Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Plymouth Breeze car and truck
repair procedures including Plymouth engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Plymouth Breeze automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Plymouth Breeze
- 1997 Plymouth Breeze 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 1997 Plymouth Breeze 2.0 L4 GAS, CC:1996, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
BRAKE SERVICE PROCEDURES FOR 1997 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Plymouth Breeze cars and light trucks from 1990+.
Anti-Lock Brakes -> Type 2-Bendix ABX-4 Anti-Lock Braking System -> Precautions -> Pump/Motor Service -> System Service
Vehicle: 1997 Plymouth Breeze 2.4 L4 GAS
System Service
General service precautions should be followed when servicing the ABS system. Failure to do so may cause ABS system component failure. Service precautions are as follows:
- Many ABS system components are not independently serviceable and must be replaced with their respective assemb...
CLICK HERE TO GET FULL ACCESS TO 1997 Plymouth Breeze BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Plymouth Breeze cars and light trucks from 1990+.
Anti-Lock Brakes -> Type 2-Bendix ABX-4 Anti-Lock Braking System -> System Service -> Brake System Bleed -> Breeze, Cirrus, Sebring Convertible & Stratus -> Component Replacement -> Controller Anti-Lock Brake (CAB) -> Front -> Hydraulic Control Unit (HCU) -> Installation -> Neon -> Rear -> Relay Box -> Removal -> Wheel Speed Sensor
Vehicle: 1997 Plymouth Breeze 2.0 L4 GAS
Brake System Bleed
The BENDIX ABX-4 anti-lock brake system must be bled as two independent braking systems. The non ABS portion of the brake system should be bled the same as any non ABS system. The ABS portion of the system requires the use of a DRB or equivalent scan tool.
- To bleed the non ABS portion of the system using a pressure bleeder, proceed as follows:
- Connect pressure bleeder tool No. C-3496-B, or equivalent, and adapter BB400-9A or equivalent to pressurize brake system. Follow manufactures instructions, for use of pressure bleeding equipment.
- Attach clear hose to bleeder ...
CLICK HERE TO GET FULL ACCESS TO 1997 Plymouth Breeze BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Plymouth Breeze cars and light trucks from 1990+.
Anti-Lock Brakes -> Type 2-Bendix ABX-4 Anti-Lock Braking System -> Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Connector Identification -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation
Vehicle: 1997 Plymouth Breeze 2.4 L4 GAS
Accessing Diagnostic Trouble Codes
A DRB or equivalent scan tool is necessary to access the ABS diagnostic trouble codes. Connect the scan tool to the Data Link Connector (DLC) located under the lefthand side of the instrument panel, Figs. and . The diagnostic cycle begins when the ignition key is turned to the ON position.
Diagnostic Trouble Code Interpretation
There are two types of diagnostic trouble codes that can be set: "Latching" and "Non-Latching." A latching code will turn on the ABS warning lamp and disable the ABS system until the ignition switch is reset. A non-latchin...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 1997 Plymouth Breeze BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Plymouth Breeze cars and light trucks from 1990+.
Disc Brakes -> Type 3-Allied Signal Dual Pin Floating Caliper Disc Brake, Front -> Caliper Specifications
Vehicle: 1997 Plymouth Breeze 2.4 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1997 Plymouth Breeze BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Plymouth Breeze cars and light trucks from 1990+.
Anti-Lock Brakes -> Type 4-Teves Mark 20 Anti-Lock Braking System -> Diagnosis & testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation
Vehicle: 1997 Plymouth Breeze 2.0 L4 GAS
Accessing Diagnostic Trouble Codes
To access diagnostic trouble codes using a DRB or equivalent scan tool, turn the ignition switch off and connect the scan tool to the Data Link Connector (DLC) located under the lefthand side of th...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 1997 Plymouth Breeze BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Plymouth Breeze AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Plymouth Breeze cars and light trucks from 1990+.
Drum Brakes -> Type 1: Kelsey-Hayes & Varga Leading-Trailing Drum Brakes -> Adjustments -> Breeze, Cirrus & Stratus -> Concord, Intrepid, LHS, Neon, Sebring Convertible & Vision -> Except Breeze, Cirrus & Stratus -> Parking Brake -> Service Brake
Vehicle: 1997 Plymouth Breeze 2.0 L4 GAS
Service Brake
Breeze, Cirrus & Stratus
These vehicles are equipped with a fully automatic adjustment mechanism. In the event of brake shoe replacement the following initial adjustment procedure must be completed prior to driving the vehicle.
- Ensure parking brake lever is fully released.
- Depress brake pedal as far as possible 2-3 times. This will cause automatic adjuster to correctly adjust rear brakes.
- Apply and release park brake lever one time after service brakes have been adjusted.
Except Breeze, Cirrus & Stratus
- Raise and support vehicle.
- Remove brake adjusting hole plug from rear brak...
CLICK HERE TO GET FULL ACCESS TO 1997 Plymouth Breeze BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1997 Plymouth Breeze vehicle.
|
| Access the Complete guide! |
