Auto Parts Search
We have info for following modifications of 1998 Plymouth Breeze
- 1998 Plymouth Breeze 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 1998 Plymouth Breeze 2.0 L4 GAS, CC:1996, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Breeze cars and light trucks from 1990+.
Anti-Lock Brakes -> Type 4-Teves Mark 20 Anti-Lock Braking System -> Troubleshooting
Vehicle: 1998 Plymouth Breeze 2.0 L4 GAS
Refer to flowcharts under "Diagnosis & T... "
CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Breeze BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Breeze cars and light trucks from 1990+.
Drum Brakes -> Type 1: Kelsey-Hayes & Varga Leading-Trailing Drum Brakes -> Adjustments -> Breeze, Cirrus & Stratus -> Concord, Intrepid, LHS, Neon, Sebring Convertible & Vision -> Except Breeze, Cirrus & Stratus -> Parking Brake -> Service Brake
Vehicle: 1998 Plymouth Breeze 2.0 L4 GAS
Service Brake
Breeze, Cirrus & Stratus
These vehicles are equipped with a fully automatic adjustment mechanism. In the event of brake shoe replacement the following initial adjustment procedure must be completed prior to driving the vehicle.
- Ensure parking brake lever is fully released.
- Depress brake pedal as far as possible 2-3 times. This will cause automatic adjuster to correctly adjust rear brakes.
- Apply and release park brake lever one time after service brakes have been adjusted.
Except Breeze, Cirrus & Stratus
- Raise and support vehicle.
- Remove brake adjusting hole plug from rear brak...
CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Breeze BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Breeze cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting -> Decreasing Brake Pedal Travel -> Dragging Brakes -> Hard Brake Pedal
Vehicle: 1998 Plymouth Breeze 2.0 L4 GAS
Decreasing Brake Pedal Travel
If a decreasing brake pedal is encountered, the power brake unit may be binding internally. To test the power brake unit for this condition proceed as follows:
- Place transmission shift lever into Neutral and start engine.
- Increase engine speed to approximately 1500 RPM, close throttle and completely depress brake pedal.
- Slowly release brake pedal and stop engine.
- Remove vacuum check valve and hose from power brake unit. Observe for backward movement of brake pedal.
- If brake pedal moves backward, power brake unit has internal binding. Replace power brake u...
CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Breeze BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Breeze cars and light trucks from 1990+.
Power Brake Units -> General Service -> Brake booster operation test -> Check valve operation test
Vehicle: 1998 Plymouth Breeze 2.0 L4 GAS
In order to properly service and repair available brake systems, a thorough understanding of the power assist systems is necessary. The vacuum assist diaphragm assembly multiplies the force exerted on the master cylinder piston in order to increase the hydraulic pressure delivered to the wheel cylinders or calipers while decreasing the effort necessary to obtain acceptable stopping performance.
Vacuum assist units get their energy by opposing engine vacuum to atmospheric pressure. A piston, cylinder and flexible diaphragm utilize this energy to provide brake assistance. The diaph...
CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Breeze BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Breeze cars and light trucks from 1990+.
Disc Brakes -> Type 3-Allied Signal Dual Pin Floating Caliper Disc Brake, Front -> Brake Pad Service
Vehicle: 1998 Plymouth Breeze 2.0 L4 GAS
- Raise and support vehicle, then remove front wheel and tire assembly.
- Remove caliper to steering knuckle attaching bolts.
- Remove caliper from steering knuckle by rotating free end of caliper away from steering knuckle, then slide opposite end of caliper out from under machined abutment on steering knuckle. Support caliper on upper control arm. Do not allow it to hang on flex hose.
- Remove front brake rotor, then the outboard pad by prying the pad retaining clip over raised area on caliper, Fig. .
- Pull inboard brake pad away from piston until retaining clip is free from cavity in pi...
CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Breeze BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Breeze cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> Pushrod Adjustment
Vehicle: 1998 Plymouth Breeze 2.0 L4 GAS
Pushrod Adjustment
Refer to "Adjustments" in " Hy... "
CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Breeze BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Plymouth Breeze vehicle. |
Access the Complete guide! |