (Supplemental Inflatable Restraint) fuse from the underhood fuse panel.
- Remove the lefthand sound insulator fasteners, Fig. . Note the location of the lefthand sound insulator fasteners so they can be installed at the same positions. Improper installation of the fasteners may result in brake or accelerator pedal binding. SIR system wiring and components are l...
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1999 Buick Park Avenue AUTOMOBILES
General Motors Corp./Saturn Cars -> Check Gauge Warning Lamp ->
Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS
The Check Gauge warning lamp will light to warn the driver to inspect the oil pressure gauge, engine coolant temperature ga...
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1999 Buick Park Avenue AUTOMOBILES
Radiator, Replace
Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS
- Drain engine coolant into suitable container.
- Remove upper fan mounting bolts.
- Remove upper radiator panel.
- Remove coolant hoses from radiator and coolant recovery tank ho...
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1999 Buick Park Avenue AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS
- Rotate tensioner counterclockwise to remove the dri...
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 1999 Buick Park Avenue AUTOMOBILES
Component location diagrams for most 1999 Buick Park Avenue cars and light trucks sold in the U.S. from 1990+.
RH Fender Components Diagram for 1999 Buick Park Avenue 3.8 V6 GAS Components on diagram: |
Trunk Components Diagram for 1999 Buick Park Avenue 3.8 V6 GAS Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 1999 Buick Park Avenue AUTOMOBILES
OEM drawn wiring diagrams for most 1999 Buick Park Avenue cars and light trucks sold in the U.S.
1999 Buick Park Avenue 3.8 V6 GAS Wiring Diagram Components on diagram: |
1999 Buick Park Avenue 3.8 V6 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 1999 Buick Park Avenue AUTOMOBILES
OEM TSB listings for most 1999 Buick Park Avenue cars and light trucks sold in the U.S. from 1985+.
Document: Revised General Motors New Vehicle Tire Warranty Program Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS Auto Systems: |
Document: New Website for AFIT, TPM, and VDR Updates Vehicle: 1999 Buick Park Avenue 3.8 V6 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 1999 Buick Park Avenue AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1999 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1999 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1999 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1999 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 1999 Buick Park Avenue SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1999 Buick Park Avenue vehicle. |
Access the Complete guide! |