Auto Parts Search
We have info for following modifications of 1998 Honda Civic
- 1998 Honda Civic CX 1.6 L4 GAS, CC:1590, Fuel Injection
- 1998 Honda Civic DX 1.6 L4 GAS, CC:1590, Fuel Injection
- 1998 Honda Civic EX 1.6 L4 GAS, CC:1590, Fuel Injection
- 1998 Honda Civic HX 1.6 L4 GAS, CC:1590, Fuel Injection
- 1998 Honda Civic LX 1.6 L4 GAS, CC:1590, Fuel Injection
- 1998 Honda Civic GX 1.6 L4 CNG, CC:1590, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1998 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Civic cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> Pushrod Clearance -> Pushrod Length
Vehicle: 1998 Honda Civic CX 1.6 L4 GAS
Pushrod Clearance
Master cylinder pushrod-to-piston clearance must be checked and adjusted before installing master cylinder.
- Using pushrod adjustment gauge tool No. 07JAG-SD40100, or equivalent, adjust bolt so top of it is flush with end of master cylinder piston, Fig. .
- Install master cylinder rod seal between pushrod bolt adjustment gauge and brake booster.
- Without disturbing position of adjusting bolts, install gauge upside down on booster and torque nuts to 11 ft. lbs.
- Connect booster in line with a vacuum gauge, and maintain an engine speed that will deliver 20 inches of vacuum. Th...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Civic BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Civic cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1997 -> 1997 Accord -> 1997-2000 -> 1997-2000 Civic -> 1997-2001 -> 1997-2001 CR-V -> 1997-98 -> 1997-98 Odyssey -> 1998-2002 -> 1998-2002 Accord -> 1999-2002 -> 1999-2002 Odyssey -> 2001-02 -> 2001-02 Civic -> 2002 -> 2002 CR-V -> Accessing Diagnostic Trouble Codes -> Accord -> Accord & Odyssey -> Accord & S2000 -> Civic -> Clearing Diagnostic Trouble Codes -> CR-V -> del Sol -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Function Test -> Modulator Function Inspection -> Odyssey -> Prelude -> S2000 -> Solenoid Leak Test -> System Tests -> Wheel Sensor Signal Confirmation -> Wiring Diagrams
Vehicle: 1998 Honda Civic LX 1.6 L4 GAS
Accessing Diagnostic Trouble Codes
Accord
1997
- Connect SCS service connector to service check connector under glove compartment, Fig. .
- Turn ignition switch on, but do not start engine.
- Record blinking frequency of ABS indicator light. Blinking frequency indicates diagnostic trouble code. Memory of diagnostic trouble code is erased if connector is disconnected from ABS control unit.
1998-2002
- Connect PGM tester to 16-pin DLC located behind driver's side kick panel with ignition switch off.
- Select "SCS" on the display, then press "Yes" at "Service Check Signal" mode.
- Turn ignition switch to...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Civic BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Civic cars and light trucks from 1990+.
Power Brake Units -> Description
Vehicle: 1998 Honda Civic DX 1.6 L4 GAS
The vacuum assist diaphragm assembly multiplies the force exerted on the master cylinder piston in order to increase the hydraulic pressure delivered to the wheel cylinders. The assembly also decreases the effort necessary to obtain acceptable stopping performance. Vacuum assist units get their energ...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Civic BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Civic cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Front -> Installation -> Rear -> Removal
Vehicle: 1998 Honda Civic DX 1.6 L4 GAS
Front
Removal
- Refer to Figs. through when replacing brake pads.
- Raise and support front of vehicle, then remove wheel and tire assemblies.
- Remove brake hose clamp bolts from steering knuckle, Fig. .
- Remove caliper bolt, then swing caliper up out of the way.
- Remove shims, retainers and brake pads.
Installation
- Using vernier caliper, measure thickness of each pad lining. Compare measurement with specifications. If brake lining thickness is less than specified, replace both pads as a set.
- Clean caliper thoroughly, and check for grooves or cracks. Repair or replace as necessary.
- Install ...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Civic BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Civic cars and light trucks from 1990+.
Drum Brakes -> Parking Drum Brake Shoe, Replace -> CR-V & Odyssey
Vehicle: 1998 Honda Civic LX 1.6 L4 GAS
CR-V & Odyssey
- Raise and support vehicle, then remove rear wheels.
- Release parking brake, then remove rear brake caliper and brake disc/drum as outlined under "Disc Brakes."
- Disconnect and remove upper return springs, Figs. and .
- Remove retainers and tension pins.
- Disconnect rod spring and remove connecting rod.
- Remove lower return spring, adjuster assembly and forward brake shoe.
- Disconnect parking brake cable from parking brake lever, then remove rear br...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Civic BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Civic cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder, Replace
Vehicle: 1998 Honda Civic DX 1.6 L4 GAS
Master Cylinder, Replace
- Remove master cylinder reservoir cap, then suck fluid from reservoir with a suitable syringe.
- Disconnect brake lines from master cylinder, then all necessary electrical connectors.
- Remove master cylinder to brake booster retaining nuts.
- Remov...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Civic BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Honda Civic vehicle. |
Access the Complete guide! |