Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Audi A4 Quattro car and truck
repair procedures including Audi engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Audi A4 Quattro automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Audi A4 Quattro
- 1999 Audi A4 Quattro 1.8 L4 GAS, CC:1781, Fuel Injection, Engine VIN:, Desg:B
- 1999 Audi A4 Quattro 2.8 V6 GAS, CC:2771, Fuel Injection, Engine VIN:, Desg:D
- 1999 Audi A4 Quattro Avant 2.8 V6 GAS, CC:2771, Fuel Injection, Engine VIN:, Desg:D
- 1999 Audi A4 Quattro Avant 1.8 L4 GAS, CC:1781, Fuel Injection, Engine VIN:, Desg:B
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Audi A4 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Audi A4 Quattro cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1999 Audi A4 Quattro Avant 1.8 L4 GAS
- Remove cap from wheel using a suitable removal tool then loosen lug nuts.
- Remove axle bolt and washer Fig. . Remove and install axle bolt only with tires on ground. Do not move vehicle without driveshaft or outer constant velocity joint installed.
- Raise and support vehicle, then remove wheel.
- Pull speed sensor out of axle housing slightly.
- Loosen but do not remove lower control arm bolts at subframe.
- Remove lower strut bolt from lower control arm.
- Remove bolts from driveshaft flange at transaxle.
- Remove lower mounting bolt for strut.
- Remove bolts retaining knuckle to upper control a...
CLICK HERE TO GET FULL ACCESS TO 1999 Audi A4 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Audi A4 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Audi A4 Quattro cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1999 Audi A4 Quattro Avant 2.8 V6 GAS
- Remove cap from wheel using a suitable removal tool then loosen lug nuts.
- Remove axle bolt and washer Fig. . Remove and install axle bolt only with tires on ground. Do not move vehicle without driveshaft or outer constant velocity joint installed.
- Raise and support vehicle, then remove wheel.
- Pull speed sensor out of axle housing slightly.
- Loosen but do not remove lower control arm bolts at subframe.
- Remove lower strut bolt from lower control arm.
- Remove bolts from driveshaft flange at transaxle.
- Remove lower mounting bolt for strut.
- Remove bolts retaining knuckle to upper control a...
CLICK HERE TO GET FULL ACCESS TO 1999 Audi A4 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Audi A4 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Audi A4 Quattro cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1999 Audi A4 Quattro 1.8 L4 GAS
- Remove cap from wheel using a suitable removal tool then loosen lug nuts.
- Remove axle bolt and washer Fig. . Remove and install axle bolt only with tires on ground. Do not move vehicle without driveshaft or outer constant velocity joint installed.
- Raise and support vehicle, then remove wheel.
- Pull speed sensor out of axle housing slightly.
- Loosen but do not remove lower control arm bolts at subframe.
- Remove lower strut bolt from lower control arm.
- Remove bolts from driveshaft flange at transaxle.
- Remove lower mounting bolt for strut.
- Remove bolts retaining knuckle to upper control a...
CLICK HERE TO GET FULL ACCESS TO 1999 Audi A4 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Audi A4 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Audi A4 Quattro cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1999 Audi A4 Quattro 2.8 V6 GAS
- Remove cap from wheel using a suitable removal tool then loosen lug nuts.
- Remove axle bolt and washer Fig. . Remove and install axle bolt only with tires on ground. Do not move vehicle without driveshaft or outer constant velocity joint installed.
- Raise and support vehicle, then remove wheel.
- Pull speed sensor out of axle housing slightly.
- Loosen but do not remove lower control arm bolts at subframe.
- Remove lower strut bolt from lower control arm.
- Remove bolts from driveshaft flange at transaxle.
- Remove lower mounting bolt for strut.
- Remove bolts retaining knuckle to upper control a...
CLICK HERE TO GET FULL ACCESS TO 1999 Audi A4 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Audi A4 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Audi A4 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1999 Audi A4 Quattro 1.8 L4 GAS
- Remove wheel cover, then drive axle bolt in hub.
- Raise and support vehicle, then remove tires.
- Remove drive axle mounting bolts.
- Remove cable for ABS wheel speed sensor from bracket at brake caliper, then pull ABS wheel speed sensor slightly out of swing ar...
CLICK HERE TO GET FULL ACCESS TO 1999 Audi A4 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Audi A4 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Audi A4 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1999 Audi A4 Quattro Avant 1.8 L4 GAS
- Remove wheel cover, then drive axle bolt in hub.
- Raise and support vehicle, then remove tires.
- Remove drive axle mounting bolts.
- Remove cable for ABS wheel speed sensor from bracket at brake caliper, then pull ABS wheel speed sensor slightly out of swing ar...
CLICK HERE TO GET FULL ACCESS TO 1999 Audi A4 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1999 Audi A4 Quattro vehicle.
|
| Access the Complete guide! |
